53-1001768-01 30 March 2010 Fabric OS MIB Reference Supporting Fabric OS v6.4.
Copyright © 2006-2010 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, IronPoint, IronShield, IronView, IronWare, JetCore, NetIron, SecureIron, ServerIron, StorageX, and TurboIron are registered trademarks, and DCFM, Extraordinary Networks, and SAN Health are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries.
Document Title Publication Number Summary of Changes Publication Date Brocade Fabric OS MIB Reference Manual 53-0000521-08 Updated to support the Brocade 4100. September 2004 Brocade Fabric OS MIB Reference Manual 53-0000521-09 Updated to support the Brocade 48000 and 200E. April 2005 Brocade Fabric OS MIB Reference Manual 53-1000045-01 Updated to support the Brocade 4900, 7500, and FR4-18i blade.
Contents About This Document In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xii What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 MIB-II (RFC1213-MIB) In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 MIB II overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 MIB-II object hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Textual conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Objects and types imported . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4 Entity MIB Objects In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Entity MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Entity MIB system organization of MIB objects . . . . . . . . . . . .118 Definitions for Entity MIB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Textual conventions for Entity MIB . . . . . . . . . . . . . . . . . . . . . . . . . .120 Entity MIB objects . . . .
HA-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 High-Availability group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 FRU Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 FRU History Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 CP Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
fcipConnStatsTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287 Chapter 10 iSCSI MIB Objects In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289 iSCSI MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289 iSCSI MIB system organization of MIB objects . . . . . . . . . . . .289 iscsiInstanceAttributesTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iSCSI instance information variables. . . . . . . . . . . . . . . . . . . . . . . .321 Appendix B MIB OIDs and their Matching Object Names MIB OIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi • Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii • What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii • Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv • Additional information . . . . . . . . . . .
• Appendix B, “MIB OIDs and their Matching Object Names,” provides a listing of the MIB object names and the corresponding MIB Object ID (OID) associated with each. Supported hardware and software In those instances in which procedures or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not.
- FC10-6 port blade FR4-18i router blade FX8-24 DCX Extension Blade • Brocade 48000 director - FA4-18 Fibre Channel application blade - FC4-16 port blade - FC4-16IP - FC4-32 port blade - FC4-48 port blade - FC10-6 port blade - FR4-18i router blade • Brocade VA-40FC What’s new in this document The following changes have been made since this document was last released: • Information that was added: - Support for Brocade FC8-64 port blade, and Brocade VA-40FC - MIB Capability enhancement - Desired Severity
For further information about new features and documentation updates for this release, refer to the release notes. Document conventions This section describes text formatting conventions and important notices formats.
DANGER A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety labels are also attached directly to products to warn of these conditions or situations. Key terms For definitions specific to Brocade and Fibre Channel, see the technical glossaries on MyBrocade. See “Brocade resources” on page xv for instructions on accessing MyBrocade.
Release notes are available on the MyBrocade website and are also bundled with the Fabric OS firmware. Other industry resources For additional resource information, visit the Technical Committee T11 website. This website provides interface standards for high-performance and mass storage applications for Fibre Channel, storage management, and other applications: http://www.t11.org For information about the Fibre Channel industry, visit the Fibre Channel Industry Association website: http://www.fibrechannel.
• • • • Brocade 7600—On the bottom of the chassis Brocade 48000—Inside the chassis next to the power supply bays Brocade DCX—On the bottom right on the port side of the chassis Brocade DCX-4S—On the bottom right on the port side of the chassis, directly above the cable management comb 3. World Wide Name (WWN) Use the licenseIdShow command to display the WWN of the chassis.
xviii Fabric OS MIB Reference 53-1001768-01
Chapter Understanding Brocade SNMP 1 In this chapter • Setting the SNMP security level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Understanding SNMP basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Loading Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 • Access Gateway and Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Understanding SNMP basics TABLE 1 Security level options Security level Protocol Query behavior Traps No security [0] (noAuthnoPriv) SNMPv1 SNMPv3 Allowed. Allowed. Sent. Sent. Authentication only [1] (authNoPriv) SNMPv1 SNMPv3 Allowed. All SNMPv3 users allowed except noAuthNoPriv users. Sent. Sent for all SNMPv3 users except noAuthNoPriv users. Authentication and Privacy [2] (authPriv) SNMPv1 SNMPv3 Not allowed. Only SNMPv3 users with authPriv privilege are allowed. Not Sent.
Understanding SNMP basics 1 The agent can receive queries from one or more management stations and can send traps to up to six management stations. Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy.
1 Understanding SNMP basics Use a MIB browser to access the MIB variables: all MIB browsers perform queries and load MIBs. Since different vendors vary the information in their private enterprise MIBs, it is necessary to verify their information. The Fibre Channel MIB standards dictate that certain information be included in all MIBs: it is the vendors’ responsibility to follow the standards. The standards are as follows: • FibreAlliance (FA) MIB: Brocade supports v3.0. and later releases.
Understanding SNMP basics 1 An event trap (swEventTrap, connUnitEventTrap, or swFabricWatchTrap) is basically an error message (errShow output) that is SNMP-formatted and delivered. FA traps Consider enabling the FA traps if you want to use SNMP to monitor multiple connectivity units, including Brocade switches.
1 Loading Brocade MIBs 5. swFabricWatchTrap This trap is generated when any Fabric Watch threshold is reached. Desired severity level is introduced to filter swFabricWatchTrap based on severity level. 6. swTrackChangesTrap This trap is generated by a login or a logout. 7. swIPv6ChangeTrap This trap is generated when an IPv6 address status change event occurs. It is generated only when IPv6 stateless state to deprecation state and not for just address change notification. 8.
Loading Brocade MIBs 1 Brocade MIB files The Brocade MIB files are as follows: • • • • • • • • • • • • bd.mib BRCD_REG.mib BRCD_TC.mib brcdfcip.mib CPQ_HOST.mib CPQ_RACK.mib FA.mib FE_EXP.mib FICON.mib HA.mib IBMBladeCenterTrapMIB.mib SW.mib Standard MIBS: Distribution of standard MIBs has been stopped from v6.4.0. Download the following MIBs from http://www.oidview.
1 Loading Brocade MIBs Before loading MIBs Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (Table 2). TABLE 2 Fabric OS-supported SNMP versions Firmware SNMPv1 SNMPv2 1 SNMPv3 Yes2 Fabric OS v5.x Yes Yes Fabric OS v6.0.0 Yes Yes Yes Fabric OS v6.1.0 Yes Yes Yes Fabric OS v6.2.0 Yes Yes Yes Fabric OS v6.1.2_CEE Yes No Yes Fabric OS v6.3.0 Yes No Yes Fabric OS v6.4.0 Yes No Yes 1.
Loading Brocade MIBs 1 Select one RFC1155-SMI FICON_v5_0.mib FICON-MIB BRCD.mib Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x, 6.x BD.mib FOS 6.4 Brocade-TC FOS 6.4 Brocade-REG-MIB FOS 6.4 SW_v5_5.mib FOS 2.6.x, 3.x, 4.x, 5.x Select one RFC1213-MIB MIB-II RFC2571 SNMP-FRAMEWORKMIB RMON MIB ISCSI_RFC4544.mib FA_v2_2.mib FCMGMT-MIB FOS 2.6.x SW_v5_7.mib FOS 6.x FA.mib FCMGMT-MIB FOS 3.x, 4.x, 5.x, 6.x SW.mib FOS 6.4 ENTITY_RFC2737.mib ENTITY-MIB HA.mib FC_RFC4044.mib FCIP.
1 Loading Brocade MIBs NOTE FA_v3_0.mib obsoletes the use of the connUnitPortStatFabricTable used in the FA_v2_2.mib. FA_v3_0.mib now uses the connUnitPortStatTable for port statistics. The FA_v3_0.mib and the FA_v2_2.mib cannot be loaded concurrently on the same SNMP management system. The FE_RFC2837.mib and the FE_EXP.mib can be loaded concurrently on the same SNMP management system. The FE_EXP.mib was listed in the experimental OID section. The FE_RFC2837.
Loading Brocade MIBs 1 New Priv Passwd: Verify Priv Passwd: Engine ID: [0:0:0:0:0:0:0:0:0] 80:00:05:23:01:0A:23:34:1B User (rw): [snmpadmin3] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser1] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..
1 Loading Brocade MIBs Engine ID: 00:00:00:00:00:00:00:00:00 User 5 (ro): snmpuser2 Auth Protocol: noAuth Priv Protocol: noPriv Engine ID: 00:00:00:00:00:00:00:00:00 User 6 (ro): snmpuser3 Auth Protocol: noAuth Priv Protocol: noPriv Engine ID: 00:00:00:00:00:00:00:00:00 SNMPv3 Trap configuration: Trap Entry 1: 10.35.52.33 Trap Port: 162 Trap User: snmpadmin1 Trap recipient Severity level: 4 Trap Entry 2: 10.35.52.
Loading Brocade MIBs 1 To send all traps to the configured recipients: DCX_54:root> snmpTraps --send Number of traps sent : 27 To send all traps to the recipient 10.35.52.33: DCX_54:root> snmpTraps --send -ip_address 10.35.52.33 Number of traps sent : 27 To send the sw-fc-port-scn trap to the confiregured recipients: DCX_54:root> snmpTraps --send -trap_name sw-fc-port-scn Number of traps sent : 1 To send the sw-fc-port-scn trap to the recipient 10.35.52.
1 Loading Brocade MIBs To enable the SW-MIB MIB only without changing the current trap configuration: switch:admin> snmpconfig --enable mibCapability -mib_name SW-MIB Operation succeeded switch:admin> snmpconfig --show mibCapability [...] SW-MIB: YES swFault: NO swSensorScn: NO swFCPortScn: NO swEventTrap: YES DesiredSeverity:None swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: NO swIPv6ChangeTrap: NO swPmgrEventTrap: NO swFabricReconfigTrap: NO swFabricSegmentTrap: NO swExtTrap: NO [...
