Users Guide
Installing NVMe PCIe SSD adapter in system
CAUTION: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came
with the product.
NOTE: To determine which PCIe slot and which size of bracket to use, consult the slot priority matrix in your server Owner’s
Manual. Following the slot priority matrix ensures that the optimal PCIe slot is selected to maximize performance.
1 Turn o the system, including any attached peripherals, and disconnect the system from the electrical outlet.
NOTE: Dell recommends that you always use a static mat and static strap while working on components in the interior
of the system.
2 Open the system.
CAUTION: To prevent damage to the adapter, you must hold the adapter by its edges only.
3 Determine which bracket, half height or full height, is required, and install the appropriate bracket.
4 Align the card-edge connector with the connector on the system board.
5 Press the card edge down until the adapter is fully seated.
6 Close the system.
7 Reconnect the system to its electrical outlet and attached peripherals, and turn on the system.
Replacing and
conguring hardware for NVMe PCIe SSD adapter 11