CLI Guide

BIOS.DebugMenuSetting.DebugErrorLevel (Read or Write)
Description
This field controls serial DEBUG output level for certain drivers. The value overrides the platform
PcdDebugPrintErrorLevel PCD value. The value is a 32-bit bit mask of the following values: DEBUG_INIT
0x00000001 DEBUG_WARN 0x00000002 DEBUG_LOAD 0x00000004 DEBUG_FS 0x00000008
DEBUG_POOL 0x00000010 DEBUG_PAGE 0x00000020 DEBUG_INFO 0x00000040 DEBUG_DISPATCH
0x00000080 DEBUG_VARIABLE 0x00000100 DEBUG_BM 0x00000400 DEBUG_BLKIO 0x00001000
DEBUG_NET 0x00004000 DEBUG_UNDI 0x00010000 DEBUG_LOADFILE 0x00020000 DEBUG_EVENT
0x00080000 DEBUG_GCD 0x00100000 DEBUG_CACHE 0x00200000 DEBUG_VERBOSE 0x00400000
DEBUG_ERROR 0x80000000 If the Field is clear, the platform PcdDebugPrintErrorLevel PCD value is
used.
Legal Values
● N/A
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.DebugMenuSetting.DirectoryAtoS (Read or Write)
Description
"AtoS optimization reduces remote read latencies for repeat read accesses without intervening writes."
Legal Values
● Enabled
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.DebugMenuSetting.DirectoryMode (Read or Write)
Description
Enable or disable directory mode. Useful for Cscript error injection.
Legal Values
● Enabled
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.DebugMenuSetting.EmbSataRSTeDebug (Read or Write)
Description
Enable Hot Plug for SATA ports of the embedded SATA controllers.
Is located in Debug Menu, which is hidden after RTS.
Legal Values
● Enabled
● Disabled
Default Value Not Applicable
Write Privilege Server Control
BIOS Attributes 111