Owners Manual

Boot Settings on page 24
Network Settings on page 26
System Security on page 28
System Information on page 32
Memory Settings on page 34
Processor Settings on page 35
SATA Settings on page 37
Integrated Devices on page 38
Serial Communication on page 40
System Profile Settings on page 41
Miscellaneous Settings on page 43
iDRAC Settings utility on page 44
Device Settings on page 45
Related tasks
Viewing System BIOS on page 23
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
Related references
System BIOS on page 22
System BIOS Settings details on page 23
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option
Description
System
Information
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor
Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot
settings.
Network Settings Specifies options to change the network settings.
Pre-operating system management applications 23