Owners Manual

Figure 102. Removing and installing the hard drive cage
a. hard drive cage
b. control panel assembly (2)
c. screw (2)
5. Disconnect all the cables connected to the hard drive backplane.
6. Remove the screws that secure the backplane to the hard drive cage.
7. Remove the backplane from the hard drive cage.
Figure 103. Removing and installing the backplane from the hard drive cage
a. hard drive cage
b. 3.5-inch backplane
c. screw (10)
Next steps
1. Install the hard drive backplane.
2. Install the hard drives.
3. Follow the procedure listed in the After working inside your system section.
Installing and removing system components
145