Users Guide

RAID disk created from the NVMe PCIe SSDs not appearing in
operating system environment, showing as partitioned disks
Description RAID disk created in UEFI mode from the NVMe PCIe SSDs are not discoverable in the operating system
mode.
Corrective Action Ensure that the partitioned drives are not deleted. Install the PERC S140 driver to see the RAID disks. See
Installing the drivers on page 39 for more information.
Cannot perform an Online Capacity Expansion or Reconfigure on a
virtual disk
Determine whether these physical/virtual disks were migrated from a legacy controller with mixed RAID levels. If so, Online
Capacity Expansion/Reconfigure by adding physical disk on such a set of physical disks is not allowed.
Unable to configure RAID on NVMe PCIe SSD using a third party
RAID configuration utility
Corrective Action Ensure that the NVMe is set on Non RAID mode. See Setting the NVMe PCIe SSDs to RAID mode on
page 39.
Troubleshooting your system 55