CLI Guide

NIC.IscsiGenParams.ChapAuthEnable (Read or Write)
Description
Setting to enable CHAP Authentication for iSCSI initiator.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.ChapMutualAuth (Read or Write)
Description
Setting to enable mutual CHAP authentication between the iSCSI initiator and target.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.DhcpVendId (Read or Write)
Description
Vendor ID as presented to DHCP service.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.FirstHddTarget (Read or Write)
Description
Enable/Disable the target appearing as the first hard disk drive (HDD) in the system when iSCSI booting.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.IpAutoConfig (Read or Write)
Description
Setting to enable acquisition of IPv6 TCP/IP parameters from DHCP.
NIC Attributes 911