Dell Chassis Management Controller Version 2.
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS macht darauf aufmerksam, dass bei Nichtbefolgung von Anweisungen eine Beschädigung der Hardware oder ein Verlust von Daten droht, und zeigt auf, wie derartige Probleme vermieden werden können.
Inhaltsverzeichnis 1 Übersicht.......................................................................................................................................................11 Wichtige Funktionen.........................................................................................................................................................12 Was ist neu in dieser Version?...........................................................................................................................
Konfigurieren der Gehäuseverwaltung im Servermodus.............................................................................................37 Konfigurieren der Gehäuseverwaltung auf dem Server unter Verwendung der CMC Web-Schnittstelle......37 Konfigurieren der Gehäuseverwaltung im Servermodus unter Verwendung von RACADM............................ 37 3 Anmelden am CMC......................................................................................................................................
Informationen zur ausgewählten Komponente.......................................................................................................64 Anzeigen des Servermodellnamens und der Service-Tag-Nummer.................................................................... 65 Anzeigen des Speichermodellnamens und der Service-Tag-Nummer.................................................................66 Anzeigen der Gehäusezusammenfassung........................................................................
Gehäusekonfigurationsprofile......................................................................................................................................... 82 Speichern der Gehäusekonfiguration...................................................................................................................... 83 Wiederherstellen eines Gehäusekonfigurationsprofils...........................................................................................
Fertigstellungsstatus und Fehlerbehebung........................................................................................................... 104 Quick Deploy von Profilen....................................................................................................................................... 104 Zuweisen von Serverprofilen zu Steckplätzen .....................................................................................................104 Startidentitätsprofile........................
Unterstützte Active Directory-Authentifizierungsmechanismen........................................................................125 Übersicht des Standardschema-Active Directory................................................................................................ 125 Konfigurieren des Active Directory-Standardschemas........................................................................................ 126 Übersicht über das erweiterte Active Directory-Schema...................................
Über FlexAddress........................................................................................................................................................... 144 Über FlexAddress Plus............................................................................................................................................. 145 Überprüfen der FlexAddress-Aktivierung..............................................................................................................
Netzteilfehler.............................................................................................................................................................164 Standard-Redundanzkonfiguration.............................................................................................................................. 165 Anpassen von Schlitten mit mehreren Knoten...........................................................................................................
1 Übersicht Der Dell Chassis Management Controller (CMC) für Dell EMC PowerEdge FX2/FX2s ist eine Systemverwaltungs-Hardware- und Software-Lösung zur Verwaltung der PowerEdge FX2/FX2s-Gehäuse. Der CMC verfügt über einen eigenen Mikroprozessor und Speicher und wird vom modularen Gehäuse, an das er angeschlossen ist, mit Strom versorgt.
• Unterstützte Plattformen • Unterstützte Web-Browser • Unterstützte Firmware-Versionen • Unterstützte Firmwareversionen für die Serverkomponentenaktualisierung • Unterstützte Netzwerkadapter • Lizenzverwaltung • Anzeigen lokalisierter Versionen der CMC Web-Schnittstelle • Unterstützte Verwaltungskonsolenanwendungen • Verwendung dieses Benutzerhandbuchs • Weitere nützliche Dokumente • Zugriff auf Dokumente von der Dell EMC Support-Website Wichtige Funktionen Die CMC-Funktionen werden i
• Remote-Stromverwaltung – Bietet Remote-Stromverwaltungsfunktionen wie z. B. Ausschalten und Reset einer beliebigen Gehäusekomponente von einer Verwaltungskonsole aus. • Stromverbrauchsberichte. • SSL-Verschlüsselung (Secure Sockets Layer) – Bietet sichere Remote-Systemverwaltung über die Webschnittstelle. • Startpunkt für die Web-Schnittstelle des Integrated Dell Remote Access Controller (iDRAC). • Unterstützung für WS-Management. • Multi-Node-Schlitten-Anpassung.
Abbildung 1. Rückseite des Gehäuses Tabelle 1.
Abbildung 2. Frontblende des Gehäuses Tabelle 2. Frontblende des Gehäuses – Komponenten Element Anzeige, Taste oder Anschluss 1 Systemidentifikationstaste 2 Betriebsanzeige, Netzschalter des Gehäuses 3 Diagnoseanzeigen 4 KVM-Auswahltaste 5 Rechnerschlitten 6 Bildschirmanschluss 7 USB-Anschluss 8 Speicherschlitten Unterstützte Remote-Zugriffsverbindungen Die folgende Tabelle führt die unterstützten Remote-Zugriffsverbindungen auf. Tabelle 3.
Verbindung Funktionen • • • • Serielle Schnittstelle • • • VORSICHT: Das Verbinden der STK/Gb2-Schnittstelle mit dem Verwaltungsnetzwerk kann zu unvorhersehbaren Ergebnissen führen, wenn die CMC-Einstellung von der standardmäßigen Einstellung Stacking auf Redundant geändert wurde, um NIC-Failover zu implementieren. Im Standardmodus Stacking kann die Verkabelung der Gb1- und STK/Gb2-Ports mit demselben Netzwerk (Broadcast-Domäne) zu einer BroadcastÜberlastung führen.
Unterstützte Firmware-Versionen Die folgende Tabelle führt die Firmware-Versionen für BIOS, iDRAC und Lifecycle Controller auf, die Unterstützung für die aufgeführten Server bieten: Tabelle 4. Aktuellste Firmwareversionen für BIOS, iDRAC und Lifecycle Controller Server BIOS iDRAC Lifecycle-Controller PowerEdge FC830 2.7.1 2.52.52.52 2.52.52.52 PowerEdge FC630 2.7.1 2.52.52.52 2.52.52.52 PowerEdge FC430 2.7.1 2.52.52.52 2.52.52.52 PowerEdge FM120 1.70 2.52.52.52 2.52.52.
Plattform FC640 Serverkomponente Vorhergehende Komponentenversion (N-1-Version) Aktualisierte Komponentenversion (N-Version) Lifecycle-Controller 2.52.52.52 2.60.60.60 Diagnose 4231A0 4247A1 BIOS 1.6.0 1.7.0 iDRAC 3.15.15.15 3.21.21.21 Lifecycle-Controller 3.15.15.15 3.21.21.21 Diagnose 4301A13 4301A13 BIOS 1.3.7 1.4.8 Unterstützte Netzwerkadapter Die folgende Tabelle führt die unterstützten Netzwerkadapter für PowerEdge FX2/FX2s auf. Tabelle 6.
Plattformen Modell FC430 FC630 FC830 FC640 OCe 14102–U1–D 10GbE CNA Ja Ja Ja Ja X540 DP 10G BASE-T Ja Ja Ja Ja i350 DP 1G Ja Ja Ja Ja i350 QP 1G Ja Ja Ja Ja X520 DP 10G SFP+ Nein Ja Nein Ja X710 DP 10GBE SFP+ (Fortville) Ja Ja Ja Ja CX3 DP 40GbE QSFP+ Ja Ja Ja Ja CX3 DP 10GbE DA/SFP+ Ja Ja Ja Ja CX3 MCX354–A-FCBT Nein Nein Nein Nein QLE2560 FC8 Single HBA Nein Ja Ja Ja 578 10S 10G BASE-T Ja Ja Ja Ja QLE2660 SP FC 16 HBA Nein Ja Ja Ja QLE2662 D
Speicherschlittenlizenzen können für einen oder zwei RAID-Controller verwendet werden. Wird eine Lizenz für RAID auf einem einzelnen Controller zugewiesen, dann gilt die Lizenz nur für den ersten Controller. Das Löschen einer Speicherschlittenlizenz kann zum Verlust von RAID-Daten führen. Speicherschlittenlizenzen beziehen sich auf einen bestimmten Speicherschlitten und sind an dessen Service-Tag-Nummer gebunden.
importieren. Die importierte Lizenz wird im CMC-Lizenzmanager und im dauerhaften Speicher des Speicherschlittens abgelegt. Die lizenzierten Funktionen stehen erst zur Verfügung, wenn der RAID-Controller beim nächsten Neustart des Host-Servers zurückgesetzt wurde. Sie können Lizenzen für Speicherschlitten nur in das Zielgerät importieren.
Funktion Express Enterprise CMC-Einstellungen, Backup Nein Ja CMC-Einstellungen, Wiederherstellung Ja Ja Remote-Syslog Nein Ja Verzeichnisdienste Nein Ja Support für Single Sign-On Nein Ja Zweifaktor-Authentifizierung Nein Ja PK-Authentifizierung Nein Ja Remote-Dateifreigabe Nein Ja Gehäuseebenen-Stromobergrenzen Nein Ja Verwaltung von mehreren Gehäusen Nein Ja FlexAddress-Aktivierung Nein Ja Eins-zu-viele-Server-FirmwareAktualisierungen Nein Ja Eins-zu-viele-Konfigura
Anzeigen lokalisierter Versionen der CMC WebSchnittstelle Um lokalisierte Versionen der CMC Web-Schnittstelle anzuzeigen, lesen Sie die Dokumentation zu Ihrem Web-Browser. Zur Anzeige der lokalisierten Versionen stellen Sie den Browser auf die gewünschte Sprache ein. Unterstützte Verwaltungskonsolenanwendungen Der CMC unterstützt die Integration mit Dell OpenManage-Konsole. Weitere Informationen finden Sie in der Dokumentation der OpenManage-Konsole unter dell.com/support/manuals.
• Das Owner's Manual (Benutzerhandbuch) des Servermoduls gibt Informationen über die Funktionen des Servermoduls an, beschreibt den Fehlerbehebungsvorgang für das Servermodul und das Installieren oder Austauschen der Komponenten des Servermoduls. Dieses Dokument steht online unter dell.com/poweredgemanuals zur Verfügung. • In der zusammen mit der Rack-Lösung gelieferten Rack-Dokumentation ist beschrieben, wie das System in einem Rack installiert wird.
2 Installieren und Einrichten von CMC Dieser Abschnitt enthält Informationen darüber, wie die CMC-Hardware installiert, der Zugriff auf den CMC eingerichtet und die Verwaltungsumgebung zur Verwendung des CMC konfiguriert wird und führt Sie durch die Tasks zum Konfigurieren eines CMC: • Anfänglichen Zugriff auf den CMC einrichten. • Über ein Netzwerk auf den CMC zugreifen. • CMC-Benutzer hinzufügen und konfigurieren.
VORSICHT: Das Verbinden der STK/Gb2-Schnittstelle mit dem Verwaltungsnetzwerk kann zu unvorhersehbaren Ergebnissen führen, wenn die CMC-Einstellung von der standardmäßigen Einstellung Stacking auf Redundant geändert wurde, um NIC-Failover zu implementieren. Im Standardmodus Stacking kann die Verkabelung der Gb1- und STK/Gb2Ports mit demselben Netzwerk (Broadcast-Domäne) zu einer Broadcast-Überlastung führen.
Overview (Server-Übersicht) > Setup > iDRAC. Sie können die statische IP-Adresse auch mit einer Express-Lizenz ermitteln. Gehen Sie zu Server Overview (Server-Übersicht) > Server-Slot > Setup > iDRAC. 10 Stellen Sie dem E/A-Modul eine externe Verwaltungs-IP-Adresse in der CMC-Webschnittstelle bereit (falls erforderlich). Sie erhalten die IP-Adresse, indem Sie auf I/O Module Overview (E/A-Modulübersicht) und dann auf Setup klicken.
Tabelle 9. Verkettete Speicherschlitten 1 Verwaltungsnetzwerk 2 Aktiver CMC Die folgende Abbildung zeigt ein Beispiel für eine nicht korrekte Verkabelung eines CMC im Stacking-Modus.
