Users Guide

● Enhanced Embedded Management through Lifecycle Controller – Lifecycle Controller provides deployment and simplified
serviceability through Lifecycle Controller GUI for local deployment and Remote Services (WS-Management) interfaces for
remote deployment integrated with Dell OpenManage Essentials and partner consoles.
For more information on Lifecycle Controller GUI, see Lifecycle Controller User’s Guide and for remote services, see Lifecycle
Controller Remote Services User’s Guide available at dell.com/idracmanuals.
Key features
The key features in iDRAC include:
NOTE: Some of the features are available only with iDRAC Enterprise license. For information on the features available for a
license, see Managing licenses.
Inventory and Monitoring
● View managed server health.
● Inventory and monitor network adapters and storage subsystem (PERC and direct attached storage) without any operating
system agents.
● View and export system inventory.
● View sensor information such as temperature, voltage, and intrusion.
● Monitor CPU state, processor automatic throttling, and predictive failure.
● View memory information.
● Monitor and control power usage.
● Support for SNMPv3 gets and alerts.
● For blade servers: launch Chassis Management Controller (CMC) web interface, view CMC information, and WWN/MAC
addresses.
NOTE:
CMC provides access to iDRAC through the M1000E Chassis LCD panel and local console connections. For more
information, see Chassis Management Controller User’s Guide available at dell.com/support/manuals.
● View network interfaces available on host operating systems.
● View inventory and monitor information and configure basic iDRAC settings using iDRAC Quick Sync feature and a mobile
device.
Deployment
● Manage vFlash SD card partitions.
● Configure front panel display settings.
● Manage iDRAC network settings.
● Configure and use virtual console and virtual media.
● Deploy operating systems using remote file share, virtual media, and VMCLI.
● Enable auto-discovery.
● Perform server configuration using the export or import XML profile feature through RACADM and WSMAN. For more
information, see the Lifecycle Controller Remote Services Quick Start Guide.
● Configure persistence policy for virtual addresses, initiator, and storage targets.
● Remotely configure storage devices attached to the system at run-time.
● Perform the following operations for storage devices:
○ Physical disks: Assign or unassign physical disk as a global hot spare.
○ Virtual disks:
￭ Create virtual disks.
￭ Edit virtual disks cache policies.
￭ Check virtual disk consistency.
￭ Initialize virtual disks.
￭ Encrypt virtual disks.
￭ Assign or unassign dedicated hot spare.
￭ Delete virtual disks.
○ Controllers:
￭ Configure controller properties.
￭ Import or auto-import foreign configuration.
￭ Clear foreign configuration.
￭ Reset controller configuration.
Overview
15