Owners Manual

Figure 16. Installing the PCIe mezzanine card
1.
screw hole on SSD cage (2) 2. external storage connector (2)
3. PCIe mezzanine bridge card 4. Screw (2)
5. PCIe mezzanine card 6. SSD cage
Next steps
1. Install the SSD cage.
2. If applicable, reconnect the disconnected storage devices.
3. If applicable, reconnect the disconnected USB devices.
4. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system on page 48
Removing the SSD cage on page 92
Removing the PCIe mezzanine card on page 63
Installing the SSD cage on page 93
After working inside your system on page 49
Internal Dual SD Module (IDSDM) card
The IDSDM card provides one SD card slot, one vFlash card slot, and a shared USB interface for the embedded hypervisor. This
card offers the following features:
● Single card operation—single card operation is supported, but without redundancy.
● Dual card operation—dual card operation is supported and can be configured with redundancy.
66
Installing and removing sled components