Im Folgenden werden die Schritte zur Verkettung von vier FX2-CMC-Modulen beschrieben: 1 Verbinden Sie die GB-Schnittstelle des FX2-CMC im ersten Gehäuse mit dem Verwaltungsnetzwerk. 2 Verbinden Sie die GB-Schnittstelle des FX2-CMC im zweiten Gehäuse mit der STK-Schnittstelle des FX2-CMC im ersten Gehäuse. 3 Wenn ein drittes Gehäuse vorhanden ist, verbinden Sie dessen GB-Schnittstelle vom FX2-CMC mit der STK-Schnittstelle des FX2CMC im zweiten Gehäuse.
Schnittstelle/ Protokoll Beschreibung Management Station an. Weitere Informationen über das Anschließen der Kabel finden Sie im Abschnitt über die Rückseite des Gehäuses unter Gehäuseübersicht.
Schnittstelle/ Protokoll Beschreibung Die CMC-WSMAN-Implementierung verwendet SSL auf Schnittstelle 443 für Transportsicherheit und unterstützt Standardauthentifizierung. Die durch WS-Management zur Verfügung gestellten Daten werden durch die CMCInstrumentierungsschnittstelle bereitgestellt, die den DMTF-Profilen und den Erweiterungsprofilen zugeordnet ist. ANMERKUNG: Die SSL-Schnittstelle für Transportsicherheit ist die gleiche wie die CMC-HTTPSSchnittstelle.
Installieren von Remote-RACADM auf einer WindowsManagement-Station Wenn Sie die DVD verwenden, führen Sie die folgende Datei aus: \SYSMGMT\ManagementStation\windows\DRAC\<.MSI- Dateiname> Wenn Sie die Software von dell.com/supportheruntergeladen haben: 1 Entpacken Sie die heruntergeladene Datei, und führen Sie die bereitgestellte .msi-Datei aus. Je nach heruntergeladener Version lautet der Dateiname DRAC.msi, RACTools.msi oder RACTools64Bit.msi.
3 Überprüfen Sie die zu deinstallierende Paketversion und deinstallieren Sie die Funktion unter Verwendung des Befehls -e rpm -qa | grep mgmtst-racadm. Konfigurieren eines Webbrowsers Sie können den CMC und die im Gehäuse installierten Server und Module über einen Webbrowser konfigurieren und verwalten. Lesen Sie den Abschnitt „Unterstützte Webbrowser“ in der Dell Systems Software Support Matrix unter dell.com/support/manuals.
Aktivieren von Animationen in Internet Explorer Wenn Sie Dateien über die Webschnittstelle herunter- oder hochladen, dreht sich ein Dateiübertragungssymbol und zeigt damit an, dass eine Übertragungsaktivität stattfindet. Wenn Sie Internet Explorer verwenden, muss der Browser so konfiguriert sein, dass Animationen wiedergegeben werden können. So konfigurieren Sie Internet Explorer zum Abspielen von Animationen: 1 Starten Sie den Internet Explorer.
Einstellen von Datum und Uhrzeit auf dem CMC Stellen Sie Datum und Uhrzeit manuell ein oder synchronisieren Sie Datum und Uhrzeit mit einem Network Time Protocol (NTP)-Server. Einstellen von Datum und Uhrzeit auf dem CMC unter Verwendung der CMC Web-Schnittstelle So stellen Sie das Datum und die Uhrzeit auf dem CMC ein: 1 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Setup > Datum/Uhrzeit.
Konfigurieren der LED-Blinkfunktion unter Verwendung der CMC WebSchnittstelle Blinken von LEDs für eine, mehrere oder alle Komponenten aktivieren: • Gehen Sie im linken Fensterbereich zu einer der folgenden Seiten: – Gehäuseübersicht > Fehlerbehebung. – Gehäuseübersicht > Gehäuse-Controller > Fehlerbehebung . – Gehäuse-Übersicht > Server-Übersicht > Fehlerbehebung . ANMERKUNG: Auf dieser Seite können nur Server ausgewählt werden.
Der Gehäusenetzschalter ist deaktiviert. Zugreifen auf einen Server unter Verwendung von KVM So ordnen Sie Server und KVM über die Web-Schnittstelle einander zu: 1 Schließen Sie einen Monitor an den Videoanschluss und eine Tastatur an einen USB-Anschluss auf der Vorderseite des Gehäuses an. 2 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Frontblende > Setup. 3 Wählen Sie auf der Seite Frontblendenkonfiguration im Abschnitt KVM-Konfiguration die Option KVM-Zuordnung aktivieren aus.
• Ändern der Gehäuseverwaltung im Servermodus in „Überwachen“: racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 1 • Ändern der Gehäuseverwaltung im Servermodus in „Verwalten und überwachen“: racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 2 38 Installieren und Einrichten von CMC
3 Anmelden am CMC Sie können sich beim CMC als lokaler CMC-Benutzer, als Microsoft Active Directory-Benutzer oder als LDAP-Benutzer anmelden. Sie können sich auch unter Verwendung von Single Sign-On oder einer Smart Card anmelden.
Weitere Informationen zu sshpkauth finden Sie im Chassis Management Controller for PowerEdge FX2/FX2s Command Line Reference Guide (Befehlszeilen-Referenzhandbuch für Chassis Management Controller für PowerEdge FX2/FX2s). Generieren öffentlicher Schlüssel für Systeme, die Windows ausführen Vor dem Hinzufügen eines Kontos ist ein öffentlicher Schlüssel von dem System erforderlich, das über SSH auf den CMC zugreift.
Aufrufen der CMC Web-Schnittstelle Stellen Sie vor der Anmeldung bei CMC über die Webschnittstelle sicher, dass Sie einen unterstützten Webbrowser konfiguriert haben, und dass das Benutzerkonto mit den erforderlichen Berechtigungen erstellt wurde. ANMERKUNG: Wenn Sie Microsoft Internet Explorer verwenden, die Verbindung über einen Proxy herstellen und der Fehler The XML page cannot be displayed angezeigt wird, müssen Sie den Proxy deaktivieren, um fortzufahren.
• LDAP-Benutzername: ANMERKUNG: Dieses Feld unterscheidet Groß- und Kleinschreibung. 2 Geben Sie im Feld Kennwort das Benutzerkennwort ein. ANMERKUNG: Für Active Directory-Benutzer ist das Feld Benutzername abhängig von Groß-/Kleinschreibung. 3 Wählen Sie im Feld Domäne aus dem Drop-Down-Menü die erforderliche Domäne aus. 4 Optional können Sie eine Sitzungszeitüberschreitung wählen.
Anmelden beim CMC unter Verwendung von Single sign-on Wenn die einfache Anmeldung (SSO) aktiviert ist, können Sie sich ohne die Eingabe Ihrer Anmeldeinformationen für die DomänenBenutzerauthentifizierung (also Benutzername und Kennwort) bei CMC anmelden. Um diese Funktion zu nutzen, benötigen Sie eine Enterprise-Lizenz. ANMERKUNG: Sie können bei SSO nicht die IP-Adresse verwenden. Kerberos überprüft Ihre Anmeldeinformationen gegenüber dem vollständig qualifizierten Domänennamen (FQDN).
Beispiel: • Anmelden: ssh service@ oder ssh service@ , wobei IP_address die CMC IP-Adresse ist. • Senden von RACADM-Befehlen: ssh service@ racadm getversion und ssh service@ racadm getsel Wenn Sie sich mit den Dienstkonto anmelden und beim Erstellen des öffentlichen/privaten Schlüsselpaars ein Kennsatz (Passphrase) eingerichtet wurde, werden Sie u. U. aufgefordert, diesen Kennsatz erneut einzugeben.
4 Aktualisieren der Firmware Sie können die Firmware für Folgendes aktualisieren: • Der CMC • Gehäuseinfrastruktur • E/A-Modul Sie können die Firmware für folgende Serverkomponenten aktualisieren: • BIOS • iDRAC7 • iDRAC8 • Lifecycle-Controller • 32–Bit-Diagnose • Treiberpaket des Betriebssystems • Netzwerkschnittstellen-Controller • RAID-Controller Themen: • Signiertes CMC-Firmware-Image • Herunterladen der CMC-Firmware • Anzeigen der derzeit installierten Firmware-Version • Ak
• • CMC-Firmware Gehäuseinfrastruktur-Firmware Anzeigen der derzeit installierten Firmware-Version Sie können die aktuellen Firmware-Versionen über die CMC-Webschnittstelle oder über RACADM anzeigen.
der Seite Sessions (Sitzungen) im linken Fensterbereich auf Chassis Overview (Gehäuseübersicht), klicken Sie auf Network (Netzwerk) und dann auf Sessions (Sitzungen). Während der abschließenden Phase der Firmware-Aktualisierung in CMC die werden die Browsersitzung und die Verbindung zum CMC vorübergehend unterbrochen, da der CMC nicht mit dem Netzwerk verbunden ist. Der CMC meldet den Gesamtfunktionszustand des Gehäuses aufgrund der temporär unterbrochenen Netzwerkverbindung als kritisch.
ANMERKUNG: Der Aktualisierungsvorgang kann einige Minuten dauern. Aktualisieren der CMC-Firmware unter Verwendung von RACADM Verwenden Sie zum Aktualisieren der CMC-Firmware mit RACADM den Unterbefehl fwupdate. Beispiel: racadm fwupdate . Weitere Informationen über RACADM-Befehle finden Sie im Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide (RACADM-Befehlszeilen-Referenzhandbuch für Chassis Management Controller für PowerEdge FX2/ FX2s).
• 2 Gehäuseübersicht > Aktualisieren • Gehäuseübersicht > Gehäuse-Controller > Aktualisieren Wählen Sie auf der Seite Firmware-Aktualisierung im Abschnitt Gehäuseinfrastruktur-Firmware in der Spalte Ziele aktualisieren die Option und klicken Sie dann auf Gehäuseinfrastruktur-Firmware anwenden . 3 Klicken Sie auf der Seite Firmware-Aktualisierung auf Durchsuchen und wählen Sie dann die entsprechende GehäuseinfrastrukturFirmware.
• Gehäuseübersicht > Aktualisieren • Gehäuseübersicht > Gehäuse-Controller > Aktualisieren Die Seite Firmware-Aktualisierung wird angezeigt. ANMERKUNG: Sie können auch Server-iDRAC-Firmware unter Gehäuseübersicht > Server-Übersicht > Aktualisierung aktualisieren. Weitere Informationen finden Sie unter Aktualisieren der Serverkomponenten-Firmware.
ANMERKUNG: Beachten Sie Folgendes: • Stellen Sie während der Auswahl der einzelnen zu aktualisierenden Serverkomponenten sicher, dass keine Abhängigkeiten zwischen den ausgewählten Komponenten bestehen. Andernfalls kann die Auswahl bestimmter Komponenten, bei denen Abhängigkeiten zu anderen Komponenten bestehen, dazu führen, dass der Server unerwartet ausfällt. • Stellen Sie sicher, dass die empfohlene Reihenfolge für die Aktualisierung der Serverkomponenten eingehalten wird.
Wenn der Server den Lifecycle Controller-Dienst nicht unterstützt, zeigt der Abschnitt Component/Device Firmware Inventory (Komponenten-/Firmware-Bestandsaufnahme) Not supported (Nicht unterstützt) an. Für die neueste Generation von Servern können Sie die Lifecycle Controller-Firmware installieren und die iDRAC-Firmware aktualisieren, um den Lifecycle Controller-Dienst auf dem Server zu aktivieren. Bei Servern älterer Generationen ist dieses Upgrade unter Umständen nicht möglich.
Im Fall von unzureichenden Berechtigungen können Sie nur die Firmware-Bestandsliste von Komponenten und Geräten auf dem Server anzeigen lassen. Sie können keine Komponenten oder Geräte für irgendeinen Typ von Lifecycle Controller-Vorgang auf dem Server auswählen.
