Owners Manual

Removing The LCD Module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

simple repairs as authorized in your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow

the safety instructions that are shipped with your product.

1. Rotate the LCD module so that the underside of the module faces upward.

2. Remove the cable cover.

3. Disconnect the ribbon cable.

4. Remove the two Torx T8 screws securing the LCD module to the hinges.

Figure 53. Removing and Installing the LCD Module

cable cover 2. LCD module

3. ribbon cable 4. hinges (2)

5. Torx T8 screws (2)

Installing The LCD Module

CAUTION:

Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

simple repairs as authorized in your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow

the safety instructions that came with the product.

1. Attach the new LCD module to the hinges using the two Torx T8 screws.

2. Connect the ribbon cable to the module, and reinstall the cable cover.

Installing Enclosure Components