Owners Manual

3. cooling shroud 4. cooling shroud guide
5. cooling shroud guide slot on chassis
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system on page 48
Installing the cooling shroud on page 53
After working inside your system on page 49
Installing the cooling shroud
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the cooling shroud to service other components inside the system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Align the cooling shroud guide with the guide slot on the chassis.
2. Press the cooling shroud into the system until the release latch engages with the slot on the chassis and clicks into place.
Installing and removing sled components
53