Anzeigen der Firmware-Bestandsaufnahme Sie können die Zusammenfassung der Firmware-Versionen für alle Komponenten und Geräte für alle aktuell im Gehäuse vorhandenen Server und deren Status anzeigen. ANMERKUNG: Um diese Funktion verwenden zu können, benötigen Sie eine Enterprise-Lizenz.
Feld Beschreibung Das Nummerierungsschema hilft Ihnen bei der Identifizierung der Position des Servers im Gehäuse. Wenn weniger als vier Steckplätze mit Servern belegt sind, werden nur die mit Servern bestückten Steckplätze angezeigt. Name Zeigt den Namen des Servers in den einzelnen Steckplätzen an. Modell Zeigt das Modell des Servers an. Komponente/Gerät Zeigt eine Beschreibung der Komponente oder des Geräts auf dem Server an.
Konfigurieren der Netzwerkfreigabe unter Verwendung der CMC Web-Schnittstelle So konfigurieren oder bearbeiten Sie den Standort oder die Anmeldeinformationen der Netzwerkfreigabe: 1 Gehen Sie in der CMC Web-Schnittstelle, in der Systemstruktur, zu Serverübersicht, und klicken Sie anschließend auf Netzwerkfreigabe. Die Seite Netzwerkfreigabe bearbeiten wird angezeigt.
Es kann immer nur ein Vorgangstyp durchgeführt werden. Nicht unterstützte Komponenten und Server werden möglicherweise als Teil der Bestandsliste aufgeführt, Lifecycle Controller-Vorgänge sind jedoch zulässig. Zum Durchführen der verschiedenen Lifecycle Controller-Vorgänge brauchen Sie: • Für CMC: Server Administrator-Berechtigung. • Für iDRAC: iDRAC-Konfigurationsberechtigung und iDRAC-Anmeldeberechtigung.
Zurücksetzen der Serverkomponenten-Firmware unter Verwendung der CMC WebSchnittstelle So setzen Sie die Serverkomponenten-Firmware auf eine vorherige Version zurück: 1 Klicken Sie im linken Fensterbereich auf Server-Übersicht→ Aktualisieren. 2 Klicken Sie auf der Seite Serverkomponentenaktualisierung auf den entsprechenden Typ im Abschnitt Aktualisierungstyp auswählen.
Die Seite Serverkomponentenaktualisierung wird angezeigt. 2 Wählen Sie im Abschnitt Aktualisierungstyp auswählen die Option Aktualisierung über Datei. Weitere Informationen finden Sie unter Auswählen des Aktualisierungstyps der Serverkomponenten-Firmware 3 Filtern Sie im Abschnitt Komponenten-/Geräte-Aktualisierungsfilter die Komponente oder das Gerät (optional). Weitere Informationen finden Sie unter Filtern von Komponenten für Firmware-Aktualisierungen.
Voraussetzungen für die Verwendung des NetzwerkfreigabeAktualisierungsmodus Folgende Voraussetzungen sind erforderlich, um die Firmware der Serverkomponenten unter Verwendung des Netzwerkfreigabemodus zu aktualisieren: • Die Server müssen über eine iDRAC Enterprise-Lizenz verfügen. • Lifecycle Controller muss auf den Servern aktiviert sein. • Dell Repository Manager 1.8 oder höher muss im System installiert sein. • Sie müssen über CMC-Administratorrechte verfügen.
Eine Meldung erscheint, deren Inhalt von der Art der enthaltenen Aktualisierungen abhängt, und in der Sie aufgefordert werden, zu bestätigen, wenn Sie fortfahren möchten. 9 Klicken Sie auf OK, um fortzufahren und die Planung der Firmwareaktualisierung für die ausgewählten Server abzuschließen. ANMERKUNG: Die Auftragsstatus-Spalte zeigt den Auftragsstatus der geplanten Vorgänge auf dem Server an. Der Auftragsstatus wird dynamisch aktualisiert.
5 Anzeigen von Gehäuseinformationen und Überwachen des Gehäuse- und KomponentenFunktionszustands Sie können Informationen anzeigen und den Funktionszustand für Folgendes überwachen: • CMC • Alle Server und einzelne Server • E/A-Module • Lüfter • Netzteile • Temperatursensoren • PCIe-Geräte • Speichereinschübe Themen: • Anzeigen von Gehäuse- und Komponenten-Zusammenfassungen • Anzeigen der Gehäusezusammenfassung • Anzeigen von Gehäuse-Controller-Informationen und Status • Anzeigen von
Wenn Ihr Gehäuse als Gruppenführung konfiguriert wurde, wird nach der Anmeldung die Seite Gruppenfunktionszustand angezeigt. Sie zeigt die Informationen und Warnungen auf Gehäuseebene an. Es werden alle aktiven kritischen und nicht-kritischen Warnungen angezeigt. Gehäuse-Grafiken Das Gehäuse wird in Vorder- und Rückansichten sowie in der Draufsicht dargestellt (jeweils die oberen und unteren Bilder).
Informationen zur ausgewählten Komponente Die Informationen für die ausgewählte Komponente werden in drei getrennten Bereichen angezeigt: • Funktionszustand, Leistung und Eigenschaften – Zeigt die aktiven, kritischen und nicht-kritischen Ereignisse gemäß der Anzeige im Hardwareprotokoll und die mit der Zeit variierenden Leistungsdaten an. • Eigenschaften – Zeigt die Komponenteneigenschaften an, die sich nicht mit der Zeit ändern oder sich nur selten ändern.
Komponente Funktionszustand, Leistung und Eigenschaften Eigenschaften Quicklinks – Verbunden mit Server – Controller-ModusFähigkeit • Netzteileinheiten PCIe-Geräte Lüfter EAM-Steckplatz Stromstatus Eingriffstatus Kapazität • Netzteilstatus • Stromverbrauch • Systembudget • Installiert • Modell • PCIe-Status • Zugewiesen • Zuweisung • PCIe Einrichtung • Hersteller-ID • Geräte-ID • Steckplatztyp • Modultyp • Struktur • Stromstatus • Geschwindigkeit • Warnungsschwell
Anzeigen des Speichermodellnamens und der Service-TagNummer Sie können den Modellnamen und die Service-Tag-Nummer der einzelnen Speicherschlitten durch Ausführung der folgenden Schritte anzeigen: 1 Im linken Fenster werden unter dem Strukturknoten Serverübersicht alle Speicherschlitten in einer Liste angezeigt. Wenn ein Speicherschlitten nicht in einem bestimmten Steckplatz vorhanden ist, ist das entsprechende Bild in der Grafik grau unterlegt.
Auf der Seite Speicher-Array-Status werden die Eigenschaften des Speicherschlittens und die Liste der Speicherknoten angezeigt, die mit dem Rechnerschlitten verbunden sind. Weitere Informationen finden Sie in der Online-Hilfe. Anzeigen von Informationen und des Funktionszustands von EAMs Um den Funktionszustand der EAMs über die CMC-Webschnittstelle anzuzeigen, führen Sie einen der folgenden Schritte aus: 1 Klicken Sie auf Gehäuseübersicht. Die Seite Gehäusefunktionszustand wird angezeigt.
angegeben. Positionieren Sie den Cursor auf die Lüfter-Untergrafik. Der Texthinweis liefert zusätzliche Informationen zum Lüfter. Klicken Sie auf die Lüfter-Untergrafik, um die Lüfter-Informationen im rechten Fensterbereich anzuzeigen. 2 Gehen Sie zu Gehäuseübersicht Lüfter. Die Seite Lüfterstatus zeigt die Messwerte für den Status, die Geschwindigkeit (in Umdrehungen pro Minute oder U/Min.) und die Schwellenwerte der Lüfter im Gehäuse an. Es können ein oder mehrere Lüfter vorhanden sein.
Anzeigen von Informationen und Funktionszustand von KVM Um den Funktionszustand der mit dem Gehäuse verbundenen KVMs anzuzeigen, führen Sie eine der folgenden Optionen aus: Klicken Sie auf Gehäuseübersicht > Frontblende. Sie könne auf der Seite Status, im Abschnitt KVM-Eigenschaften, den Status und die Eigenschaften eines KVM, das dem Gehäuse zugeordnet ist, anzeigen. Weitere Informationen finden Sie in der Online-Hilfe.
6 Den CMC konfigurieren Mit Chassis Management Controller können Sie Eigenschaften konfigurieren, Benutzer einrichten und Warnungen für die Ausführung von Remote-Verwaltungstasks einrichten. Bevor Sie mit der Konfiguration des CMC beginnen, müssen Sie zuerst die CMC-Netzwerkeinstellungen konfigurieren, sodass Sie den CMC im Remote-Zugriff verwalten können. Diese ursprüngliche Konfiguration weist die TCP/IP-Netzwerkbetriebsparameter zu, die den Zugriff auf den CMC aktivieren.
• • • • • Konfigurieren der erweiterten Speicherkarte von CMC Einrichten einer Gehäusegruppe Gehäusekonfigurationsprofile Konfigurieren mehrerer CMCs über RACADM unter Verwendung von Gehäusekonfigurationsprofilen Konfigurieren von mehreren CMCs unter Verwendung von RACADM Aktivieren und Deaktivieren von DHCP für die CMCNetzwerkschnittstellenadresse Wenn aktiviert, wird über die CMC-Funktion „DHCP für NIC-Adresse“ automatisch eine IP-Adresse vom DHCP-Server (Dynamisches HostKonfigurationsprotokoll) angefor
IPv6-Router-Anfragen ausgesendet werden. In diesen Fällen kann die IPv6-Konnektivität zeitweise eingeschränkt sein, bis die RouterAnkündigungen unverlangt von den IPv6-Routern ausgesendet sind. ANMERKUNG: Durch Ändern der CMC-Netzwerkeinstellungen wird möglicherweise die aktuelle Netzwerkverbindung getrennt. ANMERKUNG: Um CMC-Netzwerkeinstellungen einzurichten, müssen Sie die Berechtigung als GehäusekonfigurationAdministrator besitzen.
Um die CMC-IPv4-Adressierung zu aktivieren oder zu deaktivieren, geben Sie Folgendes ein: racadm config -g cfgLanNetworking -o cfgNicIPv4Enable 1 racadm config -g cfgLanNetworking -o cfgNicIPv4Enable 0 ANMERKUNG: Die CMC-IPv4-Adressierung ist standardmäßig aktiviert.
• DNS Domain Name (DNS-Domänenname) – Der Standard-DNS-Domänenname ist ein einziges Leerzeichen. Um einen DNSDomänenname festzulegen, geben Sie Folgendes ein: racadm config -g cfgLanNetworking -o cfgDNSDomainName wobei < name > eine Zeichenkette von bis zu 254 alphanumerischen Zeichen und Bindestrichen ist. Beispiel: p45, a-tz-1, r-id-001.
Konfigurieren von Verwaltungsschnittstelle 2 unter Verwendung der CMC Web-Schnittstelle So konfigurieren Sie die Verwaltungsschnittstelle unter Verwendung der CMC-Web-Schnittstelle: 1 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Netzwerk und dann auf das Register Netzwerk. 2 Wählen Sie auf der Seite Netzwerkkonfiguration im Abschnitt Allgemeine Einstellungen neben Verwaltungsschnittstelle 2 entweder Redundant oder Stacking aus. 3 Klicken Sie auf Änderungen anwenden.
• RACADM • WSMan • SSH v2 • SMTP • Kerberos • NTP-Client • NFS ANMERKUNG: SNMP ist nicht FIPS-konform. Im FIPS-Modus funktionieren alle SNMP-Funktionen, mit Ausnahme der Authentifizierung nach Message-Digest Algorithm, Version 5 (MD5). Aktivieren des FIPS-Modus unter Verwendung der CMC WebSchnittstelle So aktivieren Sie FIPS: 1 Klicken Sie im linken Fenster auf Gehäuseübersicht. Die Seite Gehäusefunktionszustand wird angezeigt. 2 Klicken Sie in der Menüleiste auf Netzwerk.
