Owners Manual
Table Of Contents
- Dell EMC PowerEdge C6400 Installation and Service Manual
- Dell EMC PowerEdge C6400 overview
- Installing and removing enclosure components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Dell EMC PowerEdge C6420 sled
- Drives
- Power supply units
- System cover
- Backplane cover
- Cooling fans
- Power interposer board
- Chassis management board
- Linking board
- Midplane
- Drive cage
- Backplanes and expander board
- Control panel
- Thermal sensor board
- Getting help
- Documentation resources
Dell EMC PowerEdge C6400 overview
The PowerEdge C6400 is an ultra-dense 2U enclosure that can support up to four independent two-socket (2S) sleds. The
PowerEdge C6400 enclosure supports the following drive configurations:
● up to 24 x 2.5-inch SAS or SATA drives
● up to 8 x 2.5-inch NVMe drives, with 16 x 2.5-inch SAS or SATA drives
● up to 12 x 3.5-inch SAS or SATA drives
● diskless no backplane
Topics:
• Supported configurations
• Front view of the Dell EMC PowerEdge C6400 enclosure
• Front view of the control panels
• Back view of the enclosure with sleds
• Sled to hard drive mapping
• Expander zoning
• Diagnostic indicators
• Locating the Service Tag of your system
• System information label
Supported configurations
The PowerEdge C6400 system supports the following configurations:
1
Dell EMC PowerEdge C6400 overview 5