Loading Brocade MIBs 1 swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: YES swIPv6ChangeTrap: YES swPmgrEventTrap: YES swFabricReconfigTrap: YES swFabricSegmentTrap: YES swExtTrap: YES FA-TRAP: YES connUnitStatusChange: YES connUnitDeletedTrap: YES connUnitEventTrap: YES connUnitSensorStatusChange: YES connUnitPortStatusChange: YES FICON-TRAP: YES linkRNIDDeviceRegistration: YES linkRNIDDeviceDeRegistration: YES linkLIRRListenerAdded: YES linkLIRRListenerRemoved: YES linkRLIRFailureIncident
1 Access Gateway and Brocade MIBs SNMP GET Security Level: Authentication and Privacy SNMP SET Security Level: Authentication and Privacy 4. In the Manager (SNMP Browser), create a user snmpadmin1 with Authentication protocol as noAuth, Privacy protocol as noPriv, set the password and set the trap port as 162. (Same values are set as in the switch SNMPv3 configuration.) Access Gateway and Brocade MIBs Brocade Access Gateway supports the following MIBs (Table 3) TABLE 3 .
Fabric OS commands for configuring SNMP 1 Fabric OS commands for configuring SNMP Use the following commands (Table 4) to configure MIBs in the Fabric OS. Refer to the Fabric OS Administrator’s Guide for procedures for configuring SNMP on the Brocade switches. TABLE 4 Commands for configuring SNMP Command Description snmpConfig This command has all the features of the existing agtcfg* commands; in addition, it has SNMPv3 configuration parameters. Enhanced in Fabric OS v6.3.
1 Fabric OS commands for configuring SNMP TABLE 5 Detailed description of the commands (Continued) Command Operands Arguments mibCapability Selects configuration parameters related to the SNMP agent’s MIBs and trap capability parameters. These parameters include MIBs and traps supported by the SNMP agent. systemGroup Selects configuration parameters related to the system group. These parameters include sysDescr, sysLocation, sysContact, and authentication failure trap.
Support for Administrative Domains TABLE 5 1 Detailed description of the commands (Continued) Command Operands Arguments snmptraps --send [-trap_name trap_name] [-ip_address ip_address] --send Sends one or all SNMP traps to all configured recipients or to a specified recipient. -trap_name trap_name Specifies the trap by name. Use snmptraps --show for a listing of valid traps. -ip_address ip_address Specifies the recipient by its IP address. The IP address must be specified in IPv4 format.
1 20 Support for Virtual Fabric Fabric OS MIB Reference 53-1001768-01
Chapter 2 MIB-II (RFC1213-MIB) In this chapter • MIB II overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • System group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Interfaces group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • AT group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 MIB II overview MIB-II object hierarchy Figure 6 through Figure 17 depict the organization and structure of MIB-II. - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - rmon - iFMIB FIGURE 6 MIB-II overall hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.
MIB II overview 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress 1.3.6.1.2.1.2.2.1.6 - ifAdminStatus 1.3.6.1.2.1.2.2.1.7 - ifOperStatus 1.3.6.1.2.1.2.2.1.8 - ifLastChange 1.3.6.1.2.1.2.2.1.9 - ifInOctets 1.3.6.1.2.1.2.2.1.10 - ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 - ifInNUcastPkts 1.3.
2 MIB II overview - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - ipInDelivers 1.3.6.1.2.1.4.9 - ipOutRequests 1.3.6.1.2.1.4.10 - ipOutDiscards 1.3.6.1.2.1.4.11 - ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.14 - ipReasmOKs 1.
MIB II overview 2 - icmp (1.3.6.1.2.1.5) - icmpInMsgs 1.3.6.1.2.1.5.1 - icmpInErrors 1.3.6.1.2.1.5.2 - icmpInDestUnreachs 1.3.6.1.2.1.5.3 - icmpInTimeExcds 1.3.6.1.2.1.5.4 - icmpInParmProbs 1.3.6.1.2.1.5.5 - icmpInSrcQuenchs 1.3.6.1.2.1.5.6 - icmpInRedirects 1.3.6.1.2.1.5.7 - icmpInEchos 1.3.6.1.2.1.5.8 - icmpInEchoReps 1.3.6.1.2.1.5.9 - icmpInTimestamps 1.3.6.1.2.1.5.10 - icmpInTimestampReps 1.3.6.1.2.1.5.11 - icmpInAddrMasks 1.3.6.1.2.1.5.12 - icmpInAddrMaskReps 1.3.6.1.2.1.5.13 - icmpOutMsgs 1.3.6.1.2.
2 MIB II overview - tcp - (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 - tcpConnEntry 1.3.6.1.2.1.6.13.1 - tcpConnState 1.3.6.1.2.1.6.13.1.
MIB II overview 2 - egp - (1.3.6.1.2.1.8) egpInMsgs egpInErrors egpOutMsgs egpOutErrors egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode - egpNeighEventTrigger - egpAs FIGURE 14 EGP hierarchy - snmp (1.3.6.1.2.1.11) - snmpInPkts 1.3.6.1.2.1.11.1 - snmpOutPkts 1.3.6.1.
2 MIB II overview - rmon (1.3.6.1.2.1.16) - statistics 1.3.6.1.2.1.16.1 - etherStatsTable 1.3.6.1.2.1.16.1.1 - etherStatsEntry 1.3.6.1.2.1.16.1.1.1 - etherStatsIndex 1.3.6.1.2.1.16.1.1.1.1 - etherStatsDataSource 1.3.6.1.2.1.16.1.1.1.2 - etherStatsDropEvents 1.3.6.1.2.1.16.1.1.1.3 - etherStatsOctets 1.3.6.1.2.1.16.1.1.1.4 - etherStatsPkts 1.3.6.1.2.1.16.1.1.1.5 - etherStatsBroadcastPkts 1.3.6.1.2.1.16.1.1.1.6 - etherStatsMulticastPkts 1.3.6.1.2.1.16.1.1.1.7 - etherStatsCRCAlignErrors 1.3.6.1.2.1.16.1.1.1.
MIB II overview 2 - ifMIB (1.3.6.1.2.1.31) - ifXTable 1.3.6.1.2.1.31.1.1 - ifXentry 1.3.6.1.2.1.31.1.1.1 - ifName 1.3.6.1.2.1.31.1.1.1.1 - ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 - ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 - ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 - ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 - ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 - ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 - ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 - ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 - ifHCOutOctets 1.3.6.1.2.1.
2 System group System group All systems must implement the System group. If an agent is not configured to have a value for any of the System group variables, a string of length 0 is returned. sysDescr 1.3.6.1.2.1.1.1 A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software. Format Set command Default This must contain only printable ASCII characters.
sysName 1.3.6.1.2.1.1.5 2 sysName 1.3.6.1.2.1.1.5 An administratively assigned name for this managed node. By convention, this is the node’s fully qualified domain name. Default Set command Preassigned name of the logical switch. Set this value using the snmpconfig command. sysLocation 1.3.6.1.2.1.1.6 The physical location of this node (for example, telephone closet, 3rd floor). The minimum length of the string must be 4. Default Set command End User Premise Set this value using the snmpconfig command.
2 ifNumber 1.3.6.1.2.1.2.1 ifNumber 1.3.6.1.2.1.2.1 The number of network interfaces and existing FC ports present on this system, regardless of their current state. This number will vary across platforms (switches). The return value is dynamic for all Brocade switches and depends on the number of GbE ports, FC ports and transport interfaces. ifTable 1.3.6.1.2.1.2.2 A list of interface entries. The number of entries is given by the value of ifNumber.
ifType 1.3.6.1.2.1.2.2.1.3 2 • For transport interface- FCIP tunnel ID • For FC ports- Port name (if set), otherwise, FC port ifType 1.3.6.1.2.1.2.2.1.3 The type of interface, designated by the physical link protocols immediately below the network layer in the protocol stack.
2 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 The interface's address at the protocol layer immediately below the network layer in the protocol stack. Values For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length. • eth0 returns the MAC address for GbE ports • lo returns null • SNMP represents the FC port ID in ASCII hex represenation.
ifLastChange 1.3.6.1.2.1.2.2.1.9 2 ifLastChange 1.3.6.1.2.1.2.2.1.9 The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. ifInOctets 1.3.6.1.2.1.2.2.1.10 The total number of octets received on the interface, including framing characters. ifInUcastPkts 1.3.6.1.2.1.2.2.1.
2 ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 The total number of packets that were requested, by higher-level protocols, to be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.
atTable 1.3.6.1.2.1.3.1 2 atTable 1.3.6.1.2.1.3.1 The Address Translation group contains one table, which is the union across all interfaces of the translation tables for converting a network address (for example, an IP address) into a subnetwork-specific address. This document refers to such a subnetwork-specific address as a physical address. For example, for broadcast media, where ARP is in use, the translation table is equivalent to the ARP cache; on an X.
2 ipDefaultTTL 1.3.6.1.2.1.4.2 ipDefaultTTL 1.3.6.1.2.1.4.2 The default value inserted into the time-to-live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol. ipInReceives 1.3.6.1.2.1.4.3 The total number of input datagrams received from interfaces, including those received in error. ipInHdrErrors 1.3.6.1.2.1.4.
ipOutRequests 1.3.6.1.2.1.4.10 2 ipOutRequests 1.3.6.1.2.1.4.10 The total number of IP datagrams that local IP user protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. ipOutDiscards 1.3.6.1.2.1.4.11 The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (for example, for lack of buffer space).
