CLI Guide

iDRAC.SerialRedirection
This group contains the attributes that provides details about iDRAC Serial Redirection.
NOTE: This is supported only for rack and tower systems.
iDRAC.SerialRedirection.AutoEnable (Read or Write)
Description
Attribute for AutoEnable
Legal Values
● Disable-0
● Enable-1
Default Value 0
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
iDRAC.SerialRedirection.Enable (Read or Write)
Description
Enables or Disables the console for COM2 port redirection
Legal Values
● Disabled-0
● Enabled-1
Default Value 1
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
iDRAC.SerialRedirection.QuitKey (Read or Write)
Description
This key or key combination terminates the Virtual Console when using the console COM2 command. The
valid quitkey should start with ^ and has to end with any of the following characters: 'a-zA-Z[]^_' (i.e.
letter or one of 5 special characters).
Legal Values
● String of up to 2 ASCII characters.
Default Value ^
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
iDRAC.ServerBoot
This group contains the attributes that provides details about iDRAC server boot.
iDRAC Attributes
681