Deployment Guide

33 Dell Networking FC Flex IOM: Deployment of FCoE with Dell FC Flex IOM, Brocade FC switches,
and Dell Compellent Storage Array
Deployment/Configuration Guide
21. Right click Team1_VLAN5, click Properties. Select Internet Protocol Version 4 (TCP/IPv4) and click the
Properties button. Enter the respective IP information (Figure 27), and click the OK button.
Figure 27 Configuring the NIC team interface with the correct IP information
The next step is to configure the Dell MXL switch w/ FC Flex IOM.
4.2 Dell MXL w/ FC Flex IOM Configuration
Below is the full configuration for the Dell MXL w/ FC Flex IOM for both fabric A and fabric B. Note, VLT
is employed between the Dell S6000s down to the MXLs; this configuration provides active-active links
of a port-channel that has members going to two separate switches for redundancy purposes.
Configuration steps:
1. Create the VLT Domain and LACP LAG up to the VLT (Enable RSTP as a best practice for
configuring VLT).