CLI Guide
• -s <start time> — Specifies the start time for the scheduled job in yyyymmddhhmmss format. The
default value TIME_NOW starts the job immediately.
• -e <expiration time> — Specifies the expiry time for the scheduled job in yyyymmddhhmmss format.
The default value TIME_NA does not apply the waiting time.
NOTE: For the diagnostic report run operation, the time difference between the -s and -e options
must be more than five minutes.
Output Provides the Job ID for the diagnostic operation.
Examples
• To initiate a remote diagnostic operation:
racadm diagnostics run -m 1 -r forced -s 20121215101010 -e TIME_NA
• To export a remote diagnostics report to CIFS share:
racadm diagnostics export -f diagnostics -l //192.168.0/cifs -u
administrator -p xxx
• To export a remote diagnostics report to NFS share:
racadm diagnostics export -f diagnostics -l 192.168.0:/nfs -u
administrator -p xxx
eventfilters
Table 17. Details of eventfilters
Description Displays the list of event filter settings.
To use this subcommand with the set and test option, you must have the Administrator privilege.
Synopsis
racadm eventfilters <eventfilters command type>
racadm eventfilters get -c <alert category>
racadm eventfilters set -c <alert category> -a <action> -n <notifications>
racadm eventfilters set -c <alert category> -a <action> -r <recurrence>
racadm eventfilters test -i <Message ID to test>
NOTE: The general format of an alert category:
idrac.alert.category.[subcategory].[severity]
where, category is mandatory, but subcategory and severity are optional. A severity cannot precede
a subcategory.
Valid Category values are:
• All
• System
• Storage
• Updates
• Audit
• Config
• Worknotes
Valid Severity values are:
RACADM Subcommand Details
53