Owners Manual
Table Of Contents
- Dell EMC PowerEdge C6400 Installation and Service Manual
- Dell EMC PowerEdge C6400 overview
- Installing and removing enclosure components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Dell EMC PowerEdge C6420 sled
- Drives
- Power supply units
- System cover
- Backplane cover
- Cooling fans
- Power interposer board
- Chassis management board
- Linking board
- Midplane
- Drive cage
- Backplanes and expander board
- Control panel
- Thermal sensor board
- Getting help
- Documentation resources
NOTE: If the sled is not being replaced immediately, a sled blank must be installed to ensure proper cooling of the
system.
Installing a sled
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. If installed, remove the sled blank.
Steps
1. Align the sled to the enclosure horizontally to insert the sled into the enclosure.
Figure 20. Installing a sled
22
Installing and removing enclosure components