Owners Manual

Option Description
Option Description
Model Specifies the drive model of the selected device.
Drive Type Specifies the type of drive attached to the SATA port.
Capacity Specifies the total capacity of the hard drive. This field is undefined for removable
media devices such as optical drives.
Related concepts
SATA Settings on page 42
Related tasks
Viewing SATA Settings on page 42
Boot Settings
You can use the Boot Settings screen to set the boot mode to either BIOS or UEFI. It also enables you to specify the boot
order.
Related concepts
System BIOS on page 35
Related references
Choosing the system boot mode on page 45
Related tasks
Boot Settings details on page 45
Viewing Boot Settings on page 44
Changing the boot order on page 46
Viewing Boot Settings
To view the Boot Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Boot Settings.
Related concepts
Boot Settings on page 44
Related references
Choosing the system boot mode on page 45
44
Pre-operating system management applications