2 ipFragOKs 1.3.6.1.2.1.4.17 NOTE This is not necessarily a count of discarded IP fragments, because some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. ipFragOKs 1.3.6.1.2.1.4.17 The number of IP datagrams that have been successfully fragmented at this entity. ipFragFails 1.3.6.1.2.1.4.
ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4 2 ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4 The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.
2 ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value.
ipRouteAge 1.3.6.1.2.1.4.21.1.10 2 Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. ipRouteAge 1.3.6.1.2.1.4.21.1.10 The number of seconds since this route was last updated or otherwise determined to be correct. Older semantics cannot be implied except through knowledge of the routing protocol by which the route was learned. Not supported. ipRouteMask 1.3.6.1.2.1.4.21.1.
2 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 NOTE The IP address translation table contains the IP address to physical address equivalences. Some interfaces do not use translation tables for determining address equivalences. For example, DDN-X.25 has an algorithmic method; if all interfaces are of this type, then the Address Translation table is empty. ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 Each entry contains one IP address to physical address equivalence.
icmpInMsgs 1.3.6.1.2.1.5.1 2 icmpInMsgs 1.3.6.1.2.1.5.1 The total number of ICMP messages that the entity received. This counter includes all ICMP messages counted by icmpInErrors. icmpInErrors 1.3.6.1.2.1.5.2 The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on). icmpInDestUnreachs 1.3.6.1.2.1.5.3 The number of ICMP Destination Unreachable messages received. icmpInTimeExcds 1.3.6.1.2.1.5.
2 icmpInTimestampReps 1.3.6.1.2.1.5.11 icmpInTimestampReps 1.3.6.1.2.1.5.11 The number of ICMP Timestamp Reply messages received. icmpInAddrMasks 1.3.6.1.2.1.5.12 The number of ICMP Address Mask Request messages received. icmpInAddrMaskReps 1.3.6.1.2.1.5.13 The number of ICMP Address Mask Reply messages received. icmpOutMsgs 1.3.6.1.2.1.5.14 The total number of ICMP messages that this entity attempted to send. NOTE This counter includes all those counted by icmpOutErrors. icmpOutErrors 1.3.6.1.2.1.5.
icmpOutRedirects 1.3.6.1.2.1.5.20 2 icmpOutRedirects 1.3.6.1.2.1.5.20 The number of ICMP Redirect messages sent. For a host, this object is always 0, since hosts do not send redirects. icmpOutEchos 1.3.6.1.2.1.5.21 The number of ICMP Echo (request) messages sent. icmpOutEchoReps 1.3.6.1.2.1.5.22 The number of ICMP Echo Reply messages sent. icmpOutTimestamps 1.3.6.1.2.1.5.23 The number of ICMP Timestamp (request) messages sent. icmpOutTimestampReps 1.3.6.1.2.1.5.
2 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMin 1.3.6.1.2.1.6.2 The minimum value permitted by a TCP implementation for the retransmission time-out, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission time-out. In particular, when the time-out algorithm is 3 (rsre), an object of this type has the semantics of the LBOUND quantity described in RFC 793. tcpRtoMax 1.3.6.1.2.1.6.
tcpCurrEstab 1.3.6.1.2.1.6.9 2 tcpCurrEstab 1.3.6.1.2.1.6.9 The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. tcpInSegs 1.3.6.1.2.1.6.10 The total number of segments received, including those received in error. This count includes segments received on currently established connections. tcpOutSegs 1.3.6.1.2.1.6.11 The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
2 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 As an implementation-specific option, a RST segment might be sent from the managed node to the other TCP endpoint (note, however, that RST segments are not sent reliably). Values Possible values are: • • • • • • • • • • • • closed listen synSent (3) synReceived (4) established (5) finWait1 (6) finWait2 (7) closeWait (8) lastAck (9) closing (10) timeWait (11) deleteTCB (12) NOTE Fabric OS v3.1.x and v4.x do not allow the SET operation on this variable.
tcpOutRsts 1.3.6.1.2.1.6.15 2 tcpOutRsts 1.3.6.1.2.1.6.15 The number of TCP segments sent containing the RST flag. UDP group Implementation of the UDP group is mandatory for all systems that implement the UDP. udpInDatagrams 1.3.6.1.2.1.7.1 The total number of UDP datagrams delivered to UDP users. udpNoPorts 1.3.6.1.2.1.7.2 The total number of received UDP datagrams for which there was no application at the destination port. udpInErrors 1.3.6.1.2.1.7.
2 udpLocalPort 1.3.6.1.2.1.7.5.1.2 udpLocalPort 1.3.6.1.2.1.7.5.1.2 The local port number for this UDP listener. EGP group Brocade does not support the EGP group. This section is not applicable. Refer to the RFC1213 for complete information regarding the EGP group. Transmission group Brocade does not support the Transmission group. This section is not applicable. Refer to the RFC1213 for complete information regarding the Transmission group.
snmpInBadCommunityUses 1.3.6.1.2.1.11.5 2 snmpInBadCommunityUses 1.3.6.1.2.1.11.5 The total number of SNMP messages delivered to the SNMP protocol entity that represented an SNMP operation that was not allowed by the SNMP community named in the message. snmpInASNParseErrs 1.3.6.1.2.1.11.6 The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP messages. NOTE 1.3.6.1.2.1.11.7 is not supported. snmpInTooBigs 1.3.6.1.2.1.11.
2 snmpInTotalSetVars 1.3.6.1.2.1.11.14 snmpInTotalSetVars 1.3.6.1.2.1.11.14 The total number of MIB objects that have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. snmpInGetRequests 1.3.6.1.2.1.11.15 Status Mandatory The total number of SNMP Get-Request PDUs that have been accepted and processed by the SNMP protocol entity. snmpInGetNexts 1.3.6.1.2.1.11.
snmpOutBadValues 1.3.6.1.2.1.11.22 2 snmpOutBadValues 1.3.6.1.2.1.11.22 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “badValue.” NOTE 1.3.6.1.2.1.11.23 is not supported. snmpOutGenErrs 1.3.6.1.2.1.11.24 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “genErr.” snmpOutGetRequests 1.3.6.1.2.1.11.
2 snmpSilentDrops 1.3.6.1.2.1.11.31 • disabled (2) This object is stored in nonvolatile memory so that it remains constant between reinitializations of the switch. This value can be changed with the snmpconfig command. snmpSilentDrops 1.3.6.1.2.1.11.
etherStatsIndex 1.3.6.1.2.1.16.1.1.1.1 2 etherStatsIndex 1.3.6.1.2.1.16.1.1.1.1 The value of this object uniquely identifies this etherStats entry. etherStatsDataSource 1.3.6.1.2.1.16.1.1.1.2 This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any Ethernet interface on this device.
2 etherStatsCRCAlignErrors 1.3.6.1.2.1.16.1.1.1.8 etherStatsCRCAlignErrors 1.3.6.1.2.1.16.1.1.1.8 The total number of packets received that had a length (excluding framing bits, but including FCS octets) between 64 and 1518 octets, inclusive, but had one of the following errors: • FCS error: A bad Frame Check Sequence (FCS) with an integral number of octets. • Alignment error: A bad FCS with a non-integral number of octets. etherStatsUndersizePkts 1.3.6.1.2.1.16.1.1.1.
etherStatsPkts65to127Octets 1.3.6.1.2.1.16.1.1.1.15 2 etherStatsPkts65to127Octets 1.3.6.1.2.1.16.1.1.1.15 The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). etherStatsPkts128to255Octets 1.3.6.1.2.1.16.1.1.1.16 The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
2 alarmEntry 1.3.6.1.2.1.16.3.1.1 alarmEntry 1.3.6.1.2.1.16.3.1.1 A list of parameters that set up a periodic checking for alarm conditions. alarmIndex 1.3.6.1.2.1.16.3.1.1.1 An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device. alarmInterval 1.3.6.1.2.1.16.3.1.1.2 The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. alarmVariable 1.3.6.1.2.1.
alarmFallingThreshold 1.3.6.1.2.1.16.3.1.1.8 2 alarmFallingThreshold 1.3.6.1.2.1.16.3.1.1.8 A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. alarmRisingEventIndex 1.3.6.
2 eventDescription 1.3.6.1.2.1.16.9.1.1.2 eventDescription 1.3.6.1.2.1.16.9.1.1.2 A comment describing this event entry. eventType 1.3.6.1.2.1.16.9.1.1.3 The type of notification that the probe will make about this event. In the case of a log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations. eventCommunity 1.3.6.1.2.1.16.9.1.1.
logIndex 1.3.6.1.2.1.16.9.2.1.2 2 logIndex 1.3.6.1.2.1.16.9.2.1.2 An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. logTime 1.3.6.1.2.1.16.9.2.1.3 The value of sysUpTime when this log entry was created. logDescription 1.3.6.1.2.1.16.9.2.1.4 An implementation-dependent description of the event that activated this log entry. ifMIB group The ifMIB group is implemented in Fabric OS 5.3.0 and higher to support FCIP tunnels.
2 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. Not supported.
ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 2 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.
2 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
ifAlias 1.3.6.1.2.1.31.1.1.1.18 2 ifAlias 1.3.6.1.2.1.31.1.1.1.18 This object is an alias name for the interface as specified by a network manager, and provides a non-volatile handle for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string.
2 linkDown 1.3.6.1.6.3.1.1.5.3 linkDown 1.3.6.1.6.3.1.1.5.3 A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
authenticationFailure 1.3.6.1.6.3.1.1.5.5 2 NOTE authTraps must be enabled in the switch with the command: snmpconfig -set systemgroup.
2 70 authenticationFailure 1.3.6.1.6.3.1.1.5.
Chapter 3 FE MIB Objects In this chapter • FE MIB overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 • FIBRE-CHANNEL-FE-MIB (MIB-II branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 • fcFeConfig group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 • fcFeStatus group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 • fcFeError group . .
