Owners Manual

Removing an SSD blank on page 91
Installing an SSD into an SSD carrier on page 88
After working inside your system on page 49
Removing an SSD carrier on page 89
Removing an SSD blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To maintain proper system cooling, all empty SSD slots must have a SSD blank installed.
Follow the safety guidelines listed in the Safety instructions section.
Steps
Press the release latch and slide the SSD blank out of the SSD slot.
Figure 35. Removing an SSD blank
a. SSD blank
b. release latch
Next steps
Install the SSD
Related references
Safety instructions on page 48
Related tasks
Before working inside your system on page 48
Installing an SSD carrier on page 90
After working inside your system on page 49
Installing an SSD blank on page 92
Installing and removing sled components
91