Owners Manual

Blade 7 I/O Module
B1 C1 C2 B2
Mezz4_Fab_B Port 15 Port 15
Table 12. I/O Module Port Assignments - Full-Height Blades (not applicable for PowerEdge M610x)
Blade 8 I/O Module
B1 C1 C2 B2
Mezz1_Fab_C Port 8 Port 8
Mezz2_Fab_B Port 8 Port 8
Mezz3_Fab_C Port 16 Port 16
Mezz4_Fab_B Port 16 Port 16
The following figure shows the port connections for a full-height blade in bay 3 with four mezzanine cards.
Figure 16. Example of Full-Height Blade Port Mapping – Blade 3 (not applicable for PowerEdge M610x)
Quad-Port Mezzanine Cards
The following table illustrates the I/O module port mapping for full-height blades with quad-port mezzanine cards.
NOTE:
For a detailed mapping of each PowerEdge system, see Quadport Capable Hardware for the M1000e Modular
Chassis at support.dell.com/manuals.
36 Configuring The I/O Modules