Users Guide

Related tasks
Enabling SSL on domain controller on page 131
Enabling SSL on domain controller
When iDRAC authenticates users with an Active Directory domain controller, it starts an SSL session with the domain controller.
At this time, the domain controller must publish a certificate signed by the Certificate Authority (CA)—the root certificate of
which is also uploaded into iDRAC. For iDRAC to authenticate to any domain controller—whether it is the root or the child
domain controller—that domain controller must have an SSL-enabled certificate signed by the domain’s CA.
If you are using Microsoft Enterprise Root CA to automatically assign all your domain controllers to an SSL certificate, you must:
1. Install the SSL certificate on each domain controller.
2. Export the Domain Controller Root CA Certificate to iDRAC.
3. Import iDRAC Firmware SSL Certificate.
Related tasks
Installing SSL certificate for each domain controller on page 131
Exporting domain controller root CA certificate to iDRAC on page 131
Importing iDRAC firmware SSL certificate on page 132
Installing SSL certificate for each domain controller
To install the SSL certificate for each controller:
1. Click Start > Administrative Tools > Domain Security Policy.
2. Expand the Public Key Policies folder, right-click Automatic Certificate Request Settings and click Automatic
Certificate Request.
The Automatic Certificate Request Setup Wizard is displayed.
3. Click Next and select Domain Controller.
4. Click Next and click Finish. The SSL certificate is installed.
Exporting domain controller root CA certificate to iDRAC
NOTE: If your system is running Windows 2000 or if you are using standalone CA, the following steps may vary.
To export the domain controller root CA certificate to iDRAC:
1. Locate the domain controller that is running the Microsoft Enterprise CA service.
2. Click Start > Run.
3. Enter mmc and click OK.
4. In the Console 1 (MMC) window, click File (or Console on Windows 2000 systems) and select Add/Remove Snap-in.
5. In the Add/Remove Snap-In window, click Add.
6. In the Standalone Snap-In window, select Certificates and click Add.
7. Select Computer and click Next.
8. Select Local Computer, click Finish, and click OK.
9. In the Console 1 window, go to Certificates Personal Certificates folder.
10. Locate and right-click the root CA certificate, select All Tasks, and click Export....
11. In the Certificate Export Wizard, click Next, and select No do not export the private key.
12. Click Next and select Base-64 encoded X.509 (.cer) as the format.
13. Click Next and save the certificate to a directory on your system.
14. Upload the certificate you saved in step 13 to iDRAC.
Configuring user accounts and privileges
131