Owners Manual
Table Of Contents
- Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual
- About your Dell PowerEdge FX2/FX2s
- Initial system configuration
- PowerEdge FX2/FX2s mapping configurations
- Installing and removing PowerEdge FX2/FX2s enclosure components
- Customer and field replaceable units—PowerEdge FX2/FX2s
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- System cover
- Sleds
- Inside the system
- CMC module
- I/O module
- PCIe module
- Expansion cards
- Power supply units
- Cooling fans
- Cooling-fan cage
- PCIe switch board
- Fan interface board
- Interposer module
- Midplane assembly
- Control panel
- KVM panel
- Troubleshooting your system
- Technical specifications—PowerEdge FX2/FX2s
- Getting help
I/O module
Your system supports up to two hot-swappable I/O modules that provide external network connectivity.
Removing an I/O module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE: You must remove an I/O module to replace a faulty module or service other components of the system.
NOTE: An I/O module is hot-swappable.
Ensure that you read the Safety instructions on page 33.
Steps
1. Disconnect the cables attached to the I/O module.
2. Press the release latch and slide the I/O module out of the enclosure.
Figure 39. Removing and installing an I/O module
a. I/O module
b. I/O module handle
c. release latch
Next steps
Install the I/O module.
Related tasks
Installing an I/O module on page 44
Installing an I/O module
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
44 Installing and removing PowerEdge FX2/FX2s enclosure components