CLI Guide
where valid options are -i and --all.
racadm jobqueue create <fqdd> [-r <reboot type> ] [-s <start
time> ] [-e <expiry time>]
racadm jobqueue create <fqdd> [-r <reboot type>] [-s <start time>]
[-e <expiration time>] [--realtime]
Input
• -i — Specifies a job ID that is displayed or deleted.
NOTE: The value JID_CLEARALL will force delete all the possible jobs in the queue.
• --all — The job IDs that are not applicable are deleted.
• -fqdd — Specifies an FQDD for which a job should be created.
•
—r <reboot type> — Specifies a reboot type.
•
none — No Reboot Job. This option is the default value.
• pwrcycle — Power cycle.
• graceful — Graceful Reboot without forced shut down.
• forced — Graceful Reboot with forced shut down.
• start time — Specifies a start time for job scheduled in the yyyymmddhhmmss format.
TIME_NOW means immediate. Next Reboot means job is in scheduled state until the next
manual restart.
• expiry time — Specifies expiry time for the job execution in the yyyymmddhhmmss format.
The job must start by this time. TIME_NA means expiry time is not applicable.
• --realtime — Specifies the real time job.
NOTE:
• --realtime is applicable for storage configuration commands run on systems
with PERC 9 cards with firmware version 9.1 and later.
• -r option is not valid for real time configuration.
Example
• View jobs in the current job queue.
racadm jobqueue view
• View status of a specific job ID.
racadm jobqueue view -i <JobID>
• Issue configuration changes for a PERC controller then start a real time job to execute the
changes.
racadm set RAID.Slot.3-1.RAIDdefaultWritePolicy WriteBack
racadm set RAID.Slot.3-1.Name “Prod Workload”
racadm jobqueue create RAID.Slot.3-1 –realtime
• Delete all possible jobs from the current job queue.
racadm jobqueue delete --all
• Delete a specific job from the current job queue.
racadm jobqueue delete -i <JobID>
• To clear all the jobs in the job queue.
racadm jobqueue delete –i JID_CLEARALL
• Create a Job for the provided FQDD and add to the job queue.
racadm jobqueue create NIC.Integrated.1-1 -r pwrcycle -s
TIME_NOW -e 20120501100000
88
RACADM Subcommand Details