Owners Manual

Figure 65. Removing the system board
Next steps
1. Install the system board.
Installing the system board
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
CAUTION:
To avoid damage to the system board, ensure that the system board does not touch the side walls of
the sled chassis, while sliding the system board into the sled.
Steps
1. Holding the system board by the edges and insert it at an angle and install it into the chassis.
2. To engage the ports with the slots on the chassis, push the system board to the rear of the chassis.
68
Installing and removing system components