API Guide
Table Of Contents
- iDRAC8 with Lifecycle Controller Version 2.70.70.70 Redfish API Guide
- Contents
- Overview
- Redfish-based systems management
- Redfish resources
- AccountService
- DellJobCollection
- AttributeRegistry
- BaseMessages
- AssemblyCollection
- Chassis
- ComputerSystem
- DellJob
- EventDestination
- Bios
- BIOS-Settings resource
- BootOption
- ChassisCollection
- ComputerSystemCollection
- LogEntry
- Manager
- ManagerAccount
- Memory collection
- DellBootSources
- Settings resource
- DellBootSourcesRegistry
- DellUpdateService
- DellManager
- Drive
- EthernetInterfaceCollection
- NetworkAdapter collection
- NetworkInterface collection
- EthernetInterfaces
- EventService
- FabricCollection
- PCIe
- HostInterfaceCollection
- JSONSchemas
- LogEntryCollection
- LogService
- LogServiceCollection
- ManagerCollection
- ManagerAccountCollection
- ManagerNetworkProtocol
- MemoryCollection
- MessageRegistryFile
- MessageRegistryFileCollection
- Messages
- NetworkAdapterCollection
- NetworkInterfaceCollection
- PCIeDevice
- PCIeFunction
- Processor
- Port
- PortCollection
- Power
- PrivilegeRegistry
- ProcessorCollection
- Role
- RoleCollection
- SecureBoot
- SerialInterfaceCollection
- ServiceRoot
- Session
- SessionService
- SimpleStorage
- SoftwareInventoryCollection
- SerialInterfaces
- StorageCollection
- Storage collection
- Subscriptions
- Switches
- TaskCollection
- TaskService
- Thermal
- UpdateService
- VirtualMedia
- VLanNetworkInterface
- VolumeCollection
- NetworkPort
- NetworkPortCollection
- NetworkDeviceFunctionCollection
- Redundancy
- Examples
Table 109. Parameters for NetworkDeviceFunction Settings (continued)
Parameter Type Description
PrimaryVLANId Int64 The 802.1q VLAN ID to use for iSCSI boot
from the primary target. This VLAN ID is only
used if PrimaryVLANEnable is true.
PrimaryDNS String The IPv6 or IPv4 address of the primary DNS
server for the iSCSI boot initiator.
SecondaryTargetName String The name of the Secondary iSCSI boot target
(iSCSI Qualified Name, IQN).
SecondaryTargetIPAddress String The IP address (IPv6 or IPv4) for the
Secondary iSCSI boot target.
SecondaryTargetTCPPort Int64 The TCP port for the Secondary iSCSI boot
target.
SecondaryLUN Int64 The logical unit number (LUN) for the
Secondary iSCSI boot target.
SecondaryVLANEnable Boolean It indicates if this VLAN is enabled for the
Secondary iSCSI boot target.
SecondaryVLANId Int64 The 802.1q VLAN ID to use for iSCSI boot
from the Secondary target. This VLAN ID is
only used if SecondaryVLANEnable is true.
SecondaryDNS String The IPv6 or IPv4 address of the Secondary
DNS server for the iSCSI boot initiator.
IPMaskDNSViaDHCP Boolean A boolean indicating whether the iSCSI boot
initiator uses DHCP to obtain the iniator name,
IP address, and netmask.
AuthenticationMethod NetworkDeviceFunction.v1_0_0.Authenticatio
nMethod
The iSCSI boot authentication method for this
network device function.
CHAPUsername String The username for CHAP authentication.
CHAPSecret String The shared secret for CHAP authentication.
Status codes
Table 110. Status codes
HTTP status code Extended information Error message code
200
202
400
● Base.1.0.PropertyValueTypeError
● Base.1.0.PropertyUnknown
403 Base.1.0.InsufficientPrivilege RAC0506
405 Base.1.0.GeneralError SYS402
500 Base.1.0.InternalError
Redfish resources 83