Owners Manual

Network Settings on page 46
System Information on page 37
Memory Settings on page 38
Processor Settings on page 40
SATA Settings on page 42
Integrated Devices on page 48
Serial Communication on page 50
System Profile Settings on page 52
Miscellaneous Settings on page 57
Related references
iDRAC Settings utility on page 58
Device Settings on page 59
Related tasks
System BIOS Settings details on page 36
Viewing System BIOS on page 36
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
Related concepts
System BIOS on page 35
Related tasks
System BIOS Settings details on page 36
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option
Description
System
Information
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor
Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
36 Pre-operating system management applications