Owners Manual

2. Hold the system board by the edges, and lift the system board away from the sled.
Figure 73. Removing the system board
Next steps
1. Install the system board.
Installing system board
Prerequisites
Follow the safety guidelines listed in Safety instructions
CAUTION:
To avoid damage to the system board, ensure that the system board does not touch the side walls of
the sled chassis, while sliding the system board into the sled.
Steps
1. Holding the system board by the edges, slide the system board into the sled.
2. Install the screws that secure the system board to the sled.
120
Installing and removing enclosure components