Owners Manual

Figure 29. Removing and installing a 2.5-inch SSD from the 2.5-inch adapter bracket
a. 2.5-inch SSD
b. M3 screw (2)
c. 2.5-inch adapter
3. Place the adapter assembly into the 3.5-inch hard drive carrier.
4. Secure the adapter assembly to the 3.5-inch hard drive carrier with screws.
Figure 30. Removing and installing an adapter assembly from the hard drive carrier
a. adapter assembly
b. screw (3)
c. hard drive carrier
NOTE: Do not install screws in the screw holes on the side of SSD, which are occupied by the light pipe.
76 Installing and removing system components