Deployment Guide

46 Dell Networking FC Flex IOM: Deployment of FCoE with Dell FC Flex IOM, Brocade FC switches,
and Dell Compellent Storage Array
Deployment/Configuration Guide
Figure 35 Confirming to keep the default value for ‘Replay Profiles’
10. The last step in configuring the Dell Compellent Storage Center array is mapping the newly
created volume to the server. Once you create the volume, you will be asked if you want to map it
to a server object. You can do it at this time or later. If mapping the volume to a server object later,
on the left-hand pane under Storage > Volumes, simply right click on the volume you just created
and select Map Volume to Server. You can then select the respective server object that you
created prior.
11. As soon as the FCoE adapter on the Windows server detects storage available for it, it will be
detected in the Windows disk management administration tool after performing a disk scan. To
perform a disk scan, right click Disk Management on the left-hand pane and select Rescan Disks.
You must right click the detected virtual disk and initialize it. Below in Figure 36, you can see the
disk (Disk 1) has already been initialized and formatted as NTFS.