Reference Guide

Option Description
Network Settings Provides options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
Integrated
Devices
Provides options to manage integrated device controllers and ports, specifies related features and
options.
Serial
Communication
Provides options to manage the serial ports, their related features and options.
System Profile
Settings
Provides options to change the processor power management settings, and memory frequency.
System Security Provides options to configure the system security settings, such as system password, setup password,
Trusted Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the
system.
Redundant OS
Control
Sets the redundant OS information for redundant OS control.
Miscellaneous
Settings
Provides options to change the system date and time.
System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and BIOS
version.
Viewing System Information
To view the System Information screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
About this task
The System Information screen details are explained as follows:
Option
Description
System Model
Name
Specifies the system model name.
System BIOS
Version
Specifies the BIOS version installed on the system.
System
Management
Engine Version
Specifies the current version of the Management Engine firmware.
6 Pre-operating system management applications