Owners Manual
電源ユニットの取り付け on page 52
ストレージスレッドの取り付け on page 40
コンピュートスレッドの取り付け on page 37
関連情報
ミッドプレーンアセンブリの取り外し on page 70
電源インタポーザボード
電源インタポーザボードの取り外し
前提条件
注意: 修理作業の多くは、認定されたサービス技術者のみが行うことができます。製品マニュアルで許可されている範囲
に限り、またはオンラインサービスもしくは電話サービスとサポートチームの指示によってのみ、トラブルシューティン
グと簡単な修理を行うようにしてください。デルで認められていない修理(内部作業)による損傷は、保証の対象となり
ません。製品に付属しているマニュアルの「安全にお使いいただくために」をお読みになり、指示に従ってください。
メモ: これは、フィールド交換可能ユニット(FRU)です。取り外しおよび取り付け手順は、デル認証のサービス技術者の
みが行う必要があります。
1. 「安全にお使いいただくために 、p. 34」を必ずお読みください。
2. 「システム内部の作業を始める前に 、p. 34」の手順に従ってください。
3. ミッドプレーンアセンブリを取り外します。
手順
1. マイラー製絶縁体を取り外します。
2. 電源バスバーとケーブルカバーをミッドプレーンアセンブリから外します。
3. 電源バスバーとケーブルカバーを電源インターポーザボードから外します。
4. 電源インタポーザボードをキャリアに固定している 4 本のネジを取り外します。
5. 電源インタポーザボードをキャリアから持ち上げます。
図 61. 電源インタポーザボードの取り外しと取り付け
a. ネジ(4)
b. 電源インタポーザボード
PowerEdge FX2/FX2s
エンクロージャコンポーネントの取り付けと取り外し 75