3 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 7 FE MIBs and supported Fabric OS versions Fabric OS version FIBRE-CHANNEL-FE-MIB (MIB-II branch) FCFABRIC-ELEMENT-MIB (experimental branch) v4.x Yes No v3.1.x Yes No v3.0.x Yes Yes v2.6.x No Yes FIBRE-CHANNEL-FE-MIB (MIB-II branch) This section contains descriptions and other information specific to FIBRE-CHANNEL-FE-MIB (in the MIB-II branch), including: • FIBRE-CHANNEL-FE-MIB organization . . . . . . . . . . . . . . . . . . . . . . . . . . .
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 3 FIBRE-CHANNEL-FE-MIB organization Figure 18 through Figure 23 depict the organization and structure of FIBRE-CHANNEL-FE-MIB.
3 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 - fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 - fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 - fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.3.
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 3 - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 - fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 - fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 - fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 - fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.
3 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 - fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 - fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 - fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 3 Definitions for FIBRE-CHANNEL-FE-MIB Table 8 lists the definitions for fcFeMIB. TABLE 8 FIBRE-CHANNEL-FE-MIB definitions Type definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
3 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 8 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Description Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
fcFeConfig group TABLE 8 3 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Description FcFeFxPortCapacity Integer from 1 to 448 Maximum number of Fx_Ports within a module. For the Brocade 300, this value is 24. For the Brocade 4100, this value is 32. For the Brocade 4900, this value is 64. For the Brocade 5000, this value is 32. For the Brocade 5100, this value is 40. For the Brocade 5300, this value is 80. For the Brocade 7500 or 7500E, this value is 32.
3 fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 Returns Displays the WWN of the switch. fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. Value The valid value for all Brocade switches is 1. fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 A table that contains information about the modules, one entry for each module in the fabric element. fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 An entry containing the configuration parameters of a module.
fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 Values 3 1 - online, module functioning properly 2 - offline, module not available 3 - testing, module in test mode 4 - faulty, module is defective fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 Contains the value of sysUpTime when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.
3 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 A table that contains configuration and service parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port. Index 1: fcFeModuleIndex 2: fcFxPortIndex fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 Identifies the Fx_Port within the module.
fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 3 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8” on page 83) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered. fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.
3 fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. The formula used to calculate this object is (RATOV - EDTOV - (2 * WAN_TOV)) / (MAX_HOPS + 1)) / 2).
fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 3 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 The desired operational mode of the Fx_Port. NOTE This object is read-only. It is listed incorrectly in the MIB definition as read-write. Fx_Port Physical Level Table This table contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.
3 fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 1: online (1) 2: offline (2) 3: testing (3) 4: linkFailure (4) The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 3 fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 The associated Nx_Port in the attachment for which the entry contains information. fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 The version of FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 The total number of buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames to be transmitted to the attached Nx_Port.
3 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Values Possible values are: • yes (1) The Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. • no (2) The Fx_Port has not agreed to support Class 3 sequential delivery from the fabric login.
fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 3 This table contains counters recording numbers of errors detected since the management agent reinitialized, one entry for each Fx_Port in the fabric element. The first six columnar objects after the port index correspond to the counters in the link error status block. fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 An entry containing error counters of a Fx_Port. Augments 1: fcFxPortEntry fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.
3 fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.11 The number of Offline Sequence errors received by this Fx_Port. fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.
fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 3 fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port. fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 The number of Class 1 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.
3 fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 A table that contains Class 2 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element. fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1 An entry containing Class 2 accounting information for each Fx_Port. Augments: 1: fcFxPortEntry fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.
fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 3 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 A table that contains Class 3 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element. fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 An entry containing Class 3 accounting information for each Fx_Port. Augments: 1: fcFxPortEntry fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.
3 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 A table that contains the capabilities of the port within the fabric element, one entry for each Fx_Port. fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 An entry containing the capabilities of a Fx_Port. Augments: 1: fcFxPortEntry fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 The highest or most recent version of FC-PH that the Fx_Port is capable of supporting. fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.
fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 3 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.
3 FCFABRIC-ELEMENT-MIB (experimental branch) NOTE Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects except “fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1”. The descriptions of each of the MIB variables in this chapter come directly from the FCFABRIC-ELEMENT-MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade.
FCFABRIC-ELEMENT-MIB (experimental branch) 3 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.
3 FCFABRIC-ELEMENT-MIB (experimental branch) - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 - fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 - fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 - fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 - fcFxPortAdminMode 1.3.6.1.3.42.2.
FCFABRIC-ELEMENT-MIB (experimental branch) 3 - fcFeAcct (-- Not Supported --) FIGURE 28 fcFeAcct hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 - fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 - fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 - fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 - fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.
3 FCFABRIC-ELEMENT-MIB (experimental branch) TABLE 9 FCFABRIC-ELEMENT-MIB definitions (Continued) Type definition Value Description FabricName FcNameId The name identifier of a fabric. Each fabric provides a unique fabric name. Only the following formats are allowed: IEEE48 Local FcPortName FcNameId The name identifier associated with a port.
fcFeConfig group TABLE 9 3 FCFABRIC-ELEMENT-MIB definitions (Continued) Type definition Value Description Fc0MediaCap Integer from 0 to 65535 bit 0 (unknown) bit 1 (single mode fibre (sm)) bit 2 (multimode fiber 50 micron (m5)) bit 3 (multimode fiber 62.
3 fcFabricName 1.3.6.1.3.42.2.1.1.1 Implementation of this group is mandatory. fcFabricName 1.3.6.1.3.42.2.1.1.1 The Name_Identifier of the fabric to which this fabric element belongs. Return Returns the WWN of the primary switch in the fabric. fcElementName 1.3.6.1.3.42.2.1.1.2 The Name_Identifier of the fabric element. Return Returns the WWN of the switch. fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 The maximum number of modules in the fabric element, regardless of their current state.
fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 3 fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to “sysDescr 1.3.6.1.2.1.1.1” on page 30. fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 The vendor’s authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.
3 Fx_Port Configuration Table Fx_Port Configuration Table This table contains, one entry for each Fx_Port, the configuration parameters of the ports. fcFxConfTable 1.3.6.1.3.42.2.1.1.5 A table that contains, one entry for each Fx_Port in the fabric element, configuration and service parameters of the Fx_Ports. fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port. Index FcFxConfModuleIndex, fcFxConfFxPortIndex fcFxConfModuleIndex 1.3.6.1.3.42.
fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 3 fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 The Resource_Allocation_Timeout Value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.
3 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port. Values Possible values are: • yes (1) • no (2) fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 A flag indicating whether Class 3 sequential delivery is supported by the Fx_Port. Values Possible values are: • yes (1) • no (2) fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.
fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 3 NOTE Implementation of this group is mandatory. fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 A table that contains one entry for each Fx_Port in the fabric element, operational status, and parameters of the Fx_Ports. fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 An entry containing operational status and parameters of an Fx_Port. Index fcFxPortOperModuleIndex, fcFxPortOperFxPortIndex fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.
3 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 The current operational mode of the Fx_Port. fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 The desired operational mode of the Fx_Port. fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.
fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 3 A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2).
3 fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1 Index fcFxloginModuleIndex, fcFxloginFxPortIndex, fcFxloginNxPortIndex fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1 Identifies the module containing the Fx_Port for which this entry contains information. fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module.
fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 3 • yes (1) • no (2) fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 Indicates whether the Fx_Port has agreed to support stacked connect from the fabric login. This is only meaningful if Class 1 service has been agreed to. fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 A variable indicating whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login.
3 fcFeError group fcFeError group This group consists of tables that contain information about the various types of errors detected. The management station might use the information in this group to determine the quality of the link between the Fx_Port and its attached Nx_Port. Implementation of this group is optional. fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.
fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 3 fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 The number of primitive sequence protocol errors detected by the Fx_Port. fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 The number of invalid transmission word errors detected by the Fx_Port. fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 The number of invalid Cyclic Redundancy Checks (CRCs) detected by this Fx_Port. fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.
3 fcFeCap group fcFeCap group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used or not, as expressed in its respective object value in the Configuration group. Implementation of this group is optional. fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 A table that contains one entry for each Fx_Port, and the capabilities of the port within the fabric element. fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.
fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 3 fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 The minimum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port. fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.7 The maximum size (in bytes) of the Data Field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.
3 fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 Values Possible values are: • yes (1) • no (2) fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting. fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 The minimum holding time (in microseconds) that the Fx_Port is capable of supporting. fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.16 A value indicating the set of baud rates that the Fx_Port is capable of supporting.
Chapter 4 Entity MIB Objects In this chapter • Entity MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Textual conventions for Entity MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Entity MIB objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Physical Entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Logical Entity group . . . . .
4 Entity MIB overview Entity MIB system organization of MIB objects Figure 30 through Figure 37 depict the organization and structure of the Entity MIB file system. - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 30 Overall tree structure for Entity MIB - entityPhysical - entPhysicalTable 1.3.6.1.2.1.47.1.1.
Entity MIB overview 4 - entityLogical - entLogicalTable 1.3.6.1.2.1.47.1.2.1 - entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 - entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 - entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 - entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 - entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 - entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 - entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 - entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 - entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.
4 Textual conventions for Entity MIB Definitions for Entity MIB Table 10 lists the objects or definitions that are imported into the Entity MIB and the modules from which they are imported.
SnmpEngineIdOrNone TABLE 11 4 Possible values for PhysicalClass Values Description other (1) The physical entity class is known but does not match any of the supported values. unknown (2) The physical entity class is unknown to the agent. chassis (3) The physical entity class is an overall container for networking equipment. Any class of physical entity except a stack can be contained within a chassis, and a chassis might be contained only within a stack.
