Concept Guide

Dell 8/4Gbps FC SAN Module Administrator’s Guide 63
53-1001345-01
supportShow
B
Saving support information for chassis:HL_5100_66, module:RAS...
Saving support information for chassis:HL_5100_66, module:TRACE_OLD...
Saving support information for chassis:HL_5100_66, module:TRACE_NEW...
Saving support information for chassis:HL_5100_66, module:FABRIC...
Saving support information for chassis:HL_5100_66, module:CORE_FFDC...
Saving support information for chassis:HL_5100_66, module:DIAG...
Saving support information for chassis:HL_5100_66, module:RTE...
Saving support information for chassis:HL_5100_66, module:ISCSID_DBG...
Saving support information for chassis:HL_5100_66, module:AGDUMP...
Saving support information for chassis:HL_5100_66, module:SSHOW_PLOG...
Saving support information for chassis:HL_5100_66, module:SSHOW_OS...
Saving support information for chassis:HL_5100_66, module:SSHOW_EX...
Saving support information for chassis:HL_5100_66, module:SSHOW_FABRIC...
Saving support information for chassis:HL_5100_66, module:SSHOW_SERVICE...
Saving support information for chassis:HL_5100_66, module:SSHOW_SEC...
Saving support information for chassis:HL_5100_66, module:SSHOW_NET...
......(output truncated)
supportShow
Displays switch information for debugging purposes.
Synopsis supportshow [[slotnumber/]portnumber1-portnumber2] [lines]
Description Use this command to display support information from groups of preselected FC SAN Module OS
and Linux commands and other support and debugging information. You can specify the range of
ports for which to display this information. These commands are organized by groups, but note that
the order of the groups listed below is not the same as executed by the command.
SupportShow executes commands in the following command groups. Use supportShowCfgenable
or supportShowCfgDisable to modify the settings for each group.
os OS group commands, enabled by default.
exception Exception group commands, enabled by default.
port Port group commands, enabled by default.
fabric Fabric group commands, enabled by default.
services Service group commands, enabled by default.
security Security group commands, enabled by default.
network Network group commands, enabled by default.
portlog Portlog group commands, enabled by default.
system System group commands, enabled by default.
extend Extend group commands, disabled by default.
filter Filter group commands, disabled by default.
perfmon Performance Monitor group commands, disabled by default.
ficon FICON group commands, disabled by default.
iswitch FC Router group commands, disabled by default.
asic_db ASIC DB group commands, disabled by default.