Owners Manual

CAUTION: To protect the I/O connector pins, install the I/O connector covers any time a blade is removed from the

enclosure.

NOTE: A full-height blade requires four connector covers and a half-height blade requires two connector covers.

5. Install the I/O connector cover over the I/O connector.

Figure 37. Removing and Installing a Half-Height Blade

blade handle 2. release button

3. blade 4. guide rail on enclosure

5. guide rail on blade (or blade blank)

Figure 38. Removing and Installing a Full-Height Blade

blade handle 2. release button

3. blade 4. guide rail on enclosure

5. guide rail on blade (or blade blank)

62 Installing Enclosure Components