4 Entity MIB objects • If the WWN cannot be taken, the snmpEngineID takes the IP address + port number along with the private enterprise number and algorithm type used. An example of this type of snmpEngineID would be 00.00.06.34.00.00.00.A1.0A.20.93.CA (hex) Syntax OCTET STRING (SIZE(0..32)) Empty string or SnmpEngineID Entity MIB objects The Entity MIB objects are divided into the following groups: • Physical Entity group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.
4 entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table. Index 1: entPhysicalIndex entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 The index for this entry. This object is not accessible. entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.
entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 4 An agent should set this object to the standard enumeration value that most accurately indicates the general class of the physical entity, or the primary class if there is more than one. If no appropriate standard registration identifier exists for this physical entity, then the value other (1) is returned. If the value is unknown by this agent, then the value unknown (2) is returned.
4 entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.
entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 4 Parent-relative ordering normally starts from 1 and continues to n, where n represents the highest-positioned child entity. However, if the physical entities (for example, slots) are labeled from a starting position of zero, then the first sibling should be associated with an entPhysicalParentRelPos value of 0. Note that this ordering might be sparse or dense, depending on agent implementation.
4 entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 If no specific firmware programs are associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string. Set to an empty string. entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 The vendor-specific software revision string for the physical entity.
entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 4 Note that comparisons between instances of the entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and the entPhysicalSerialNum objects are meaningful only amongst entPhysicalEntries with the same value of entPhysicalMfgName. If the manufacturer name string associated with the physical component is unknown to the agent, then this object contains a zero-length string. Set to empty string. entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.
4 entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 If write access is implemented for an instance of entPhysicalAssetID and a value is written into the instance, the agent must retain the supplied value in the entPhysicalAssetID instance associated with the same physical entity for as long as that entity remains instantiated.
entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 4 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 An indication of the type of logical entity. This is typically the Object Identifier name of the node in the SMI’s naming hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. • A logical entity of a regular host/router -> mib-2 • A logical entity of a 802.1d bridge -> dot1dBridge • A logical entity of a 802.
4 entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are currently found in the Transport Mappings for SNMPv2 document (RFC1906). entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.
entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 4 Suppose a bridge is realized on a particular module and all ports on that module are ports on this bridge. A mapping between the bridge and the module would be useful, but additional mappings between the bridge and each of the ports on that module would be redundant (since the entPhysicalContainedIn hierarchy can provide the same information).
4 entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 Index entPhysicalIndex entAliasLogicalIndexOrZero Not supported. entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 The value of this object identifies the logical entity that defines the naming scope for the associated instance of the entAliasMappingIdentifier object. If this object has a nonzero value, then it identifies the logical entity named by the same value of entLogicalIndex.
entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 4 Bridge ports are identified by examining the Bridge MIB and appropriate ifEntries associated with each dot1dBasePort and are thus not represented in this table. Not supported. entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 A table that exposes the container/containee relationships between physical entities. This table provides all the information found by constructing the virtual containment tree for a given entPhysicalTable, but in a more direct format.
4 Entity MIB trap Entity MIB trap Not supported. This section lists the entityMIBTrap objects. entConfigChange 1.3.6.1.2.1.47.2.0.1 An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange notification event in a given time interval (five seconds is the suggested default).
entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 4 3: entityGeneralGroup 4: entityNotificationsGroup Components 1. Type: Group Group: entityLogical2Group Description: Implementation of this group is not mandatory for agents which model all MIB object instances within a single naming scope. 2. Type: Group Group: entityMappingGroup Description: Implementation of the entPhysicalContainsTable is mandatory for all agents.
4 entityMappingGroup 1.3.6.1.2.1.47.3.2.3 5: entLogicalTDomain Status Deprecated entityMappingGroup 1.3.6.1.2.1.47.3.2.3 The collection of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers, for which a single agent provides management information. Objects 1: entLPPhysicalIndex 2: entAliasMappingIdentifier 3: entPhysicalChildIndex entityGeneralGroup 1.3.6.1.2.1.47.3.2.
entityLogical2Group 1.3.6.1.2.1.47.3.2.7 4 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 The collection of objects used to represent the list of logical entities, for which a single SNMP entity provides management information.
4 140 entityLogical2Group 1.3.6.1.2.1.47.3.2.
Chapter 5 SW-MIB Objects In this chapter • SW-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • sw Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • swSystem group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Flash administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • swFabric group. . .
5 SW-MIB overview SW-MIB system organization of MIB objects Figure 38 through Figure 54 depict the organization and structure of SW-MIB.
SW-MIB overview 5 - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 - swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 - swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 - swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 - swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
5 SW-MIB overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 - swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 - swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 - swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 - swNbIslState 1.3.6.1.4.1.
SW-MIB overview 5 - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 - swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 - swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 - swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
5 SW-MIB overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 - swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 - swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 - swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 - swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
SW-MIB overview 5 - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 - swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 - swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 - swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
5 SW-MIB overview - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.
SW-MIB overview 5 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 - swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 - swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 - swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 - swTrunkGrpNumber 1.3.6.1.4.1.
5 SW-MIB overview - swConnUnitPortStatExtentionTable - swConnUnitPortStatEntry 1.3.6.1.4.1.1588.2.1.1.1.27.1 - swConnUnitCRCWithBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.1 - swConnUnitZeroTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.2 - swConnUnitFLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.3 - swConnUnitNLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.4 - swConnUnitStopTenancyStarVation 1.3.6.1.4.1.1588.2.1.1.1.27.1.5 - swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1.27.1.6 - swConnUnitTransferConnection 1.3.6.1.4.1.1588.2.1.
SW-MIB overview TABLE 13 5 SW-MIB textual conventions (Continued) Type definition Value Description SwFwActs Integer Valid Fabric Watch actions: 0 swFwNoAction 1 swFwErrlog 2 swFwSnmptrap 3 swFwErrlogSnmptrap 4 swFwPortloglock 5 swFwErrlogPortloglock 6 swFwSnmptrapPortloglock 7 swFwErrlogSnmptrapPortloglock 8 swFwRn 9 swFwElRn 10 swFwStRn 11 swFwElStRn 12 swFwPlRn 13 swFwElPlRn 14 swFwStPlRn 15 swFwElStPlRn 16 swFwMailAlert 17 swFwMailAlertErrlog 18 swFwMailAlertSnmptrap 19 swFwMailAlertErrlogSnmpt
5 SW-MIB overview TABLE 13 SW-MIB textual conventions (Continued) Type definition Value Description SwFwClassesAreas Integer Index of Fabric Watch classes and areas where thresholds can be monitored: Environment class: 1 swFwEnvTemp 2 swFwEnvFan (Not supported) 3 swFwEnvPS (Not supported) SFP class: 4 swFwTransceiverTemp 5 swFwTransceiverRxp 6 swFwTransceiverTxp 7 swFwTransceiverCurrent 57 swFwTransceiverVoltage Port class: 8 swFwPortLink 9 swFwPortSync 10 swFwPortSignal 11 swFwPortPe 12 swFwPortWo
sw Traps TABLE 13 5 SW-MIB textual conventions (Continued) Type definition Value Description EportUtil and EportPktl are the mib defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. In the index swFwEnvTemp, Env refers to Environment class and Temp refers to the area Temperature.
5 sw Traps • • • • • swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8 swFabricReconfigTrap 1.3.6.1.4.1.1588.2.1.1.1.0.9 swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1.0.10 swExtTrap 1.3.6.1.4.1.1588.2.1.1.1.0.11 Refer to Table 14 for the eleven traps defined in the SW-MIB, when it occurs, and how to configure the trap, if possible. TABLE 14 SW-MIB traps Name Specific When Configure “swFault 1.3.6.1.4.1.1588.2.1.1.1.0.
swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 TABLE 14 5 SW-MIB traps (Continued) Name Specific When Configure “swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1.0.10” on page 160 10 The trap to be sent for tracking segmentation. Refer to the Fabric OS Command Reference and the snmpConfig command for more information. “swExtTrap 1.3.6.1.4.1.1588.2.1.1.1.0.11” on page 160 11 The trap adds the SSN binding to the traps if it is enabled.
5 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 (Obsoleted by swFabricWatchTrap) Enterprise Variables sw “swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3” “swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1” “swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2” “swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4” “swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE 5 A Fibre Channel Port changed its operational state. Port Index %d changed state to %d. Port Name: %s and SSN is #%s 1, 0, 2, 3 Informational 1 Operational swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 Enterprise Variables sw “swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1” “swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2” “swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3” “swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.
5 swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 “EportUtil and EportPktl are the mib defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500) While VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade.” “swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6” “swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7” “swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8” “swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9” “swSsn 1.3.6.1.4.
swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 5 • Successful log in • Switch configuration changes • Track changes on and off This trap gets sent when track-changes is set to ENABLED and is configured to send SNMP traps on track events. Use the trackchangesset command to enable the track changes feature and SNMP trap mode. swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 Enterprise Variables sw “swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” “swVfId 1.3.6.1.4.1.1588.2.1.
5 swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1.0.10 • • • • • • • • Two switches with the same domain ID have connected to one another. Two fabrics have joined. An E_Port has gone offline. A principal link has segmented from the fabric. Zone conflicts. Domain conflicts. Segmentation of the principal link between two switches. Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. swFabricSegmentTrap 1.3.6.1.4.1.
swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 5 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 The date and time when the system last booted. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 The date and time when the firmware was last loaded to the switch.
