Owners Manual

Figure 47. Installing the cooling shroud

3. Replace the cooling shroud into the system board assembly. Make sure that the four latches are properly engaged with the

heat sink bases and the latches click in place.

NOTE:

When installing the cooling shroud, make sure the arrow of the mark on the cooling shroud points to processor 1,

and keep the flat surface of the cooling shroud horizontal.

Figure 48. The top view of the installed cooling shroud

Next steps

1. Install the system board assembly.

2. Reconnect the peripherals and connect the system to the electrical outlet.

3. Turn on the system, including any attached peripherals.

Installing and removing system components