CLI Guide

Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DeviceLevelConfig.STagEtherType (Read or Write)
Description
Specifies the EtherType to be used by all partitions on the port when Advanced NPar S-tagging is enabled
in the Virtualization Mode setting. NOTE: This attribute shall only be implemented when Advanced NPar is
supported.
Legal Values
● 0x88a8
● 0x9100
Default Value 0x88a8
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DeviceLevelConfig.TotalNumberLogicalPorts (Read or Write)
Description
Indicates total number of logical ports across all physical ports that are supported per device. Logical
ports are distributed equally across physical ports
Legal Values
● 2
● 8
Default Value 2
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DeviceLevelConfig.VFAllocBasis (Read Only)
Description
Defines the domain in which Virtual Functions are allocated; either Port or Device. Note: A device which
implements less than 1 PF per physical port must use Device level VF allocation.
Legal Values
● Port
● Device
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DeviceLevelConfig.VFAllocMult (Read Only)
Description
Defines the multiple (e.g. x1, x4, x8, etc.) in which VFs must be allocated to a PF.
Legal Values None
NIC Attributes 897