Reference Guide

46 | Aggregator Management
www.dell.com | support.dell.com
Terminal Lines
You can access the system remotely and restrict access to the system by creating user profiles. The terminal
lines on the system provide different means of accessing the system. The virtual terminal lines (VTY)
connect you through Telnet to the system.
Telnet to Another Network Device
To telnet to another device (Figure 5-4):
Figure 5-4. Telnet to Another Network Device
Task Command Syntax Command Mode
Telnet to the stack-unit.You do not need to configure the management port
on the stack-unit to be able to telnet to it.
telnet-peer-stack-unit
EXEC Privilege
Telnet to a device with an IPv4 address. If you do not enter an IP address,
FTOS enters a Telnet dialog that prompts you for one.
• Enter an IPv4 address in dotted decimal format (A.B.C.D)
telnet [ip-address]
EXEC Privilege
FTOS#telnet 10.11.206.66
Trying 10.11.206.66...
Connected to 10.11.206.66.
Exit character is '^]'.
cmc-9MZ0TS1.localdomain login: root
Password:
Welcome to the CMC firmware version 4.30.X03.201207271729
$