5 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 Thu Aug 17 15:16:09 2000 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 The date and time when the BootPROM was last updated. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 The current version of the firmware.
swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 5 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Values Possible values are: • • • • • • online (1) Set the switch to be accessible by an external FC port. offline (2) Set the switch to be inaccessible. testing (3) Set the switch to run the built-in test. faulty (4) Set the switch to a “soft” faulty condition.
5 Flash administration Flash administration The next six objects are related to firmware or configuration file management. Due to security restrictions, firmwaredownload and configuration file upload and download are not supported through SNMP. swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 The operational status of the flash. This OID cannot be used for either Firmwaredownload or Configdownload (cannot be set and isread-only). The value displayed is always "swCurrent (1)". swFlashDLAdmStatus 1.3.6.
swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 5 This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions. swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 The password to be used for FTP transfer of files in the download or upload operation.
5 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 Table of sensor entries. Table 15 lists the sensors on the Brocade switches.
swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 TABLE 15 5 Sensors on the various Brocade switches (Continued) Platform Temp Fans Power supply swNumSensors / connUnitNumSensors Brocade 48000 10 sensors 3 fans 4 PS 17 Brocade DCX 16+ sensors 3 fans 4 PS 23+ Brocade DCX-4S 16+ sensors 3 fans 4 PS 23+ Brocade 8000 4 sensors 3 FRUs 2 PS 9 Brocade 8500 3 sensors 2 fans 2 PS 7 The sensors on the switches vary based on the blades. So for the exact count, refer to the Table 16.
5 swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 The type of sensor. swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 The current status of the sensor. Values Possible values are: • • • • • • 1: unknown (1) 2: faulty (2) 3: below-min (3) The sensor value is below the minimal threshold. 4: nominal (4) 5: above-max (5) The sensor value is above the maximum threshold. 6: absent (6) The sensor is missing.
swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 • • • • • • 5 Successful log in Unsuccessful log in Logout Configuration file change from task [name of task] Track-changes on Track-changes off swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 With VF enabled fabric, the number of switches will be 0 to 128. swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 Supported in Fabric OS v6.2.0 and later releases. The IP address of the Ethernet interface of this switch. swEtherIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.
5 swTestString 1.3.6.1.4.1.1588.2.1.1.1.1.32 swTestString 1.3.6.1.4.1.1588.2.1.1.1.1.32 Presence of this string represents test trap. swFabric group swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state. swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 Indicates whether the switch is the principal switch. Values Possible values are: • yes (1) • no (2) swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.
swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 5 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW. swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 This is the port index on the other end of the ISL. The physical port number of the remote switch, plus 1.
5 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8 The WWN of the remote port. swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 This table contains information on the member switches of a fabric. Supported in Fabric OS v2.6.1 and not v3.2.0. This is not available in v6.2.0 and later releases. swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.11 This identifies the status of Insistent Domain ID (IDID) mode. Status indicating if IDID mode is enabled or not.
SW Agent Configuration group 5 SW Agent Configuration group swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.11 A table that contains, one entry for each community, the access control and parameters of the community. The table displays all of the community strings (read and write) if it is accessed by the “write” community string. Only “read” community strings are displayed if it is accessed by the “read” community string. In Secure Fabric OS, the community strings can only be modified on the primary switch.
5 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string. Any or all of the trap recipients can be configured to send a trap for the associated community string. The maximum number of trap recipients that can be configured is six.
swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 Brocade Encryption Switch 32 ports Brocade DCX 576 ports Brocade DCX-4S 288 ports Brocade 48000 384 ports 5 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 A table that contains one entry for each switch port, configuration and service parameters of the port. swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 An entry containing the configuration and service parameters of the switch port. Index swFCPortIndex swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
5 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 Values Possible values are: • noCard (1) No card is present in this switch slot. • noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on). • • • • • • • • • • laserFault (3) The module is signaling a laser fault (defective GBIC). noLight (4) The module is not receiving light. noSync (5) The module is receiving light but is out of sync. inSync (6) The module is receiving light and is in sync.
swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 5 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Values Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop). • disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports.
5 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 Counts the number of Class 2 frames that the port has received. swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 Counts the number of Class 3 frames that the port has received. swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 Counts the number of link control frames that the port has received. swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 5 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 Counts the number of encoding error or disparity error outside frames received. swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 Counts the number of invalid ordered sets received. swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 Counts the number of Class 3 frames that the port has discarded. swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
5 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 This string indicates the physical port number of the addressed port.
Name Server Database group 5 Name Server Database group swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 The number of local Name Server entries. swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 The table of local Name Server entries. swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 An entry from the local Name Server database. Index swNsEntryIndex swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 The index of the Name Server database entry. swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
5 swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 The Fibre Channel WWN of the associated node, as defined in FC-GS-2. swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 The contents of a Symbolic Name of the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its contents.
swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 5 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 The FC-4s supported by the port, as defined in FC-GS-2. swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 The object identifies IpAddress of the Nx_Port for the entry. swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 The object identifies the World Wide Name (WWN) of the Fx_Port for the entry. swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 The object identifies the 24-bit hard address of the node for the entry.
5 swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 Only external RASlog messages are supported. These external messages are documented in the Fabric OS Message Reference. swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 An entry of the event table. Index swEventIndex swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 Every RASLOG message is identified with a unique number which is swEventIndex. swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 The date and time that this event occurred.
swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 5 swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 A textual description of the event. For Fabric OS v6.2.0 and later releases, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text. Previously this field used the task ID, and all the message number and message text. For more information on error messages, refer to the Fabric OS Message Reference. swEventVfid 1.3.6.1.4.1.1588.2.1.
5 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 This applies or cancels the configuration value changes. For a read operation, the return value is always swFwCancelWrite.
swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 5 C = environment (class), temperature (area). RPM = environment (class), fan (area). swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 A customizable polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area). swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10 A customizable low-threshold value for a Fabric Watch classArea combination. swFwCustHigh 1.3.6.1.4.
5 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 This applies or cancels the alarm value changes. For a read operation, the return value is always swFwCancelWrite. The following are the custom alarm variables that can be modified: swFwCustChangedActs swFwCustExceededActs swFwCustBelowActs swFwCustAboveActs swFwCustInBetweenActs Changes to these custom alarm variables can be saved by setting this variable to swFwApplyWrite.
swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 5 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 Custom action matrix for an exceeded event. swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 Custom action matrix for below event. swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 Custom action matrix for above event. swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 Custom action matrix for in-between event. swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
5 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 The table of individual thresholds. swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 An entry of an individual threshold. Index swFwClassAreaIndex, swFwThresholdIndex swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1).
swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 5 swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 Indicates whether a threshold is enabled or disabled. swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 Name of the threshold. For examples of swFwName objects and object types, refer to Table 17.
5 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.
swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.
5 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4 Brocade 5460 Brocade 5410 Brocade 5480 Brocade 5470 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4 Label of the threshold. Refer to “swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3” on page 191. swFwCurVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5 Current counter of the threshold. swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6 Last event type of the threshold. swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 Last event value of the threshold. swFwLastEventTime 1.3.6.
End Device group 5 End Device group swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 The table of RLS for individual end devices. swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 An entry of an individual end devices' RLS. Index swEndDevicePort, swEndDeviceAlpa Since Brocade switches start with port # 0, the SNMP port # should be physical port # plus 1. In turn, that means that SNMP port # 3 translates to port # 2. swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.
5 swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 Protocol error count for the end device. swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 Invalid word count for the end device. swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Invalid CRC count for the end device. Switch group Not supported. swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 The table of groups. This is not available on all versions of Fabric OS. swGroupEntry 1.3.6.
swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 5 swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 An entry for a member of a group. Index swGroupID, swGroupMemWwn swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 This object identifies the Group ID of the member switch. swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 This object identifies the WWN of the member switch. swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.
5 swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3 swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3 This object identifies the AL_PA values. These values range between x'01' and x'EF' (1 to 239). AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then it will have -1 value. swBlmPerfAlpaCRCCnt 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4 Get CRC count for given AL_PA and port.
swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 5 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 Get end-to-end count of Fibre Channel words (FCW) transmitted by the port that matched the SID-DID pair. swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6 Gets DID information by reference number. swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7 Gets SID information by reference number.
5 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 Alias name for the filter. Trunking group swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 Whether the switch supports the trunking feature or not: no (0) or yes (8). swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 Displays trunking information for the switch. For the Brocade 4100, cc ports per trunk are supported. swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 Entry for the trunking table.
swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 5 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 Displays trunking performance information for the switch. swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 Entry for the trunking group table. Index swTrunkGrpNumber swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 This object is a logical entity that specifies the group number to which port belongs. swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 This object gives the master port ID for the trunk group.
5 swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 This object provides the number of toptalking flows that are existing in the switch. swTopTalkerMntTable 1.3.6.1.4.1.1588.2.1.1.1.25.3 Table to display toptalking flows. swTopTalkerMntEntry 1.3.6.1.4.1.1588.2.1.1.1.25.3.1 Entry for the toptalking flows. swTopTalkerMntIndex 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1 This object identifies the list/object entry.
CPU or memory usage group 5 CPU or memory usage group The memory usage of a system indicates the system's RAM. swCpuUsage 1.3.6.1.4.1.1588.2.1.1.1.26.1 The system's CPU usage. swCpuNoOfRetries 1.3.6.1.4.1.1588.2.1.1.1.26.2 The number of times the system should take a CPU utilization sample before sending the CPU utilization trap. swCpuUsageLimit 1.3.6.1.4.1.1588.2.1.1.1.26.3 The CPU usage limit. swCpuPollingInterval 1.3.6.1.4.1.1588.2.1.1.1.26.
