Owners Manual

e. Click Apply.
The CMC automatically fails over to the redundant module, and that module now becomes active and displays a solid blue status LED.
The SD card activates automatically.
For information on configuration and usage of the FlexAddress feature, see the CMC User’s Guide at support.dell.com/manuals.
Figure 46. Installing an SD Card in the CMC Module
a. SD card connector
b. SD card
iKVM Module
Removing An iKVM Module
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Disconnect the cables attached to the iKVM module.
2. Press in the release latch on the handle and rotate the handle away from the module front panel.
3. Slide the module out of the enclosure.
4. Install the I/O connector cover.
Installing Enclosure Components
73