• Remote-Syslog – Aktivieren Sie CMC, um Ereignisse auf einem Remote-Server zu protokollieren. Um diese Funktion zu nutzen, benötigen Sie eine Enterprise-Lizenz. ANMERKUNG: Vermeiden Sie beim Ändern von CMC-Service-Schnittstellennummern für SSH, Telnet, HTTP oder HTTPS die Verwendung von Schnittstellen, die häufig von Betriebssystemdiensten verwendet werden, wie z. B. Schnittstelle 111.
# # # # # # # # cfgSsnMgtWebServerActiveSessions=N/A cfgSsnMgtWebServerTimeout=N/A cfgSsnMgtSSHMaxSessions=N/A cfgSsnMgtSSHActiveSessions=N/A cfgSsnMgtSSHTimeout=N/A cfgSsnMgtTelnetMaxSessions=N/A cfgSsnMgtTelnetActiveSessions=N/A cfgSsnMgtTelnetTimeout=N/A Konfigurieren der erweiterten Speicherkarte von CMC Sie können die optionalen wechselbaren Flash-Datenträger für die Verwendung als erweiterten nicht-flüchtigen Speicher aktivieren oder reparieren.
Die Gehäusegruppe wechselt beim Erstellen der Gehäusegruppe automatisch zur Gehäusegruppen-Seite. Der linke Fensterbereich zeigt die Gruppe über den Gruppennamen an und das Führungsgehäuse sowie die nicht bestückten Mitgliedergehäuse werden im linken Fensterbereich angezeigt. ANMERKUNG: Wenn die Gehäusegruppe erstellt wurde, wird das Element Gehäuse-Übersicht in der Baumstruktur durch den Namen des Führungsgehäuses ersetzt.
Auflösen einer Gehäusgruppe So lösen Sie eine Gehäusegruppe vom Führungsgehäuse aus auf: 1 Melden Sie sich mit Administratorrechten am Führungsgehäuse an. 2 Wählen Sie im linken Fensterbereich das Führungsgehäuse aus. 3 Klicken Sie auf Setup > Gruppenverwaltung. 4 Wählen Sie auf der Seite Gehäusegruppen unter Rolle, Keine aus und klicken Sie anschließend auf Anwenden. Das Führungsgehäuse benachrichtigt anschließend alle Mitglieder, dass sie aus der Gruppe entfernt wurden.
ANMERKUNG: In MCM werden alle Quick Links im Zusammenhang mit den Servern nicht angezeigt. Propagieren der Führungsgehäuseeigenschaften auf ein Mitgliedsgehäuse Sie können die Eigenschaften eines Führungsgehäuses auf ein Mitgliedsgehäuse einer Gruppe anwenden. Um ein Mitglied mit den Führungseigenschaften zu synchronisieren: 1 Melden Sie sich mit Administratorrechten am Führungsgehäuse an. 2 Wählen Sie in der Struktur das Führungsgehäuse aus. 3 Klicken Sie auf Setup > Gruppenverwaltung.
Tabelle 14. Konfigurationsdiensteigenschaften Eigenschaft Navigation SNMP-Konfiguration Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Netzwerk > Dienste > SNMP. Remote-Gehäuseprotokollierung Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Netzwerk > Dienste > RemoteSyslog. Benutzerauthentifizierung mithilfe der Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Benutzerauthentifizierung > Dienste „LDAP“ und „Active Verzeichnisdienst.
• Exportieren von Gehäuseprofilen (XML-Dateien) von der Netzwerkfreigabe in eine lokale Management Station • Bearbeiten, Löschen, Exportieren oder Anwendung einer Kopie der auf der Netzwerkfreigabe gespeicherten Profile. Speichern der Gehäusekonfiguration Sie können die derzeitige Gehäusekonfiguration in einer XML-Datei auf einer Netzwerkfreigabe oder auf der lokalen Management Station speichern.
ANMERKUNG: Wenn die Backup-Dateien (.bak) von früheren Versionen des CMC auf die neueste Version des CMC hochgeladen werden, auf dem FIPS aktiviert ist, müssen Sie alle 16 lokalen CMC-Benutzerkennwörter neu konfigurieren. Das Kennwort des ersten Benutzers wird hingegen auf „calvin“ zurückgesetzt. ANMERKUNG: Wenn ein Gehäusekonfigurationsprofil von einem CMC, der die FIPS-Funktion nicht unterstützt, auf einen CMC mit aktiviertem FIPS importiert wird, bleibt FIPS im CMC aktiviert.
So exportieren Sie ein gespeichertes Profil: 1 Rufen Sie die Seite Gehäusekonfigurationsprofile auf. Wählen Sie im Abschnitt Gehäusekonfigurationsprofile > Gespeicherte Profile das gewünschte Profil aus, und klicken Sie auf Kopie des Profils exportieren. 2 Klicken Sie auf Speichern oder Öffnen, um das Profil auf den erforderlichen Standort zu exportieren. Eine Meldung zum Datei-Download wird angezeigt und Sie werden dazu aufgefordert, die Datei zu öffnen oder zu speichern.
Exportieren von Gehäusekonfigurationsprofilen Sie können Gehäusekonfigurationsprofile mithilfe des Befehls get auf die Netzwerkfreigabe exportieren. 1 Geben Sie Folgendes ein, um die Gehäusekonfigurationsprofile als clone.xml-Datei unter Verwendung des Befehls get auf eine CIFSNetzwerkfreigabe zu exportieren: racadm get –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC 2 Geben Sie Folgendes ein, um die Gehäusekonfigurationsprofile als clone.
• Systemkonfiguration – Dies ist der übergeordnete Knoten. • Komponente – Dies ist der primäre untergeordnete Knoten. • Attributes (Attribute) – Enthält Name und Wert. Sie können diese Felder bearbeiten. Beispielsweise können Sie den Wert Asset Tag wie folgt bearbeiten: PAGE 88• Alle Konfigurationseigenschaften für einen Benutzer nach Benutzernamen anzeigen. Der Unterbefehl config lädt die Informationen auf andere CMCs. Der Server Administrator verwendet den Befehl config zur Synchronisierung der Benutzer- und Kennwort-Datenbank. Parsing-Regeln • Zeilen, die mit dem Raute-Zeichen (#) beginnen, werden als Anmerkungen behandelt. Eine Anmerkungszeile muss in der ersten Spalte beginnen. Ein „#“-Zeichen in einer anderen Spalte wird als „#“-Zeichen behandelt.
• Für indizierte Gruppen muss es sich bei dem Objektanker um das erste Objekt nach dem [ ]-Paar handeln. Im Folgenden finden Sie Beispiele für aktuelle indizierte Gruppen: [cfgUserAdmin] cfgUserAdminUserName= • Wenn bei Verwendung von Remote-RACADM zur Erfassung der Konfigurationsgruppen in einer Datei eine Schlüsseleigenschaft innerhalb einer Gruppe nicht festgelegt ist, wird die Konfigurationsgruppe nicht als Teil der Konfigurationsdatei gespeichert.
7 Konfigurieren von Servern Sie können die folgenden Einstellungen eines Servers konfigurieren: • Steckplatznamen • iDRAC-Netzwerkeinstellungen • DRAC VLAN-Tag-Einstellungen • Erstes Startgerät • Server-FlexAddress • Remote-Dateifreigabe • BIOS-Einstellungen unter Verwendung der Funktion zum Klonen von Servern Themen: • Konfigurieren von Steckplatznamen • Konfigurieren der iDRAC-Netzwerkeinstellungen • Erstes Startlaufwerk einstellen • Konfigurieren des Netzwerk-Uplinks des Schlittens
• Die Zeichenketten Server-1 bis Server-4 können verwendet werden, aber nur für den entsprechenden Steckplatz. Zum Beispiel ist Server-3 ein gültiger Name für Steckplatz 3, aber nicht für Steckplatz 4. Server-03 dagegen ist ein gültiger Name für einen beliebigen Steckplatz. ANMERKUNG: Um einen Steckplatznamen zu ändern, müssen Sie Berechtigungen als Gehäusekonfiguration-Administrator besitzen. Die Einstellung des Steckplatznamens in der Webschnittstelle befindet sich nur auf dem CMC.
Tabelle 15. QuickDeploy-Einstellungen Einstellung Beschreibung Maßnahme, wenn der Server eingefügt Wählen Sie eine der folgenden Optionen aus der Liste: wird • Keine Maßnahme – Keine Maßnahme wird ausgeführt, wenn der Server eingefügt wird. • Nur QuickDeploy – Wählen Sie diese Option aus, um iDRAC-Netzwerkeinstellungen zu aktivieren, wenn ein neuer Server in das Gehäuse eingesetzt wird. Die angegebenen Einstellungen zur automatischen Bereitstellung werden zum Konfigurieren des neuen iDRAC verwendet.
Einstellung Beschreibung würde die Fehlermeldung QuickDeploy IP address range is not fully within QuickDeploy Subnet angezeigt, wenn Sie entweder auf QuickDeployEinstellungen speichern oder auf Automatische Bestückung mit QuickDeployEinstellungen klicken. 3 iDRAC IPv4-Netzmaske Gibt die QuickDeploy-Subnetzmaske an, die allen neu eingefügten Servern zugewiesen ist. iDRAC IPv4-Gateway Gibt den schnellen Bereitstellungs-Standard-Gateway an, der allen DRACs, die sich im Gehäuse befinden, zugewiesen ist.
Abbildung 4. Vier Schlitten mit halber Breite im Gehäuse • Acht Schlitten mit Viertelbreite im Gehäuse: ANMERKUNG: Der Wert Reserved QuickDeploy IPAddresses (Reservierte QuickDeploy-IP-Adressen) muss mindestens auf 8 gesetzt werden. Abbildung 5. Acht Schlitten mit Viertelbreite im Gehäuse • Vier FM120x4-Schlitten im Gehäuse: ANMERKUNG: Der Wert Reserved QuickDeploy IPAddresses (Reservierte QuickDeploy-IP-Adressen) muss auf 16 gesetzt werden. Abbildung 6.
Ändern von iDRAC-Netzwerkeinstellungen für einen einzelnen Server-iDRAC Mithilfe dieser Funktion können Sie die iDRAC-Netzwerkkonfigurationseinstellungen für jeden installierten Server konfigurieren. Die anfänglichen Werte, die für jedes Feld angezeigt werden, sind die aktuellen vom iDRAC gelesenen Werte. Um diese Funktion zu verwenden, müssen Sie eine Enterprise-Lizenz aufweisen.
jedem Netzwerkpaket ein VLAN-Tag zugewiesen. VLAN-Tags sind Gehäuseeigenschaften. Sie bleiben mit dem Gehäuse verbunden, selbst wenn eine Komponente entfernt wird. ANMERKUNG: Die iDRAC-VLAN-Einstellungen werden nur dann wirksam, wenn die iDRAC-NIC-Auswahl auf dem iDRAC auf den (dedizierten) Gehäuse-LOM-Modus gesetzt ist. ANMERKUNG: Die mit dem CMC konfigurierte VLAN-ID wird nur dann auf den iDRAC angewendet, wenn sich der iDRAC im dedizierten Modus befindet.
festgelegt werden. So können Sie ein spezielles Image starten, um beispielsweise Diagnoseaufgaben durchzuführen oder ein Betriebssystem neu zu installieren. Sie können das erste Startgerät nur für den nächsten Start oder für alle nachfolgenden Neustarts einstellen. Sie können auch das erste Startgerät für den Server einstellen.
3 Wenn der Server bei jedem Hochfahren von dem ausgewählten Gerät starten soll, deaktivieren Sie die Option Einmalig starten für den betreffenden Server. Wenn der Server beim nächsten Hochfahren einmalig von dem ausgewählten Laufwerk starten soll, aktivieren Sie die Option Einmalig starten für den betreffenden Server. 4 Klicken Sie auf Anwenden, um die Einstellungen zu speichern.
