Owners Manual

Figure 19. Removing the IDSDM card
1.
screw (2) 2. screw hole (2)
3. standoff (1) 4. SSD cage
5. IDSDM card
Next steps
1. Install the SSD cage.
2. Install the IDSDM card.
3. If applicable, install the SD cards.
4. Reconnect any disconnected USB devices.
5. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system on page 48
Removing an internal SD card on page 67
Removing the SSD cage on page 92
Installing the SSD cage on page 93
Installing the IDSDM card on page 70
Installing an internal SD card on page 68
After working inside your system on page 49
Installing the IDSDM card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
70 Installing and removing sled components