Owners Manual

Figure 3. Front panel view—dual SSD system
1. USB port 2. USB management port or iDRAC Direct port
3. SSD 4. Sled power-on indicator, power button
Table 2. Front panel features and indicators—dual SSD system
Item Indicator, button, or
connector
Icon Description
1 USB port Enables you to connect USB devices to the sled. This port is USB
3.0 compliant.
2 USB management port or
iDRAC Direct port
Enables you to connect USB devices to the sled or provides
access to the iDRAC Direct features. For more information about
iDRAC, see the iDRAC Guide at Dell.com/idracmanuals. This
port is USB 2.0 compliant.
3 SSD (2) Up to two 1.8-inch hot-swappable uSATA SSDs are supported in
this chassis.
4 Sled power-on indicator,
power button
The power-on indicator turns on when the sled is turned on. The
power button controls the power supply output to the system.
Diagnostic indicators on the front panel
Health status indicator
The Health status indicator indicates the health condition of the system.
Table 3. Health status indicator codes
Icon Health-status indicator
pattern
Condition
Solid blue No errors are present in the system. System is in good health.
Blinking blue Identify mode is enabled (regardless of system errors)—system
is in the process of identifying the sled.
Solid amber System is in failsafe mode—sled is not ready/available and the
chassis cannot be turned on.
Flashes amber Errors present in the system.
8 PowerEdge FC430 system overview