C8220X_MIC5110P7120P_IG.
C8220X_MIC5110P7120P_IG.book Page 2 Monday, August 12, 2013 5:42 PM Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ____________________ Information in this publication is subject to change without notice. © 2013 Dell Inc.
C8220X_MIC5110P7120P_IG.book Page 3 Monday, August 12, 2013 5:42 PM Contents Important Safety Information . Recommended Tools . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . . . . . . . . . . . . . . . 5 Information You May Need . . . . . . . . . . . . . . . . . . . . . . Xeon Phi 5110P/7120P MIC Cards . . . . . . . . . . . . . . . . . . 6 6 7 Installing the Front Xeon Phi 5110P/7120P MIC card . . . Installing the Back Xeon Phi 5110P/7120P MIC card . . 11 . . . . . . . . . .
C8220X_MIC5110P7120P_IG.
C8220X_MIC5110P7120P_IG.book Page 5 Monday, August 12, 2013 5:42 PM Important Safety Information Observe the following safety precautions when installing Intel Xeon Phi 5110P/7120P Many Integrated Core (MIC) cards in the PowerEdge C8220X sled. WARNING: Working on systems that are still connected to a power supply can be extremely dangerous. CAUTION: The sled must be operated with the cover installed to ensure proper cooling.
C8220X_MIC5110P7120P_IG.book Page 6 Monday, August 12, 2013 5:42 PM Information You May Need For information about system features, troubleshooting, and component replacement, see the PowerEdge C8220X Hardware Owner’s Manual. This document is available at dell.com/support/manuals. Xeon Phi 5110P/7120P MIC Cards 1 Remove the sled from the PowerEdge C8000 server enclosure. For detailed information on removing the sled, see the PowerEdge C8220X Hardware Owner’s Manual.
C8220X_MIC5110P7120P_IG.book Page 7 Monday, August 12, 2013 5:42 PM Installing the Front Xeon Phi 5110P/7120P MIC card 1 Remove the four M3 screws securing the air baffles. 2 Lift the air baffles out of the sled cover. Figure 1-2. Removing the Air Baffles 2 1 3 4 1 M3 screws (4) 2 right air baffle 3 left air baffle 4 GPGPU blank 3 Remove the four M3 screws securing the mounting brackets. 4 Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.
C8220X_MIC5110P7120P_IG.book Page 8 Monday, August 12, 2013 5:42 PM 6 Align the right air baffle with the screw holes on the front of the sled cover. 7 Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to 5.21 in-lbs. Figure 1-4. Installing the Right Air Baffle 2 1 1 M3 screws (2) 2 right air baffle 8 Remove the four screws securing the MIC card bracket. 9 Lift the bracket from the MIC card. Save the bracket for future use. Figure 1-5.
C8220X_MIC5110P7120P_IG.book Page 9 Monday, August 12, 2013 5:42 PM 10 Align the front mounting bracket with the screw holes on the left of the MIC card and secure with four M3 screws. Tighten the screws to 5.21 in-lbs. 11 Align the back mounting bracket with the screw holes on the right of the MIC card and secure with four M3 screws. Tighten the screws to 5.21 in-lbs. Figure 1-6.
C8220X_MIC5110P7120P_IG.book Page 10 Monday, August 12, 2013 5:42 PM 13 Align and insert the MIC card assembly into the front GPGPU card riser connector until the card is fully seated. 14 Secure the MIC card to the front of the sled cover using the four M3 screws, working in a clockwise sequence. Tighten the screws to 5.21 in-lbs. Figure 1-8.
C8220X_MIC5110P7120P_IG.book Page 11 Monday, August 12, 2013 5:42 PM Installing the Back Xeon Phi 5110P/7120P MIC card 1 Release the cables from the retaining clips and slightly lift the cables to access the screws on the sled cover. Figure 1-10. Releasing the Power Cables 1 1 power cables 2 Remove the four M3 screws securing the air baffles. 3 Lift the air baffles out of the sled cover. Figure 1-11.
C8220X_MIC5110P7120P_IG.book Page 12 Monday, August 12, 2013 5:42 PM 4 Remove the four M3 screws securing the mounting brackets. 5 Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets. 6 Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use. NOTE: Be careful not to damage the twin axial cable on the back GPGPU card riser when removing the top cover. Figure 1-12.
C8220X_MIC5110P7120P_IG.book Page 13 Monday, August 12, 2013 5:42 PM 9 Remove the four screws securing the MIC card bracket. 10 Lift the bracket from the MIC card. Save the bracket for future use. Figure 1-14. Removing the MIC Card Bracket 2 1 3 1 screws (4) 3 MIC card 2 MIC card bracket 11 Align the front mounting bracket with the screw holes on the left of the MIC card and secure with four M3 screws. Tighten the screws to 5.21 in-lbs.
C8220X_MIC5110P7120P_IG.book Page 14 Monday, August 12, 2013 5:42 PM 13 Connect the power cables to the MIC card. Ensure the cables are properly attached. See Figure 1-19 for the cable routing diagram. Figure 1-16. Connecting the Power Cables 1 1, 2 2 power cables 14 Align and insert the MIC card assembly into the back GPGPU card riser connector until the card is fully seated. 15 Secure the MIC card to the back of the sled cover using the four M3 screws, working in a clockwise sequence.
C8220X_MIC5110P7120P_IG.book Page 15 Monday, August 12, 2013 5:42 PM 16 Align the left air baffle with the screw holes on the back of the sled cover. 17 Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to 5.21 in-lb. 18 Route the power cables along the inside wall of the sled cover. 19 Secure the cables to the retaining clips. Figure 1-18.
C8220X_MIC5110P7120P_IG.book Page 16 Monday, August 12, 2013 5:42 PM Cable Routing Diagram NOTE: Route the cables properly inside the sled to prevent the cables from being pinched or crimped. Figure 1-19.
C8220X_MIC5110P7120P_IG.
C8220X_MIC5110P7120P_IG.
C8220X_MIC5110P7120P_IG.
C8220X_MIC5110P7120P_IG.book Page 20 Monday, August 12, 2013 5:42 PM Printed in the U.S.A. ww w.d el l .c o m | s up p or t . de l l.