ANMERKUNG: Wenn bei einer Zurückstufung von der CMC-Version 1.3 oder einer späteren Version die Schlitten-NetzwerkUplink-Konfiguration auf Erweiterte Netzwerkadapter-Isolierung gesetzt ist, ist die Schlitten-Netzwerk-Uplink-Konfiguration in der CMC-Version 1.2 oder früheren Versionen leer.
• BIOS und Start – Diese Gruppe umfasst die BIOS- und Starteinstellungen eines Servers. • Alle Einstellungen – Diese Version umfasst alle Einstellungen des Servers und der Komponenten auf diesem Server. Diese Profile werden generiert von: – Servern der 12. Generation mit iDRAC7 1.57.57 oder später und Lifecycle Controller 2 ab Version 1.1 – Servern der 13. Generation mit iDRAC8 2.05.05 mit Lifecycle Controller ab 2.00.00.00 Die Funktion zum Klonen von Servern unterstützt iDRAC7- und iDRAC8-Server.
ANMERKUNG: Wenn eine Remote-Freigabe verfügbar ist, können Sie maximal 100 Profile unter Verwendung des erweiterten CMC-Speichers und der Remote-Freigabe speichern. Weitere Informationen finden Sie unter Konfigurieren der Netzwerkfreigabe unter Verwendung der CMC Web-Schnittstelle Das Entfernen oder Deaktivieren eines nichtflüchtigen, erweiterten Speichermediums verhindert den Zugriff auf gespeicherte Profile und deaktiviert die Funktion „Erstellen von Server-Klonen“.
ANMERKUNG: Das Drop-Down-Menü Profil auswählen zeigt die verfügbaren Profile nach Typ sortiert an, einschließlich derjenigen, die sich im Repository und auf der SD-Karte befinden. 2 Wählen Sie aus dem Drop-down-Menü Profil auswählen das Profil aus, das Sie anwenden möchten. Die Option Profil anwenden wird aktiviert. 3 Klicken Sie auf Profil anwenden.
• Lokal oder SD-Karte, wenn sich die Quelldatei in der Netzwerkfreigabe befindet. Weitere Informationen finden Sie in der Online-Hilfe. 3 4 Wählen Sie, basierend auf den angezeigten Optionen, Lokal, Erweiterter Speicher oder Netzwerkfreigabe als Zielspeicherort. • Wenn Sie Lokal auswählen, erscheint ein Dialogfeld und Sie können das Profil in einem lokalen Verzeichnis speichern. • Wenn Sie Erweiterter Speicher oder Netzwerkfreigabe auswählen, wird das Dialogfeld Profil speichern angezeigt.
Anzeigen gespeicherter Profileinstellungen Zum Anzeigen der Profileinstellungen der gespeicherten Serverprofile wechseln Sie zur Seite Serverprofile. Klicken Sie im Abschnitt Serverprofile in der Spalte Profil anzeigen für den erforderlichen Server auf Anzeigen. Die Seite Einstellungen anzeigen wird angezeigt. Weitere Informationen zu den angezeigten Einstellungen finden Sie in der Online-Hilfe zu CMC für Dell PowerEdge FX2/FX2s.
Die aktuellen Profilzuweisungen werden für die Steckplätze in den Auswahllisten angezeigt, die in der Spalte Profil zuweisen enthalten sind. ANMERKUNG: Sie können die Quick Deploy-Maßnahme nur dann ausführen, wenn die Option Maßnahme beim Einfügen des Servers auf der Seite iDRAC bereitstellen auf Serverprofil oder Quick Deploy, dann Serverprofil eingestellt ist. Durch die Auswahl dieser Option können Sie das zugewiesene Serverprofil anwenden, sobald ein neuer Server in das Gehäuse eingefügt wird.
– Speichern Sie Vorlagen für Startidentitätsprofile, und passen Sie die Startidentitätsprofile auf der Netzwerkfreigabe durch Bearbeiten und Einfügen der SAN-Startparameter an, die von den einzelnen Servern verwendet werden. – Bereiten Sie die Server, die die Erstkonfiguration verwenden vor, bevor Sie die zugehörigen Startidentitätsprofile anwenden.
Anwenden von Startidentitätsprofilen Sie können Startidentitätsprofil-Einstellungen anwenden, wenn die Startidentitätsprofile als gespeicherte Profile auf der Netzwerkfreigabe verfügbar sind. Um die Konfiguration der Startidentitäten zu initiieren, können Sie ein gespeichertes Profil auf einen einzelnen Server anwenden. ANMERKUNG: Wenn ein Server Lifecycle Controller nicht unterstützt oder das Gehäuse ausgeschaltet ist, können Sie kein Profil auf den Server anwenden.
Anzeigen gespeicherter Startidentitätsprofile Rufen Sie zum Anzeigen der auf der Netzwerkfreigabe gespeicherten Startidentitätsprofile die Seite Serverprofile auf. Wählen Sie im Abschnitt Startidentitätsprofile > Gespeicherte Profile das Profil aus, und klicken Sie in der Spalte Profil anzeigen auf Anzeigen. Die Seite Einstellungen anzeigen wird angezeigt. Weitere Informationen über die angezeigten Einstellungen finden Sie in der CMC-Online-Hilfe.
• • • 06:00:00:00:00:00 - F6:FF:FF:FF:FF:FF 0A:00:00:00:00:00 - FA:FF:FF:FF:FF:FF 0E:00:00:00:00:00 - FE:FF:FF:FF:FF:FF Um die Option Virtuelle MAC-Adresse verwalten über die CMC Web-Schnittstelle anzuzeigen, wechseln Sie in der Strukturansicht zu Gehäuseübersicht > Serverübersicht. Klicken Sie auf Setup > Profile > Startidentitätsprofile. Der Abschnitt Virtuellen MAC-Adresspool verwalten wird angezeigt. ANMERKUNG: Die virtuellen MAC-Adressen werden in der Datei vmacdb.
ANMERKUNG: MAC-Adressen können nicht entfernt werden, wenn sie auf dem Knoten aktiv sind oder einem Profil zugeordnet sind. So entfernen Sie MAC-Adressen von der Netzwerkfreigabe: 1 Rufen Sie die Seite Serverprofile auf. Klicken Sie im Abschnitt Startidentitätsprofile > Virtuellen MAC-Adresspool verwalten auf MAC-Adressen entfernen. 2 Geben Sie die erste MAC-Adresse des MAC-Adresspools in das Feld Erste MAC-Adresse ein.
Beim Starten der iDRAC-Webschnittstelle über ein Mitgliedsgehäuses müssen in MCM die Anmeldeinformationen von Benutzern des Führungs- und Mitgliedsgehäuses identisch sein. Andernfalls wird die aktuelle Mitgliedsgehäusesitzung abgebrochen und die Anmeldeseite des Mitgliedsgehäuses wird angezeigt. Starten von iDRAC über die Serverstatusseite So starten Sie die iDRAC-Verwaltungskonsole für einen individuellen Server: 1 Erweitern Sie im linken Fensterbereich Server-Übersicht.
8 Konfigurieren von Speicherschlitten Speicherschlitten mit halber Breite, die in einem FX2s-Gehäuse verwendet werden, enthalten Folgendes: • Einen oder zwei RAID-Controller • Maximal 16 Festplattenlaufwerke Sie können einzelne Speicherschlitten mit zwei RAID-Controllern für den Betrieb in den folgenden Modi konfigurieren: • Split-Einzelmodus • Split-Dualmodus • Joined-Modus ANMERKUNG: Setzen Sie keinen Speicherschlitten in Steckplatz 1 des Gehäuses ein.
Wenn ein Speicherschlitten für den Split-Dualmodus konfiguriert ist und sich an einer Position befindet, an der er nicht mit zwei Rechnerschlitten verbunden werden kann, wird der zweite Controller mit keinem Rechnerschlitten verbunden. Sie müssen über die Berechtigung Gehäusekonfiguration-Administrator verfügen und den Rechnerschlitten ausschalten, um die Einstellung ändern zu können.
Sie können iDRAC RACADM auch im Remote-Zugriff aufrufen. Weitere Informationen finden Sie im Abschnitt RACADM Proxy im Dokument Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.10.10.10 RACADM Command Line Interface Reference Guide (RACADM-Referenzhandbuch für Befehlszeilenschnittstellen Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.10.10.10). ANMERKUNG: In dieser Version werden nur lokale und Remote-RACADM-Proxies unterstützt.
9 Konfigurieren von CMC für das Senden von Warnungen Sie können Warnungen und Maßnahmen für bestimmte Ereignisse einstellen, die auf dem Gehäuse eintreten. Dieser Fall tritt ein, wenn der Status einer Systemkomponente den vordefinierten Zustand überschreitet.
Warnungen über RACADM aktivieren oder deaktivieren Um die Erstellung von Warnungen zu aktivieren oder zu deaktivieren, verwenden Sie das RACADM-Objekt cfgAlertingEnable. Weitere Informationen finden Sie im Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide (RACADM-Befehlszeilen-Referenzhandbuch für Dell Chassis Management Controller für PowerEdge FX2/FX2s). Filtern von Warnungen Sie können Warnungen auf der Basis der Kategorie und des Schweregrads filtern.
ANMERKUNG: Der CMC verwendet die standardmäßige SNMP-Community-Zeichenkette öffentlich. Um eine bessere Sicherheit zu gewährleisten, wird empfohlen, dass die standardmäßige Community-Zeichenkette geändert und ein Wert eingestellt wird. • 3 Wählen Sie unter Aktiviert das Kontrollkästchen der entsprechenden Ziel-IP aus, um die IP-Adresse zum Empfangen der Traps zu aktivieren. Sie können bis zu vier IP-Adressen festlegen. Klicken Sie auf Anwenden, um die Einstellungen zu speichern.
Konfigurieren von Einstellungen für E-Mail-Warnungen Wenn der CMC ein Gehäuseereignis ermittelt, wie z. B. eine Umgebungswarnung oder einen Komponentenfehler, kann er so konfiguriert werden, dass eine E-Mail-Warnung an eine oder mehrere E-Mail-Adressen gesendet wird. Sie müssen den SMTP-E-Mail-Server so konfigurieren, dass von der CMC-IP-Adresse weitergeleitete E-Mails angenommen werden können; eine Funktion, die bei den meisten Mail-Servern aus Sicherheitsgründen normalerweise deaktiviert ist.
wobei () der Name der Person oder Gruppe ist, die E-Mail-Warnungen empfängt, und der Indexwert ist, den Sie in Schritt 4 und 5 angegeben haben. Der E-Mail-Name darf bis zu 32 alphanumerische Zeichen, Bindestriche, Unterstriche und Punkte enthalten. Leerstellen sind nicht gültig. 6 Einrichten des SMTP-Hosts: racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain Dabei ist host.domain die FQDN.
10 Konfigurieren von Benutzerkonten und Berechtigungen Sie können Benutzerkonten mit spezifischen Berechtigungen (rollenbasierte Autorität) einrichten, um Ihr System mit CMC zu verwalten und die Systemsicherheit zu gewährleisten. Standardmäßig ist CMC mit einem Standard-root-Konto konfiguriert. Als Administrator können Sie Benutzerkonten einrichten, damit andere Benutzer auf CMC zugreifen können. Sie können maximal 16 lokale Benutzer einrichten oder Verzeichnisdienste benutzen, wie z. B.
Berechtigung Beschreibung Es ist möglich, dass ein Benutzer andere Berechtigungen ohne CMC-Anmeldebenutzerberechtigung besitzt. Diese Funktion ist nützlich, wenn ein Benutzer vorübergehend nicht dazu berechtigt ist, sich anzumelden. Wenn die CMC-Anmeldeberechtigung dieses Benutzers wiederhergestellt ist, erhält der Benutzer alle zuvor gewährten Berechtigungen zurück. GehäusekonfigurationAdministrator Benutzer können Daten hinzufügen oder ändern, die: • • • • • das Gehäuse identifizieren, z. B.
