Users Guide
2. 运行 DUP。
固件将更新。固件更新完成后无需重新启动系统。
使用远程 RACADM 更新固件
1. 将固件映像下载到 TFTP 或 FTP 服务器,例如:C:\downloads\firmimg.d7
2. 运行以下 RACADM 命令:
TFTP 服务器:
● 使用 fwupdate 命令:
racadm -r <iDRAC IP address> -u <username> -p <password> fwupdate -g -u -a <path>
path
是 TFTP 服务器上存储 firmimg.d7 的位置。
● 使用 update 命令:
racadm -r <iDRAC IP address> -u <username> -p <password> update —f <filename>
FTP 服务器:
● 使用 fwupdate 命令:
racadm -r <iDRAC IP address> -u <username> -p <password> fwupdate –f <ftpserver IP>
<ftpserver username> <ftpserver password> –d <path>
path
是 FTP 服务器上存储 firmimg.d7 的位置。
● 使用 update 命令:
racadm -r <iDRAC IP address> -u <username> -p <password> update —f <filename>
有关更多信息,请参阅 dell.com/idracmanuals 上提供的 iDRAC RACADM Command Line Interface Reference Guide
(iDRAC RACADM 命令行界面参考指南)。
使用 Lifecycle Controller 远程服务更新固件
有关使用 Lifecycle Controller–Remote Services 更新固件的信息,请参阅 dell.com/idracmanuals 上提供的 Lifecycle
Controller Remote Services
快速入门指南
。
从 iDRAC 更新 CMC 固件
在 PowerEdge FX2/FX2s 机箱中,可以从 iDRAC 为 Chassis Management Controller 以及任何可由 CMC 更新和服务器共享的组
件更新固件。
应用更新之前,请确保:
● 不允许 CMC 开启服务器电源。
● 带 LCD 的机箱必须显示一条指示“正在更新”的消息。
● 不带 LCD 的机箱必须使用 LED 闪烁模式表示更新的进展。
● 在更新过程中,机箱操作电源命令被禁用。
对于某些需要所有服务器处于空闲状态的的组件(如 IOM 的 Programmable System-on-Chip (PSoC))的更新,将在机箱下次通
电开机时才应用。
设置 CMC 以从 iDRAC 更新 CMC 固件
在 PowerEdge FX2/FX2s 机箱中,在从 iDRAC 更新 CMC 及其共享组件的固件前,请先执行以下操作:
1. 启动 CMC Web 界面
设
置受管系统和管理站 65