5 swMemAction 1.3.6.1.4.1.1588.2.1.1.1.26.10 swMemAction 1.3.6.1.4.1.1588.2.1.1.1.26.10 The action to be taken if the memory usage exceed the specified threshold limit. swMemUsageLimit1 1.3.6.1.4.1.1588.2.1.1.1.26.11 This OID specifies the low threshold value. swMemUsageLimit3 1.3.6.1.4.1.1588.2.1.1.1.26.12 This OID specifies the high threshold value. swConnUnitPortStatExtentionTable This table is an extension of connectivity unit port statistics table.
swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1.27.1.6 5 swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1.27.1.6 The number of times FC port entered OPENED state. swConnUnitTransferConnection 1.3.6.1.4.1.1588.2.1.1.1.27.1.7 The number of times FC port entered TRANSFER state. swConnUnitOpen 1.3.6.1.4.1.1588.2.1.1.1.27.1.8 The number of times FC port entered OPEN state. swConnUnitInvalidARB 1.3.6.1.4.1.1588.2.1.1.1.27.1.9 The number of times FC port received invalid ARB. swConnUnitFTB1Miss 1.3.6.1.4.1.1588.2.1.1.1.27.
5 swConnUnitBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.15 swConnUnitBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.15 The number of frames with bad EOF. swConnUnitLCRX 1.3.6.1.4.1.1588.2.1.1.1.27.1.16 The number of link control frames received. swConnUnitRDYPriority 1.3.6.1.4.1.1588.2.1.1.1.27.1.17 The number of times that sending R_RDY or VC_RDY primitive signals was a higher priority than sending frames, due to diminishing credit reserves in the transmitter at the other end of the fibre. swConnUnitLli 1.3.6.1.4.1.
Chapter 6 High-Availability MIB Objects In this chapter • HA-MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • High-Availability group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU History Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 HA-MIB overview - haMIB (1.3.6.1.4.1.1588.2.1.2) - highAvailability (1.3.6.1.4.1.1588.2.1.2.1) - haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 - fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 - fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 - fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.
High-Availability group TABLE 18 6 Objects imported into the HA-MIB (Continued) Object Imported from this module DisplayString SNMPv2-TC TimeStamp High-Availability group This section describes the MIB objects in the High-Availability group. haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 Indicates whether the system is redundant. Values Possible values are: • redundant (0) Dual CP with standby CP ready to take over.
6 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.
fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 6 fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 The current status of the FRU object in the slot. Values Possible values are: • • • • • other (1) unknown (2) on (3) off (4) faulty (5) fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 The slot number of the blade, and the unit number for everything else. fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 The supplier ID. fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 The supplier part number. fruSupplierSerialNum 1.3.6.1.
6 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 Index of the FRU event in the history table. fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 The type of the FRU object related to the event. Values Possible values are: • • • • • • • • • • • other (1) unknown (2) chassis (3) cp (4) other-CP (5) switchblade (6) wwn (7) powerSupply (8) fan (9) CoreBlade (10) ApplicationBlade (11) fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.
fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 6 fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 The Brocade serial number of the FRU object. CP Table cpTable 1.3.6.1.4.1.1588.2.1.2.1.7 This table lists all the CPs in the system. cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 An entry represents a single CP in the system. Index entPhysicalIndex cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
6 HA-MIB traps Values Possible values are: • • • • • • • • • • • • other (1) unknown (2) haSync (3) haOutSync (4) cpFaulty (5) cpHealthy (6) cpActive (7) configChange (8) failOverStart (9) failOverDone (10) firmwareCommit (11) firmwareUpgrade (12) HA-MIB traps This section lists the HA-MIB traps. fruStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.
fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 • • • • 6 Reboot firmwareDownload fastboot HA failover fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 Objects 1: fruHistoryClass 2: fruHistoryObjectNum 3: fruHistoryEvent 4: fruHistoryTime 5: fruHistoryFactoryPartNum 6: fruHistoryFactorySerialNum Status Current This trap is generated when a FRU is added, removed, or failed. HA-MIB traps and sample triggers Table 20 lists the HA-MIB traps and sample events that will trigger them.
6 216 fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.
Chapter 7 FICON MIB Objects In this chapter • FICON MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • ficonRNID group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • ficonLIRR group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • ficonRLIR group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 FICON MIB overview - iso - org - dod - internet - private - enterprises - bsci - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 57 Overall tree structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 - nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 - nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 - nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
FICON MIB overview 7 - LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 - LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 - LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 - LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 - LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 - ficonRLIR - rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 - rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 - rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 - rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 - rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.
7 FICON MIB overview TABLE 21 220 FICON MIB textual conventions (Continued) Name Status Description Syntax RLIRLinkFailureType Current Represents the link failure type. INTEGER { bitErrorRate(2), lossOfSignal(3), nOSRecognized(4), primitiveSequenceTimeout(5), invalidSeqForPortState(6), loopInitializationTimeout(7), lossOfSignalInLoopInit(8) } RNIDManufacturer Current Represents the Manufacturer name or code.
ficonRNID group 7 ficonRNID group This group contains all Request Node Identification Data (RNID) group objects for FICON. nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 The number of entries in Request Node Identification Data (RNID) table. Refer to the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 A table that contains one entry for each FICON RNID node attached to a switch. nodeRNIDEntry 1.3.6.
7 nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 Model number of the RNID node. nodeRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7 Identifies the manufacturer of the node. nodeRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 Identifies the manufacturer plant of the node. nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 Identifies the sequence number of the node. nodeRNIDConnectedPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
switchRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.4 7 switchRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.4 A table that contains RNID information for each switch FICON node. switchRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.4.1 An entry containing the RNID information for the switch FICON node. switchRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1 Index into switchRNIDTable. switchRNIDSwitchWWN 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 WWN of the switch. switchRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3 RNID flags for the switch.
7 switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 Identifies the parameters of the switch. nodeVfId 1.3.6.1.4.1.1588.2.1.1.50.2.5 The Virtual Fabric ID of the switch. For VF-unaware switches, this value will be 0. ficonLIRR group This group contains all Link Incident Record Registration (LIRR) group objects for FICON. LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 The number of entries in an LIRR table.
LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 7 LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 Protocol type supported. LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 Attached port type. LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 Registration type: conditional or unconditional. ficonRLIR group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 The number of entries in a switch RLIR table.
7 rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 RLIR Incident port type. rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 RLIR Incident PID. rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 RLIR Incident port number. This is a vendor-specific port number. rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 RLIR Connected port WWN. rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 RLIR Connected node WWN. rLIRFabricWwn 1.
linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 7 linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 A device registered with the switch. Objects 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 A device deregistered with the switch. Objects 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.
7 linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.
Chapter 8 FibreAlliance MIB Objects In this chapter • FibreAlliance MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • ConnSet group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Statistics group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Service group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 FibreAlliance MIB overview - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + connUnitEventTable 1.3.6.1.3.94.1.11 + connUnitLinkTable 1.3.6.1.3.94.1.12 - trapReg - trapMaxClients 1.3.6.1.3.94.2.1 - trapClientCount 1.3.6.1.3.94.2.2 + trapRegTable 1.3.6.1.3.94.2.3 - revisionNumber 1.3.6.1.3.
FibreAlliance MIB overview 8 - connUnitTable 1.3.6.1.3.94.1.6 - connUnitEntry 1.3.6.1.3.94.1.6.1 - connUnitId 1.3.6.1.3.94.1.6.1.1 - connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 - connUnitType 1.3.6.1.3.94.1.6.1.3 - connUnitNumports 1.3.6.1.3.94.1.6.1.4 - connUnitState 1.3.6.1.3.94.1.6.1.5 - connUnitStatus 1.3.6.1.3.94.1.6.1.6 - connUnitProduct 1.3.6.1.3.94.1.6.1.7 - connUnitSn 1.3.6.1.3.94.1.6.1.8 - connUnitUpTime 1.3.6.1.3.94.1.6.1.9 - connUnitUrl 1.3.6.1.3.94.1.6.1.10 - connUnitDomainId 1.3.6.1.3.94.1.6.1.
8 FibreAlliance MIB overview - connUnitPortTable 1.3.6.1.3.94.1.10 - connUnitPortEntry 1.3.6.1.3.94.1.10.1 - connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 - connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 - connUnitPortType 1.3.6.1.3.94.1.10.1.3 - connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 - connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 - connUnitPortState 1.3.6.1.3.94.1.10.1.6 - connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 - connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 - connUnitPortModuleType 1.3.6.1.3.94.1.10.1.
FibreAlliance MIB overview 8 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 - connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 - connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 - connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 - connUnitLinkAgentAddressY 1.3.6.1.3.94.1.
8 FibreAlliance MIB overview - connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 - connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 - connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 - connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 - connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 - connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 - connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 - connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 - connUnitPortStatCountBBCreditZero 1.
FibreAlliance MIB overview 8 - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 69 ConnUnitServiceScalars hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 - connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 - connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 - connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 - connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.
8 ConnSet group TABLE 22 Definitions for FCMGMT-MIB (Continued) Type definition Value Description FcEventSeverity Integer 1 (unknown) 2 (emergency) Emergency status. 3 (alert) Alert status. 4 (critical) Critical status. 5 (error) Error status. 6 (warning) Warning status. 7 (notify) Notification status. 8 (info) Informational status. 9 (debug) Debug status. 10 (mark) All messages logged. FcUnitType Integer 1 (unknown) 2 (other) None of 3–14.
connUnitTable 1.3.6.1.3.94.1.6 8 USER Replace with username PASSWORD Replace with password GLOBALID Replace with global ID SERIALNO Replace with serial number The expected value for system URL.0 is: http://{a.b.c.d} where {a.b.c.d} is the IP address of the switch if a Web Tools license is available. “” (null) where “” is used when a Web Tools license is not available. connUnitTable 1.3.6.1.3.94.1.6 A list of units under a single SNMP agent. The number of entries is given by the value of uNumber.