Berechtigung Beschreibung Wenn ein CMC-Benutzer, der nicht über die Server Administrator-Berechtigung verfügt, eine Maßnahme ausgibt, die auf einem Server ausgeführt werden soll, sendet der CMC einen Befehl an den Zielserver mit dem Anmeldenamen und Kennwort des Benutzers. Wenn der Benutzer auf dem Server nicht vorhanden ist oder das Kennwort nicht übereinstimmt, wird dem Benutzer das Ausführen der Maßnahme verweigert.
Benutzergruppe Gewährte Berechtigungen Hauptbenutzer • Struktur A-Administrator • • • • • • Anmelden Administrator zum Löschen von Protokollen Gehäusesteuerungs-Administrator (Strombefehle) Server Administrator Warnungstests für Benutzer Struktur A-Administrator Gastbenutzer Anmelden Custom (Benutzerdefiniert) Wählen Sie eine beliebige Kombination der folgenden Berechtigungen aus: • • • • • • • • • Keine CMC-Anmeldung, Benutzer Gehäusekonfiguration-Administrator Benutzerkonfigurations-Administra
So ändern Sie das Standardkennwort für das Stammkonto: 1 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht, und dann auf Benutzerauthentifizierung. 2 Klicken Sie auf der Seite Benutzer, in der Spalte Benutzer-ID auf 1. ANMERKUNG: Die Benutzer-ID 1 ist das Stammbenutzerkonto, das standardmäßig mit CMC geliefert wird. Dies kann nicht geändert werden. 3 Wählen Sie auf der Seite Benutzerkonfiguration die Option Kennwort ändern aus.
Um zu überprüfen, ob ein Benutzer existiert, öffnen Sie eine Telnet/SSH-Textkonsole auf dem CMC, melden Sie sich an und geben Sie dann den folgenden Befehl einmal für jeden Index von 1–16 ein: racadm getconfig -g cfgUserAdmin -i ANMERKUNG: Sie können auch racadm getconfig -f eingeben, und die Datei myfile.cfg, in der alle CMCKonfigurationsparameter enthalten sind, anzeigen oder bearbeiten. Mehrere Parameter und Objekt-IDs werden mit ihren aktuellen Werten angezeigt.
In Active Directory wird ein Standardgruppenobjekt als Rollengruppe verwendet. Ein Benutzer, der Zugang zum CMC hat, ist ein Mitglied der Rollengruppe. Um diesem Benutzer Zugriff auf einen bestimmten CMC zu gewähren, muss der Rollengruppenname und dessen Domänenname auf der jeweiligen CMC Karte konfiguriert werden. Die Rolle und die Berechtigungsebene wird auf jeder CMC Karte und nicht im Active Directory definiert. Sie können bis zu fünf Rollengruppen für jeden CMC konfigurieren.
Konfigurieren des erweiterten Active Directory-Schemas So konfigurieren Sie Active Directory für den Zugriff auf CMC: 1 Erweitern des Active Directory-Schemas. 2 Active Directory-Benutzer und Computer-Snap-In erweitern. 3 CMC-Benutzer mit Berechtigungen zum Active Directory hinzufügen. 4 Aktivieren Sie SSL auf allen Domänen-Controllern. 5 Konfigurieren Sie die CMC Active Directory-Eigenschaften über die CMC-Web-Schnittstelle oder RACADM.
ANMERKUNG: Weitere Informationen zu den verschiedenen Feldern finden Sie in der OnlineHilfe. • Allgemeine Einstellungen • Für LDAP zu verwendenden Server: – Statischer Server – Geben Sie den vollständig qualifizierten Domänennamen (FQDN) oder die IP-Adresse und die LDAPSchnittstellennummer ein. – DNS-Server – Geben Sie den DNS-Server an, um eine Liste von LDAP-Servern durch Suchen nach deren SRV-Einträgen im DNS abzurufen. Die folgende DNS-Abfrage wird für SRV-Einträge durchgeführt: _[Service Name]._tcp.
Der CMC kann so konfiguriert werden, dass er optional einen DNS-Server auf SRV-Einträge abfragt. Falls die Eigenschaft cfgLDAPSRVLookupEnable aktiviert ist, wird die Eigenschaft cfgLDAPServer ignoriert. Die folgende Abfrage wird für die Suche nach SRV-Einträgen im DNS verwendet: _ldap._tcp.domainname.com ldap in der obigen Abfrage ist die Eigenschaft cfgLDAPSRVLookupServiceName. cfgLDAPSRVLookupDomainName ist als domainname.com konfiguriert.
11 Konfigurieren von CMC für Single sign-on oder Smart Card-Anmeldung Dieser Abschnitt enthält Informationen zum Konfigurieren von CMC für die Smart Card-Anmeldung sowie für die einfache Anmeldung (Single Sign-On, SSO) von Active Directory-Benutzern. SSO verwendet Kerberos als Authentifizierungsmethode, die Benutzern, die sich mit automatischer oder einfacher Anmeldung angemeldet haben, nachfolgende Anwendungen wie Exchange ermöglicht.
ANMERKUNG: Falls Sie Active Directory unter Microsoft Windows 2003 verwenden, müssen Sie sicherstellen, dass die neuesten Service-Packs auf dem Clientsystem installiert sind. Falls Sie Active Directory unter Microsoft Windows 2008 verwenden, müssen Sie sicherstellen, dass SP1 sowie die folgenden Hotfixes installiert sind: Windows6.0-KB951191-x86.msu für das Dienstprogramm KTPASS. Ohne dieses Patch erzeugt das Dienstprogramm fehlerhafte Keytab-Dateien. Windows6.0-KB957072-x86.
So generieren Sie eine Keytab-Datei mithilfe des ktpass-Tools: 1 Führen Sie das Dienstprogramm ktpass auf dem Domänen-Controller (Active Directory-Server) aus, auf dem Sie den CMC einem Benutzerkonto in Active Directory zuordnen möchten. 2 Verwenden Sie den folgenden ktpass-Befehl, um die Kerberos-Keytab-Datei zu erstellen: C:\>ktpass -princ HTTP/cmcname.domain_name.com@REALM_NAME.COM - mapuser dracname -mapOp set crypto DES-CBC-MD5 -ptype KRB5_NT_PRINCIPAL -pass * -out c:\krbkeytab ANMERKUNG: Der cmcnam
3 Klicken Sie auf Erweitert und dann auf das Register Netzwerk. 4 Klicken Sie auf Einstellungen. 5 Wählen Sie Manuelle Proxy-Konfiguration. 6 Geben Sie im Feld Kein Proxy für die Adressen für die CMCs und iDRACs im Verwaltungsnetzwerk ein; verwenden Sie dazu die kommagetrennte Liste. Sie können DNS-Namen und Platzhalter in Ihren Einträgen verwenden.
Befehl erneut ausführen. Weitere Informationen finden Sie im Referenzhandbuch Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide (RACADM-Befehlszeilen-Referenzhandbuch für Dell Chassis Management Controller für PowerEdge FX2/FX2s) unter dell.com/support/manuals. Hochladen der Keytab-Datei Die Kerberos-Keytab-Datei liefert die CMC-Benutzername-Kennwort-Anmeldeinformationen für das KDC (Kerberos Data Center), das wiederum Zugriff auf das Active Directory ermöglicht.
12 Konfigurieren von CMC für die Verwendung von Befehlszeilenkonsolen Dieser Abschnitt enthält Informationen über die Funktionen der CMC-Befehlszeilenkonsole (bzw. die serielle/Telnet-/Secure Shell-Konsole) und erklärt, wie das System eingerichtet wird, sodass Systemverwaltungsmaßnahmen über die Konsole ausgeführt werden können.
Befehl Beschreibung Reference Guide (RACADM-Befehlszeilen-Referenzhandbuch für Dell Chassis Management Controller für PowerEdge FX2/FX2s). connect Stellt eine Verbindung zur seriellen Konsole eines Servers oder eines E/A-Moduls her. Weitere Informationen finden Sie unter Herstellen einer Verbindung mit Servern oder E/A-Modulen mit dem connect-Befehl. ANMERKUNG: Sie können auch den RACADM Befehl connect verwenden. exit, logout und quit Alle diese Befehle führen die gleiche Maßnahme aus.
Unterstützte SSH-Verschlüsselungssysteme Um mit CMC über das SSH-Protokoll zu kommunizieren, unterstützt es verschiedene Verschlüsselungsschemas, die in der folgenden Tabelle aufgelistet sind. Tabelle 22.
Beispiel: zwei öffentliche Schlüssel, einer mit Anmerkung PC1 und einer mit Anmerkung PC2: racadm getssninfo Type User IP Address Date/Time SSH PC1 x.x.x.x 09:00:00 SSH PC2 x.x.x.x 09:00:00 Login 06/16/2009 06/16/2009 Weitere Informationen zu sshpkauth finden Sie im Chassis Management Controller for PowerEdge FX2/FX2s Command Line Reference Guide (Befehlszeilen-Referenzhandbuch für Chassis Management Controller für PowerEdge FX2/FX2s).
ANMERKUNG: Der Befehl connect stellt die Option –b (binär) bereit. Die Option –b übergibt binäre Rohdaten, und cfgSerialConsoleQuitKey wird nicht verwendet. Zudem verursachen Übergänge beim DTR-Signal (z. B. wenn das serielle Kabel entfernt wird, um eine Verbindung eines Debuggers herzustellen) keine Beendigung der Anwendung, wenn eine Verbindung zu einem Server über die serielle CMC-Konsole hergestellt wird.
3 Wechseln Sie zu Serielle Kommunikation und drücken Sie die . Im Dialogfeld wird die Liste zur seriellen Kommunikation mit den folgenden Optionen angezeigt: • off • Ein ohne Konsolenumleitung • Ein mit Konsolenumleitung über COM1 Um zwischen Optionen hin und her zu navigieren, verwenden Sie die entsprechenden Pfeiltasten. ANMERKUNG: Achten Sie darauf, dass die Option Ein mit Konsolenumleitung über COM1 ausgewählt ist.
timeout=10 #splashimage=(hd0,2)/grub/splash.xpm.gz serial --unit=1 --speed=57600 terminal --timeout=10 serial title Red Hat Linux Advanced Server (2.4.9-e.3smp) root (hd0,0) kernel /boot/vmlinuz-2.4.9-e.3smp ro root= /dev/sda1 hda=ide-scsi console=ttyS0 console= ttyS1,57600 initrd /boot/initrd-2.4.9-e.3smp.img title Red Hat Linux Advanced Server-up (2.4.9-e.3) root (hd0,00) kernel /boot/vmlinuz-2.4.9-e.3 ro root=/dev/sda1 initrd /boot/initrd-2.4.9-e.3.img Folgen Sie beim Bearbeiten der Datei /etc/grub.
l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Things to run in every runlevel. ud::once:/sbin/update # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few # minutes of power left. Schedule a shutdown for 2 minutes from now. # This does, of course, assume you have power installed and your # UPS is connected and working correctly.
Verwalten von CMC unter Verwendung von iDRACRACADM-Proxy Der CMC kann unter Verwendung von iDRAC-RACADM-Proxy verwaltet werden, wenn sich der CMC nicht im Netzwerk befindet. Die folgende Tabelle zeigt die Zuweisung von CMC-Berechtigungen zu iDRAC-Berechtigungen für den Proxy-Vorgang. Tabelle 24.
13 Verwenden von FlexAddress- und FlexAddress Plus-Karten Dieser Abschnitt enthält Informationen über FlexAddress und die Verwendung der FlexAddress Plus-Karte zur Konfiguration von FlexAddress. ANMERKUNG: Die FlexAddress-Funktion ist lizenziert. Diese Lizenz ist in der Enterprise-Lizenz enthalten.
