Owners Manual

Figure 14. Cooling fan indicators
1. status indicator
Configuration wizard
The Chassis Management Controller (CMC) is pre-configured to use a static IP address. To use Dynamic Host Configuration
Protocol (DHCP):
1. Access the Chassis Management Controller (CMC).
2. Click Network.
3. Click IPv4 or IPv6.
4. Select DHCP Enable.
For more information, see the Dell PowerEdge FX2/FX2s CMC User’s Guide at Dell.com/esmmanuals.
System messages
The CMC web interface displays system messages to notify you of possible problems related to the enclosure and to the sleds
in the enclosure. For a detailed listing of these error messages, including possible causes and solutions, see the Dell Event and
Error Messages Reference Guide at Dell.com/openmanagemanuals → OpenManage software.
Documentation matrix
The documentation matrix provides information about documents that you can refer to, for setting up and managing your
system.
Table 6. Documentation matrix
To... See...
Install your system into a rack Rack documentation included with your rack solution
Set up your system and know the technical specifications of
your system
Getting Started Guide
Install the operating system Operating system documentation at Dell.com/
operatingsystemmanuals
About your Dell PowerEdge FX2/FX2s 17