Owners Manual

2. Follow the procedure listed in After working inside your system.
Removing the riser card
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the expansion card riser assembly.
4. If installed, remove the expansion card.
Steps
1. Using the Phillips #2 screwdriver, remove the screws that secure the riser card to the expansion card bracket.
2. Lift the riser card away from the expansion card bracket.
Figure 51. Removing the riser card
Next steps
1. Install the riser card.
Installing the riser card
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
Steps
1. Place the riser card into the expansion card bracket.
2. Using the Phillips #2 screwdriver, tighten the screws that secure the riser card to the expansion card bracket.
102
Installing and removing enclosure components