Über FlexAddress Plus Jede FlexAddress Plus-Funktionskarte enthält einen eindeutigen Pool aus MAC/WWNs, mit dessen Hilfe das Gehäuse World Wide Name/ Media Access Control (WWN/MAC)-Adressen für Fibre Channel- und Ethernet-Geräte zuweisen kann. Die vom Gehäuse zugewiesenen WWN/MAC-Adressen sind global eindeutig und gelten für einen bestimmten Serversteckplatz.
Tabelle 25. Statusmeldungen, zurückgegeben vom Befehl featurecard -s Statusmeldung Maßnahmen No feature card inserted. Prüfen Sie den CMC um sicherzustellen, dass die SD-Karte korrekt eingesetzt wurde. The feature card inserted is valid and contains the following feature(s) FlexAddress: bound. Keine Maßnahme erforderlich. The feature card inserted is valid and contains the following feature(s) FlexAddress: bound to another chassis, svctag=ABC1234, SD card SN = 1122334455.
Weitere Informationen zu diesem Befehl finden Sie im Abschnitt zum feature-Befehl im Referenzhandbuch Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide (RACADM-Befehlszeilen-Referenzhandbuch für Dell Chassis Management Controller für PowerEdge FX2/FX2s). FlexAddress konfigurieren FlexAddress ist eine optionale Erweiterung, die es ermöglicht, die werkseitig zugewiesenen WWN/MAC-IDs der Servermodule mit einer WWN/MAC-ID des Gehäuses zu ersetzen.
Tabelle 26. FlexAddress-Befehle und Ausgaben Situation Befehl $racadm featurecard -s SD-Karte im CMC-Modul ist an eine andere Service-Tag-Nummer gebunden. Ausgabe The feature card inserted is valid and contains the following feature(s) FlexAddress: bound to another chassis, svctag = SD card SN = $racadm featurecard -s SD-Karte im CMC-Modul ist an die gleiche Service-Tag-Nummer gebunden.
Situation Befehl Ausgabe ANMERKUNG: Um dieses Problem zu beheben, müssen Sie eine FlexAddress-Aktivierungs-Lizenz aufweisen. FlexAddress DELL SOFTWARELIZENZVEREINBARUNG Dies ist ein rechtlich bindender Vertrag zwischen Ihnen, dem Benutzer, und Dell Products L.P oder Dell Global B.V. ("Dell").
Dell und seinen Lieferanten und Ihr ausschließlicher Anspruch beschränkt sich auf (a) Rückerstattung des Kaufpreises der Software oder (b) den Ersatz von Datenträgern, die der vorstehenden Garantie nicht genügen, sofern diese unter Angabe einer Rücksendegenehmigungsnummer an Dell geschickt werden, wobei Sie das Risiko und die Kosten tragen.
Vereinbarung ist unabhängig von den anderen Bestimmungen gültig. Wenn es sich herausstellt, dass eine Bestimmung der vorliegenden Vereinbarung nicht durchsetzbar ist, so wird die Gültigkeit und Durchsetzbarkeit der übrigen Bestimmungen und Bedingungen davon nicht berührt. Diese Vereinbarung ist für Rechtsnachfolger und Abtretungsempfänger bindend.
Weitere Informationen zu den Feldern finden Sie in der Online-Hilfe zu CMC für Dell PowerEdge FX2/FX2s. Anzeigen von grundlegenden WWN/MACAdressinformationen unter Verwendung der Webschnittstelle Um die WWN/MAC-Adressen-Informationen für jeden Serversteckplatz oder für alle Server in einem Gehäuse anzuzeigen, gehen Sie im Basismodus folgendermaßen vor: 1 Klicken Sie auf Server-Übersicht > Eigenschaften > WWN/MAC Auf der Seite WWN/MAC-Zusammenfassung werden die WWN/MAC-Adressinformationen angezeigt.
3 Klicken Sie in der Tabelle WWN/MAC-Adressen auf Exportieren, um die WWN/MAC-Adressen lokal zu speichern. 4 Klicken Sie auf das neben einem Steckplatz, oder klicken Sie auf Expand/Collapse All (Alle erweitern/reduzieren), um die für einen bestimmten Steckplatz oder alle Steckplätze aufgeführten Attribute in der Tabelle mit den WWN/MAC-Adressen ein- oder auszublenden.
Um die Konsolen-zugewiesene MAC/WWN für alle LOMs oder Mezzanine-Karten anzuzeigen, verwenden Sie den folgenden RACADMBefehl: racadm getmacaddress -c all Um die Gehäuse-zugewiesene WWN/MAC-Adresse anzuzeigen, verwenden Sie den folgenden RACADM-Befehl: racadm getmacaddress -c flexaddress Um die MAC/WWN-Adressen für alle LOMs oder Mezzanine-Karten anzuzeigen, verwenden Sie den folgenden RACADM-Befehl: racadm getmacaddress -c factory Weitere Informationen zu den Unterbefehlen getflexaddr und getmacaddress find
14 Verwalten von Strukturen Das Gehäuse unterstützt zwei Fabric-Typen: Fabric A1 und Fabric A2, die von beiden E/A-Modulen verwendet werden und immer mit den integrierten Ethernet-Adaptern der Server verbunden sind. ANMERKUNG: Im PowerEdge FX2s-Gehäuse bilden die Fabrics B und C die PCIe-Verbindung zu den PCIe Extension-Karten. Die folgenden E/A-Module werden unterstützt: • 1-GbE-Pass-Through • 10-GbE-Pass-Through • E/A-Aggregator Beide Fabrics unterstützen nur Ethernet.
ANMERKUNG: Die Netzwerkeinstellungen des E/A-Moduls für Ethernet-Passthrough und Infiniband-Schalter dürfen nicht konfiguriert werden. Konfigurieren der Netzwerkeinstellungen für EAMs unter Verwendung der CMC Web-Schnittstelle So konfigurieren Sie die Netzwerksicherheitseinstellungen für E/A-Module: 1 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht, dann auf E/A-Modul-Übersicht, und klicken Sie dann auf Setup.
Alle EAMs (1-2) erscheinen in der erweiterten Liste. 2 Klicken Sie auf das EAM (Steckplatz), das Sie anzeigen möchten. Es wird die E/A-Modulstatusseite für den jeweiligen EAM-Steckplatz angezeigt. Die Tabellen für den E/A-Modul-Uplink- und Downlinkstatus werden angezeigt. Diese Tabellen enthalten Informationen zu den Downlink-Ports (1-8) und zu den Uplink-Ports (9-12). Weitere Informationen finden Sie in der Online-Hilfe zu CMC für Dell PowerEdge FX2/FX2s.
Die Seite „EAM-Firmware-Aktualisierung“ wird angezeigt. Sie können alternativ auch eine der folgenden Seiten aufrufen: • Gehäuseübersicht > Aktualisieren. • Gehäuseübersicht > Gehäuse-Controller > Aktualisieren. Die Seite Firmware-Aktualisierung mit einem Link für den Zugriff auf die Seite EAM-Firmware und Software, wird angezeigt.
Starten der EAA/MXL-GUI über die Seite „E/A-Modulstatus“ Klicken Sie in der Verzeichnisstruktur unter I/O Module Overview (E/A-Modulübersicht) auf einen EAA-/MXL-Switch. Klicken Sie auf der Seite I/O Module Status (Status des E/A-Moduls) auf Launch I/O Module GUI (E/A-Modul-GUI starten). Die EAA-/MXL-Anmeldeseite wird angezeigt.
15 Verwenden des VLAN-Managers Sie können die VLAN-Einstellungen der EAMs mithilfe der Option VLAN-Manager zuweisen oder anzeigen. ANMERKUNG: Diese Funktion wird nur auf dem Dell PowerEdge E/A-Aggregator unterstützt. Nachdem der Modus des E/A-Aggregators von „Stacking“ auf „Standalone“ geändert wurde, löschen Sie die Startkonfiguration und laden Sie den E/A-Aggregator erneut. Sie brauchen die Systemkonfiguration während des erneuten Ladens des E/A-Aggregators nicht speichern.
4 Wählen Sie die Option Alle auswählen oder Auswahl aufheben aus, um die Änderungen an allen oder keinem EAM(s) vorzunehmen. oder Markieren Sie das Kontrollkästchen für die entsprechenden Steckplätze, um die erforderlichen EAMs auszuwählen. 5 Geben Sie im Abschnitt VLANs bearbeiten die VLAN-IDs für die EAMs ein. Geben Sie VLAN-IDs im Bereich von 1 bis 4094 ein. VLANIDs können als Bereich oder getrennt durch Komma eingetragen werden. 6 Wählen Sie ggf.
Die Seite VLAN-Manager wird angezeigt. 2 Wählen Sie im Abschnitt E/A Modül wählen die erforderlichen EAMs. 3 Im Abschnitt VLANs bearbeiten wählen Sie VLANs entfernen aus der Dropdown-Liste aus und klicken Sie auf Anwenden. Die den ausgewählten EAMs zugewiesenen VLANs werden entfernt. Die Meldung „Vorgang erfolgreich“ wird angezeigt. Die aktuellen den EAMs zugewiesenen VLAN-Einstellungen werden im Feld VLANZuweisung, Zusammenfassung angezeigt.
16 Energieverwaltung und -überwachung Das PowerEdge FX2/FX2s-Gehäuse ist der energieeffizienteste Server auf dem Markt. Er ist für hocheffiziente Netzteile und Lüfter konzipiert, verfügt über ein optimiertes Layout, sodass die Luft leichter durch das System strömen kann, und verfügt im gesamten Gehäuse über energieoptimierte Komponenten.
• • • Anzeigen des Strombudgetstatus unter Verwendung der CMC Web-Schnittstelle Anzeigen des Strombudgetstatus unter Verwendung von RACADM Redundanzstatus und gesamter Stromfunktionszustand Redundanzregeln Eine Redundanzregel ist ein konfigurierbarer Satz von Eigenschaften, die festlegen, wie der CMC den Strom im Gehäuse verwaltet.
ANMERKUNG: Ändern Sie die modulare Gehäuseredundanzregel, während das Gehäuse ausgeschaltet ist. Standard-Redundanzkonfiguration Nur Redundanzwarnungen ist die Standard-Redundanzkonfiguration für ein Gehäuse und zwei Netzteile. Anpassen von Schlitten mit mehreren Knoten Der PowerEdge FM120x4 ist ein Schlitten mit mehreren Knoten und halber Breite, der vier Server mit dem zugehörigen iDRAC mit unabhängigen Prozessoren aufnehmen kann.
Anzeigen des Strombudgetstatus unter Verwendung der CMC Web-Schnittstelle Wechseln Sie zum Anzeigen des Strombudgetstatus unter Verwendung der CMC Web-Schnittstelle im linken Fenster zu Gehäuseübersicht, und klicken Sie auf Strom > Budgetstatus.
Die folgende Tabelle listet die SEL-Einträge auf, die mit Netzteiländerungen zusammenhängen: Tabelle 27. SEL-Ereignisse für Netzteiländerungen Netzteilereignis Systemereignisprotokoll (SEL)-Eintrag Einfügen Netzteil ist vorhanden. Entfernung Netzteil ist nicht vorhanden. Wechselstromeingang Die Stromzufuhr vom Netzteil wurde wiederhergestellt. Wechselstrom-Eingangsverlust Verlust der Stromzufuhr vom Netzteil. Gleichstromausgabe hergestellt Netzteil funktioniert normal.
Konfigurieren von Strombudget und Redundanz unter Verwendung der CMC Web-Schnittstelle ANMERKUNG: Um Stromverwaltungsmaßnahmen durchführen zu können, müssen Sie die Berechtigung als Gehäusekonfigurations-Administrator besitzen. So konfigurieren Sie das Strombudget 1 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > Strom > Konfiguration. 2 Wählen Sie auf der Seite Budget/Redundanzkonfiguration jede oder alle der folgenden Eigenschaften, Ihren Anforderungen entsprechend, aus.
