Reference Guide

Network Settings screen details
The Network Settings screen details are explained as follows:
About this task
Option Description
UEFI PXE
Settings
Options Description
PXE Device n (n
= 1 to 4)
Enables or disables the device. When enabled, a UEFI PXE boot option is created
for the device.
PXE Device n
Settings(n = 1 to
4)
Enables you to control the configuration of the PXE device.
Table 1. PXE Device n Settings screen details
Option Description
Interface Specifies the NIC interface used for this PXE
device.
Protocol Enables you to select protocol IPv4 or IPv6. This
is set to IPv4 by default.
VLAN Enables or Disable VLAN. This is set to Disabled
by default.
VLAN ID This is set to 1.
VLAN Priority This is set to 0.
UEFI HTTP
Settings
Options Description
HTTP Device (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI HTTP boot option is created
for the device.
HTTP Device n
Settings (n = 1 to
4)
Enables you to control the configuration of the HTTP device.
UEFI iSCSI
Settings
Enables you to control the configuration of the iSCSI device.
Table 2. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN
format.
iSCSI Device1 Enables or disables the iSCSI device. When
disabled, a UEFI boot option is created for the
iSCSI device automatically. This is set to by
default.
iSCSI Device1 Settings Enables you to control the configuration of the
iSCSI device.
TLS
Authentication
Configuration
View and/or modify this device's boot TLS authentication mode. None means the HTTP server and
the client will not authenticate each other for this boot. One way means the HTTP server will be
authenticated by the client, while the client will not be authenticated by the server. This option is set to
None by default.
14 Pre-operating system management applications