Reference Guide

72 | Data Center Bridging (DCB)
www.dell.com | support.dell.com
Remote is enabled, Priority list
Remote Willing Status is
enabled
Operational status (enabled or disabled) of peer device for DCBX exchange of
PFC configuration with a list of the configured PFC priorities.
Willing status of peer device for DCBX exchange (Willing bit received in
PFC TLV): enabled or disabled.
Local is enabled DCBX operational status (enabled or disabled) with a list of the configured
PFC priorities.
Operational status (local port) Port state for current operational PFC configuration:
Init: Local PFC configuration parameters were exchanged with peer.
Recommend: Remote PFC configuration parameters were received from peer.
Internally propagated: PFC configuration parameters were received from
configuration source.
PFC DCBX Oper status Operational status for exchange of PFC configuration on local port: match
(up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of PFC parameters:
Feature - for legacy DCBX versions; Symmetric - for an IEEE version.
TLV Tx Status Status of PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV:
FCOE TLV Tx Status
Status of FCoE advertisements in application priority TLVs from local DCBX
port: enabled or disabled.
Application Priority TLV:
ISCSI TLV Tx Status
Status of ISCSI advertisements in application priority TLVs from local DCBX
port: enabled or disabled.
Application Priority TLV:
Local FCOE Priority Map
Priority bitmap used by local DCBX port in FCoE advertisements in
application priority TLVs.
Application Priority TLV:
Local ISCSI Priority Map
Priority bitmap used by local DCBX port in ISCSI advertisements in
application priority TLVs.
Application Priority TLV:
Remote FCOE Priority Map
Priority bitmap received from the remote DCBX port in FCoE advertisements
in application priority TLVs.
Application Priority TLV:
Remote ISCSI Priority Map
Priority bitmap received from the remote DCBX port in iSCSI advertisements
in application priority TLVs.
PFC TLV Statistics:
Input TLV pkts
Number of PFC TLVs received.
PFC TLV Statistics:
Output TLV pkts
Number of PFC TLVs transmitted.
PFC TLV Statistics:
Error pkts
Number of PFC error packets received.
PFC TLV Statistics:
Pause Tx pkts
Number of PFC pause frames transmitted.
PFC TLV Statistics:
Pause Rx pkts
Number of PFC pause frames received
Table 6-3. show interface pfc summary Command Description
Field Description