Owners Manual
Table Of Contents
- About your system
- Performing initial system configuration
- Pre-operating system management applications
- Navigation keys
- About system setup
- Entering System Setup
- System Setup main screen
- System BIOS screen
- System Information screen
- Memory Settings screen
- Processor Settings screen
- SATA Settings screen
- Boot Settings screen
- Integrated Devices screen
- Serial Communications screen
- System Profile Settings screen
- System Security screen
- Miscellaneous Settings screen
- About Boot Manager
- About Dell Lifecycle Controller
- Changing the boot order
- Choosing the system boot mode
- Assigning a system or setup password
- Using your system password to secure your system
- Deleting or changing an existing system and/or setup password
- Operating with a setup password enabled
- Embedded system management
- iDRAC Settings utility
- Processor core licensing
- Networking configurations
- Installing sled components
- Recommended tools
- Removing the sled
- Installing the sled
- Inside the sled
- Cable cover
- Cooling shroud
- System memory
- Hard drives/SSDs
- Hard drive/SSD to node assignment
- Removing a hard drive/SSD
- Installing a hard drive/SSD
- Shutdown procedure for servicing a hard drive/SSD
- Configuring the boot drive
- Removing a 2.5 inch hard drive/SSD from a hard-drive/SSD carrier
- Installing a 2.5 inch hard drive/SSD in a hard-drive/SSD carrier
- Removing a 1.8 inch SSD from the SSD carrier
- Installing a 1.8 inch SSD in the SSD carrier
- Hard-drive/SSD backplane
- SSD cage assembly
- Easy restore module
- System battery
- System board
- Control panel
- Troubleshooting your system
- Using system diagnostics
- Jumpers and connectors
- Technical specifications
- Getting help
System board connectors
Figure 31. System board connectors
Table 15. System board connectors
Item Connector Description
1 J_PW_NVRAM4 System configuration jumpers for node D
2 C_A1, C_A2 Memory module sockets for node C
3 C CPU and heat sink for Node C
4 BATTERY Connector for the 3.0 V coin cell battery
5 J_FRU Easy Restore Module connector
6 A CPU and heat sink for Node A
7 A_A1, A_A2 Memory module sockets for node A
8 J_PW_NVRAM1 System configuration jumpers for node A
9 J_BLADE Sled connectors to the enclosure midplane
10 B_A1, B_A2 Memory module sockets for node B
11 J_PW_NVRAM3 System configuration jumpers for node B
12 B CPU and heat sink for Node B
13 SATA_A SATA connector
14 SATA_B SATA connector
15 J_PW_NVRAM2 System configuration jumpers for node C
16 D CPU and heat sink for Node D
17 D_A1, D_A2 Memory module sockets for node D
18 J_BP_PWR Hard-drive/SSD backplane power connector
19 J_CP Control panel connector
54 Jumpers and connectors