Owners Manual

Table 13. Example of I/O Module Port Assignments - PowerEdge M610x in Slot 2
Blade n and Blade (n + 8)
NOTE: n denotes a
variable value from 1 to
8.
I/O Module
B1 C1 C2 B2
Mezz_FAB_B_Blade n_Port1 Portn
Mezz_FAB_B_Blade n_Port2 Portn
Mezz_FAB_B_Blade n_Port3 Port(n+16)
Mezz_FAB_B_Blade n_Port4 Port(n+16)
Mezz_FAB_C_Blade n_Port1 Portn
Mezz_FAB_C_Blade n_Port2 Portn
Mezz_FAB_C_Blade n_Port3 Port(n+16)
Mezz_FAB_C_Blade n_Port4 Port(n+16)
Mezz_FAB_B_Blade n
+8_Port1
Port(n+8)
Mezz_FAB_B_Blade n
+8_Port2
Port(n+8)
Mezz_FAB_B_Blade n
+8_Port3
Port(n+24)
Mezz_FAB_B_Blade n
+8_Port4
Port(n+24)
Mezz_FAB_C_Blade n
+8_Port1
Port(n+8)
Mezz_FAB_C_Blade n
+8_Port2
Port(n+8)
Mezz_FAB_C_Blade n
+8_Port3
Port (n+24)
Mezz_FAB_C_Blade n
+8_Port4
Port(n+24)
NOTE: Even though PowerEdge M610x is a full blade system, only two mezzanine card slots (MEZZ1_Fab_C1 and
MEZZ2_FAB_B1) in the expansion bay are available for use. The other two slots on the system board (MEZZ1_FAB_C
and MEZZ2_FAB_B) are occupied by the mezzanine interface card which provides connectivity between the PCIe
expansion-card riser and the system board.
The following table illustrates the I/O module port mapping for PowerEdge M610x in bay n.
Table 14. Example of I/O Module Port Assignments - PowerEdge M610x Blade 1
Blade 1 I/O Module
A1 B1 C1 C2 B2 A2
Mezzanine Card C (port 1
and port 2)
Port 9 Port 9
Mezzanine Card C (port 3
and port 4)
Port 25 Port 25
Mezzanine Card B (port 1
and port 2)
Port 9 Port 9
Mezzanine Card B (port 1
and port 2)
Port 25 Port 25
Configuring The I/O Modules 37