Owners Manual

2. Follow the procedure listed in the Before working inside your system section.
Steps
Pull the rails on the side of the carrier and lift the SSD out of the carrier.
Results
Figure 51. Removing a 1.8-inch SSD in a 1.8-inch SSD carrier
1. SSD carrier
2. SSD
Next steps
1. Install a 1.8-inch SSD in a 1.8-inch SSD carrier.
2. Follow the procedure listed in the After working inside your system section.
Related references
Instrucciones de seguridad on page 50
Related tasks
Before working inside your system on page 51
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier on page 108
Después de trabajar en el interior de su equipo on page 51
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the SSD from a SSD carrier to replace a faulty SSD from a SSD carrier.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove a 1.8-inch SSD from a 1.8-inch SSD carrier.
Steps
Insert the SSD into the SSD carrier with the connector end of the SSD toward the back. When aligned correctly, the back of the
SSD is flush with the back of the SSD carrier.
108
Instalación y extracción de componentes del sled