• Um den Normalbetrieb wiederherzustellen, geben Sie Folgendes ein: racadm config -g cfgChassisPower -o cfgChassisMaxPowerConservationMode 0 • Geben Sie zur Aktivierung der Remote-Stromverbrauchsprotokollierungsfunktion den folgenden Befehl ein: racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingEnabled 1 • Geben Sie zur Angabe des gewünschten Protokollierungszeitraums den folgenden Befehl ein: racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingInterval n wobei n 1-1440 Minuten se
3 • System ausschalten • System aus- und wieder einschalten (Hardwareneustart) • Reset CMC (Warmstart) • Nicht-ordentliches Herunterfahren Klicken Sie auf Anwenden. Ein Dialogfeld wird eingeblendet, das Sie zur Bestätigung auffordert. 4 Klicken Sie auf OK, um die Energieverwaltungsmaßnahme auszuführen (z. B. das System zurückzusetzen).
Stromsteuerungsvorgänge auf EAM unter Verwendung der CMCWebschnittstelle ausführen So führen Sie auf einem E/A-Modul Stromsteuerungsvorgänge aus: 1 Klicken Sie im linken Fensterbereich auf Gehäuseübersicht > E/A-Modul-Übersicht > Strom. 2 Wählen Sie auf der Seite Stromsteuerung für EAM aus dem Drop-Down-Menü den Vorgang aus, den Sie ausführen möchten (Ausund einschalten). 3 Klicken Sie auf Anwenden.
17 Konfigurieren von PCIe-Steckplätzen Das PowerEdge FX2-/FX2s-Gehäuse enthält optional acht PCIe-Steckplätze, wobei die einzelnen PCIe-Steckplätze einem bestimmten Schlitten zugewiesen sind. Standardmäßig sind alle PCIe-Steckplätze zugeordnet. Sie können die Zuweisung der PCIe-Steckplätze zu den Servern über die CMC-Webschnittstelle oder mit RACADM-Befehlen aktivieren oder deaktivieren.
PCIe-Steckplatz Zuordnung für Schlitten mit Viertelbreite (PowerEdge FC430) PCIe-Steckplatz 5 3b PCIe-Steckplatz 6 3a PCIe-Steckplatz 7 1b PCIe-Steckplatz 8 1a ANMERKUNG: Die PCIe-Verwaltung wird nur für PowerEdge FX2s und nicht für PowerEdge FX2 unterstützt. Weitere Informationen über die Zuordnung von PCIe-Steckplätzen finden Sie im PowerEdge FD332-Benutzerhandbuch Dell PowerEdge FD332 Owner’s Manual.
Um zum Beispiel die Eigenschaften von PCIe-Gerät 1 anzuzeigen, führen Sie den folgenden Befehl aus. racadm getpciecfg -c pcie.chassisslot.1 • Führen Sie zum Anzeigen der bestehenden PCIe-Konfigurationseinstellungen den folgenden Befehl aus: racadm getconfig –g cfgPCIe ANMERKUNG: Die PCIe-Karte wird nicht eingeschaltet, wenn die Zusatzkarte nicht auf dem zugehörigen Schlitten vorhanden ist.
Aktivieren oder Deaktivieren der PCIe-Neuzuweisung unter Verwendung von RACADM Die Eingabewerte für das Aktivieren oder Deaktivieren der PCIe-Neuzuweisung zu einem Steckplatz sind: • 1 – Aktivieren • 0 – Deaktivieren Führen Sie zum Aktivieren der PCIe-Neuzuweisung den folgenden Befehl aus: racadm config –g cfgPCIe –o cfgPCIeReassignmentEnable 1 Führen Sie zum Deaktivieren der PCIe-Neuzuweisung den folgenden Befehl aus: racadm config –g cfgPCIe –o cfgPCIeReassignmentEnable 0 Weitere Informationen finden
18 Fehlerbehebung und Wiederherstellung Dieser Abschnitt erklärt, wie Tasks unter Verwendung der CMC-Webschnittstelle ausgeführt werden, die sich auf die Wiederherstellung und Behebung eines Problems auf dem Remote-System beziehen. • Gehäuseinformationen anzeigen. • Ereignisprotokolle anzeigen. • Konfigurationsinformationen, Fehlerstatus und Fehlerprotokolle sammeln. • Diagnosekonsole verwenden. • Strom auf einem Remote-System verwalten.
Unterstützte Schnittstellen • CLI-RACADM • Remote-RACADM • Telnet-RACADM racdump beinhaltet die folgenden Untersysteme und fasst die folgenden RACADM-Befehle zusammen. Weitere Informationen zu racdump finden Sie im Referenzhandbuch Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide (RACADM-Befehlszeilen-Referenzhandbuch für Dell Chassis Management Controller für PowerEdge FX2/FX2s). Tabelle 32.
Erste Schritte, um Fehler an einem Remote-System zu beheben Die folgenden Fragen werden häufig für die Fehlerbehebung bei Problemen auf hoher Ebene auf dem verwalteten System gestellt: • Ist das System ein- oder ausgeschaltet? • Wenn eingeschaltet, funktioniert das Betriebssystem, antwortet es nicht oder reagiert es nicht mehr? • Wenn ausgeschaltet, wurde der Strom unerwartet ausgeschaltet? Strombezogene Fehlerbehebung Die folgenden Informationen sind Ihnen bei der Fehlerbehebung bei Netzteilen und be
bestätigt, ist es am besten, die Pakete auf dem verwalteten System mit Hilfe eines Netzwerkanalysators oder eines Hilfsprogramms wie snmputil von Microsoft zu verfolgen. Ereignisprotokolle anzeigen Sie können Hardware- und Gehäuseprotokolle für Informationen über systemkritische Ereignisse, die auf dem verwalteten System auftreten, anzeigen. Hardwareprotokoll anzeigen Der CMC erstellt ein Hardwareprotokoll von Ereignissen, die im Gehäuse auftreten.
Komponenten zurücksetzen Sie können den CMC zurücksetzen oder Server virtuell neu einsetzen und somit bewirken, dass sie sich so verhalten, als seien sie herausgenommen und wieder eingesetzt worden. ANMERKUNG: Zum Zurücksetzen von Komponenten müssen Sie die Berechtigung als Debug-Befehl-Administrator besitzen. ANMERKUNG: Der virtuelle Neustart ist für die einzelnen Knoten des PowerEdge FM120x4 nicht verfügbar.
Überprüfen Sie zur Behebung von Fehlern, die mit NTP in Verbindung stehen, die Informationen im CMC-Ablaufverfolgungsprotokoll. Dieses Protokoll enthält eine Fehlermeldung für NTP-bezogene Ausfälle.
Tabelle 33.
Komponente Netzteil PCI Speicherschlitten LED-Farbe, Blinkmuster Status Gelb, beständig leuchtend Lüftertyp nicht erkannt, aktualisieren Sie die CMCFirmware Gelb blinkend Lüfterfehler; außerhalb Drehzahlmessbereich Gelb, dunkel Nicht verwendet (Oval) Grün, beständig leuchtend Wechselstrom OK (Oval) Grün, blinkend Nicht verwendet (Oval) Grün, dunkel Wechselstrom nicht OK Gelb, beständig leuchtend Nicht verwendet Gelb blinkend Fehler Gelb, dunkel Kein Fehler (Kreis) Grün, beständig leu
So rufen Sie Wiederherstellungsinformationen ab: 1 Installieren Sie ein NULL-Modemkabel zwischen einem CMC-System und einem Client-Computer. 2 Öffnen Sie einen Terminalemulator Ihrer Wahl (z. B. HyperTerminal oder Minicom). Stellen Sie Folgendes ein,wenn Sie dazu aufgefordert werden: 8 Bit, keine Parität, keine Ablaufsteuerung, Baudrate 115200. Bei einem Kernspeicherfehler wird alle 5 Sekunden eine Fehlermeldung angezeigt. 3 Drücken Sie die Eingabetaste.
• DHCP - Verfolgt Pakete, die an einen DHCP-Server gesendet und von ihm empfangen werden. • DDNS - Verfolgt dynamische Aktualisierungsanfragen und Antworten des DNS-Servers. • Konfigurationsänderungen an den Netzwerkschnittstellen. Das Ablaufverfolgungsprotokoll kann auch spezifische Fehlercodes der CMC-Firmware enthalten, die sich auf die interne CMC-Firmware beziehen und nicht auf das Betriebssystem des verwalteten Systems.
Lösung: Es ist eine Gehäusekonfigurationsberechtigung erforderlich, um Speichermodullizenzen zu importieren, zu exportieren oder zu löschen. Zurücksetzen eines vergessenen Administratorkennworts VORSICHT: Manche Reparaturarbeiten dürfen nur von qualifizierten Servicetechnikern durchgeführt werden. Führen Sie die Fehlerbehebung oder einfache Reparaturen so durch, wie dies laut Produktdokumentation genehmigt ist, oder wenn Sie vom Team des Online- oder Telefonsupports dazu aufgefordert werden.
ANMERKUNG: Elektrostatische Entladung (ESD) kann den CMC beschädigen. Unter bestimmten Bedingungen können sich elektrostatische Ladungen an Ihrem Körper oder einem Gegenstand, beispielsweise einem Peripheriegerät, aufbauen und anschließend durch den Kontakt mit einem anderen Objekt, z. B. Ihrem Computer, entladen.
19 Häufig gestellte Fragen In diesem Abschnitt werden häufig gestellte Fragen zu den folgenden Themen aufgelistet: • • • • RACADM Remote-System verwalten und wiederherstellen Active Directory EAM Themen: • • • • • RACADM Verwalten und Wiederherstellen eines Remote-Systems Active Directory EAM Ereignis- und Fehlermeldungen RACADM Nach dem Ausführen eines CMC-Resets (mithilfe des RACADM-Unterbefehls racreset), wenn ein Befehl eingegeben wird, wird die folgende Meldung angezeigt: racadm Transp
Eine Fehlermeldung Not Found wird beim Verwenden der Befehle $ logout und $ quit angezeigt. Verwalten und Wiederherstellen eines RemoteSystems Wenn ich auf die CMC-Schnittstelle zugreife, erhalte ich eine Sicherheitswarnung, die besagt, dass der Host-Name des SSLZertifikats nicht mit dem Host-Namen des CMC übereinstimmt. Der CMC enthält ein Standard-CMC-Serverzertifikat zur Sicherung der Netzwerksicherheit für die Webschnittstelle und die RemoteRACADM-Funktionen.
Als Teil der Ermittlung versucht IT Assistant, die Get- und Set-Community-Namen des Geräts zu überprüfen. Im IT Assistant ist der GetCommunity-Name = public und der Set-Community-Name = private. Standardmäßig ist der Community-Name für den CMC-Agenten „public“. Wenn IT Assistant eine Set-Aufforderung sendet, erstellt der CMC-Agent den SNMP-Authentifizierungsfehler, da er nur Aufforderungen von Community = public akzeptiert. Ändern des CMC-Community-Namens mit RACADM.
Generieren Sie zur Wiederherstellung eine CSR, erstellen Sie ein neues Webzertifikat von Microsoft Certificate Services und laden Sie es dann durch Ausführen der folgenden RACADM-Befehle hoch: racadm sslcsrgen [-g] [-f {filename}] racadm sslcertupload -t 1 -f {web_sslcert} EAM Nach einer Konfigurationsänderung zeigt CMC manchmal die IP-Adresse als 0.0.0.0. an. Sie müssen die Aktualisierungsschaltfläche betätigen, um zu sehen, ob die IP-Adresse im Switch korrekt festgelegt wurde.