Owners Manual
Table Of Contents
- About your system
- Performing initial system configuration
- Pre-operating system management applications
- Navigation keys
- About system setup
- Entering System Setup
- System Setup main screen
- System BIOS screen
- System Information screen
- Memory Settings screen
- Processor Settings screen
- SATA Settings screen
- Boot Settings screen
- Integrated Devices screen
- Serial Communications screen
- System Profile Settings screen
- System Security screen
- Miscellaneous Settings screen
- About Boot Manager
- About Dell Lifecycle Controller
- Changing the boot order
- Choosing the system boot mode
- Assigning a system or setup password
- Using your system password to secure your system
- Deleting or changing an existing system and/or setup password
- Operating with a setup password enabled
- Embedded system management
- iDRAC Settings utility
- Processor core licensing
- Networking configurations
- Installing sled components
- Recommended tools
- Removing the sled
- Installing the sled
- Inside the sled
- Cable cover
- Cooling shroud
- System memory
- Hard drives/SSDs
- Hard drive/SSD to node assignment
- Removing a hard drive/SSD
- Installing a hard drive/SSD
- Shutdown procedure for servicing a hard drive/SSD
- Configuring the boot drive
- Removing a 2.5 inch hard drive/SSD from a hard-drive/SSD carrier
- Installing a 2.5 inch hard drive/SSD in a hard-drive/SSD carrier
- Removing a 1.8 inch SSD from the SSD carrier
- Installing a 1.8 inch SSD in the SSD carrier
- Hard-drive/SSD backplane
- SSD cage assembly
- Easy restore module
- System battery
- System board
- Control panel
- Troubleshooting your system
- Using system diagnostics
- Jumpers and connectors
- Technical specifications
- Getting help
Front-panel features and indicators
Figure 1. Front-panel features and indicators — 2.5 inch hard-drive/SSD system
Figure 2. Front-panel features and indicators — 1.8 inch SSD system
Table 2. Front-panel features and indicators
Item Indicator, Button, or
Connector
Icon Description
1 Hard drives/SSDs
2.5 inch
hard-drive/SSD
system
Four 2.5 inch warm-swap SATA
hard drives or SATA SSDs.
1.8 inch SSD
system
Eight 1.8 inch hot-swap SATA
SSDs.
2 Sled power-on indicator,
power button
The power-on indicator lights when the sled power is
on. The power button controls the power supply output
to the system.
3 Node status indicators Provide information about the status of the four nodes
in the sled.
4 USB select button Allows you to assign the USB port to a particular node
in the sled.
4 About your system