Owners Manual

Table 6. Status indicator codes (continued)
Component Indicator Condition
System identification indicator Steady blue IPMI using Chassis Identify Command On or ID Button Press
ID On
Blinking blue Only IPMI using Chassis Identify Command Blink On
Off IPMI using Chassis Identify Command Off or ID Button
Press ID Off
Related references
Front panel features and indicators on page 10
Back panel features and indicators on page 13
Power Supply Unit indicator codes
Each AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is present or whether a
power fault has occurred.
1400 W AC or HVDC Power supply units
Figure 10. PSU status indicators
1. PSU
2. AC power indicator
Table 7. 1400 W AC/1400 W HVDC PSUs indicators
Component Indicator Indicator
AC or DC power indicator Solid amber Fault (fault of any kind)
Solid green DC_OK (power good)
Blinking green AC_OK
Table 8. 1400 W AC or HVDC PSU indicators
Power Indicator Pattern Condition
Green A valid power source is connected to the PSU and the PSU is
operational.
Flashing green When the PSU firmware is being updated, the PSU LED
flashes green.
CAUTION: Do not disconnect the power cord or
unplug the PSU when updating firmware. If firmware
update is interrupted, the PSUs will not function.
16 Dell PowerEdge C6320 product overview