8 connUnitType 1.3.6.1.3.94.1.6.1.3 When a non-zero value is provided, the following characteristics are strongly recommended. • It should be persistent across agent and unit resets. • It should be globally unique. • It should be one of these FC-PH/PH3 formats: - IEEE (NAA=1) - IEEE Extended (NAA=2) - IEEE Registered (NAA=5) - IEEE Registered extended (NAA=6) Use of the IEEE formats allows any IEEE-registered vendor to assure global uniqueness independently.
connUnitState 1.3.6.1.3.94.1.6.1.5 8 NOTE The ConnUnitNumports will not count the GE ports present on FC4-16IP blade. The maximum number of supported ports are as follows.
8 connUnitProduct 1.3.6.1.3.94.1.6.1.7 • ok (3) - Healthy/ok • warning (4) - Marginal/Warning • failed (5) - Down/Failed connUnitProduct 1.3.6.1.3.94.1.6.1.7 The connectivity unit vendor's product model name. This is the same as for sysDescr (set for as many as 79 bytes). If the switch is in Access Gateway mode, the default value is Access Gateway. connUnitSn 1.3.6.1.3.94.1.6.1.8 The serial number for this connectivity unit. Set to the SSN (which by default is the WWN). connUnitUpTime 1.3.6.1.3.94.1.6.
connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 Values 8 Possible values are: • unknown (1) • no (2) • yes (3) This could be the only unit with a management card in it for a set of units. A standalone unit should return “yes” for this object. Set to 3 (yes). connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, it returns “unknown.
8 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 The number of revisions in connUnitRevsTable. Set to 2. connUnitNumZones 1.3.6.1.3.94.1.6.1.18 Number of zones defined in connUnitZoneTable. Not supported. connUnitModuleId 1.3.6.1.3.94.1.6.1.19 This is a unique ID, persistent between boots, that can be used to group a set of connUnits together into a module.
connUnitContact 1.3.6.1.3.94.1.6.1.23 8 onlineConnUnit = enable switch default after reboot = unknown The declaration 1 (unknown) maps to the default value upon rebooting, and 2 (invalid) is not applicable. Declarations 3 and 4 perform the same operation—a cold boot of the switch. Values Possible values are: • • • • • unknown (1) invalid (2) resetConnUnitColdStart (3): Reboot. Performs a switch reboot. resetConnUnitWarmStart (4): Fastboot. The addressed unit performs a Warm Start reset.
8 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 For Fabric OS v4.4, and later releases, this value ranges from 0 to 1024. connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 Maximum number of events that can be defined in connUnitEventTable. Values This value ranges from 0 to 1024. connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 The last-used event ID (connUnitEventId). Every RASLOG message has RASLOG number and this represents the RASLOG number. Maximum is 2147483647 (231-1). connUnitRevsTable 1.3.6.1.3.94.1.
connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 8 Index 1 returns the switchType from switchShow. Index 2 returns the Fabric OS version from telnet command version: for example, v2.6. connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 Description of a component to which the revision corresponds. Index 1 returns the hardware version. Index 2 returns the software version. connUnitSensorTable 1.3.6.1.3.94.1.8 Table of the sensors supported by each connectivity unit managed by this agent.
8 connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 • Warning (4) The sensor indicates a warning. • failed (5) The sensor indicates failure. • Nominal = 3 (ok). connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 Miscellaneous static information about the sensor, such as its serial number. Each contains textual information about the sensor. Return Returns the serial ID if this is for the power supply; otherwise, returns Null. connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 This describes the status of the sensor as a message.
connUnitPortTable 1.3.6.1.3.94.1.10 Values swSensorType connUnitSensorCharacteristic 1 (temperature) 2 (fan) 3 (power supply) 3 (temperature) 7 (airflow) 9 (power) 8 Possible values are: • • • • • • • • • • unknown (1) other (2) temperature (3) pressure (4) emf (5) currentValue (6) Current is a keyword. airflow (7) frequency (8) power (9) door (10) Not supported in Fabric OS v2.6.1. connUnitPortTable 1.3.6.1.3.94.1.
8 connUnitPortType 1.3.6.1.3.94.1.10.1.3 The Brocade switches support 0 to maximum number of system supported ports.
connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 • • • • 8 wan (16) ac (17) AC power line. (Not supported in Fabric OS v2.6.1.) dc (18) DC power line. (Not supported in Fabric OS v2.6.1.) ssa (19) Serial storage architecture. (Not supported in Fabric OS v2.6.1.) connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to 0.
8 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 • • • • • unavailable (1) Do not use. online (2) Available for meaningful work. offline (3) Not available for meaningful work. bypassed (4) No longer used. diagnostics (5) Map to your testing. (Not supported in Fabric OS v2.6.1.) For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing, faulted). connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 An overall protocol status for the port.
connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 • • • • 8 longwaveNoOFC (8) shortwaveNoOFC (9) longwaveLED (10) ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper). connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 The module type of the port connector.
8 connUnitPortSn 1.3.6.1.3.94.1.10.1.12 The FC ID is formatted “DD AA PP” (e.g., “02 00 02”). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a different AA value for each link. The Brocade Access Gateway “PP” is the port number for F_Ports and is always zero for N_Ports. Therefore the N_Port FC ID always appears as “DD AA 00” (e.g., “02 00 00”).
connUnitPortControl 1.3.6.1.3.94.1.10.1.16 8 • bypassConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific “bypass” operation. Examples of these operations are: • Transitioning from online to offline. • A request (NON-PARTICIPATING) command to the loop port state machine. • Removal of the port from an arbitrated loop by a hub.
8 connUnitPortName 1.3.6.1.3.94.1.10.1.17 • Return values are: - resetConnUnitPort portDisable (F or E_Port, loop for U_Port) - bypassConnUnitPort portDisable (FL_Port) - unbypassConnUnitPort portEnable (FL_Port) - offlineConnUnitPort portDisable (E, F, FL_Port) - onlineConnUnitPort portEnable (U) - resetConnUnitPortCounters clear the port statistics counter. When rebooted, this defaults to 1 (unknown). connUnitPortName 1.3.6.1.3.94.1.10.1.17 A string describing the addressed port.
connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 8 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 This OID is deprecated. This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object.
8 connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity. All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN. This is in IEEE Extended format and the extension contains the internal port number of each port. The internal port number is 1 less than the port index.
connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 Index 8 connUnitEventUnitId connUnitEventIndex connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 The connUnitId of the connectivity unit that contains this event table. Same as connUnitId. connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 Each connectivity unit has its own event buffer. As it wraps, it might write over previous events. This object is an index into the buffer. It is recommended that this table is read using “getNext”s to retrieve the initial table.
8 connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string. connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 This is the sysuptime time stamp when the event occurred. connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 The event severity level.
connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 8 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 The description of the event. Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. For Fabric OS v6.2.0 and later releases, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text. Previously, this field used the task ID and all the message number and message text.
8 connUnitLinkEntry 1.3.6.1.3.94.1.12.1 A Brocade Access Gateway has no ISLs (InterSwitch Links); therefore all F_Port and N_Port connections display in ag --show for online F_Ports. Dedicated ISL DISL Extended ISL XISL Logical ISL LISL An ISL physically connected between two virtual switches belonging to same VF ID. A DISL is dedicated to carry frames only related to VF ID of connected virtual switches.
connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 8 connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of binary 0. This is the WWN of the port to which the device is connected. connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID.
8 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. ISL- IP port. Device- 0 (Null). connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 Type of the FC connectivity unit, as defined in connUnitType. • ISL- Switch device. • End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. Table 23 display the types of the connectivity unit.
connUnitPortStatTable 1.3.6.1.3.94.4.5 8 The high order bit is reserved to indicate whether the object is supported. All objects start at a value of 0 at hardware initialization and continue incrementing until end of 63 bits and then wrap to 0. This is the case for all Class 1 Frames; Brocade does not support them. connUnitPortStatTable 1.3.6.1.3.94.4.5 A list of statistics for the fabric port types. connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 An entry describing port statistics.
8 connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 The number of octets or bytes that have been transmitted by this port. There is an one-second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 The number of octets or bytes that have been received by this port. There is an one-second periodic polling of the port.
connUnitPortStatCountFRJTFrames 1.3.6.1.3.94.4.5.1.12 8 connUnitPortStatCountFRJTFrames 1.3.6.1.3.94.4.5.1.12 Not supported. The number of times that FRJT was returned to this port as a result of a frame that was rejected by the fabric. This is the total for all classes and is a Fibre Channel only statistic. connUnitPortStatCountPRJTFrames 1.3.6.1.3.94.4.5.1.13 Not supported. The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port.
8 connUnitPortStatCountClass1FRJTFrames 1.3.6.1.3.94.4.5.1.18 The number of times that PBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames. Return value- 800000000 connUnitPortStatCountClass1FRJTFrames 1.3.6.1.3.94.4.5.1.
connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 8 The number of times that FBSY was returned to this port because Class 2 Frame that could not be delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). NOTE This is a Fibre Channel only statistic. Return value- 800000000 connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.
8 connUnitPortStatCountClass3TxFrames 1.3.6.1.3.94.4.5.1.27 NOTE This is a Fibre Channel only statistic. connUnitPortStatCountClass3TxFrames 1.3.6.1.3.94.4.5.1.27 Not supported. The number of Class 3 Frames transmitted out this port. Return value- 800000000 NOTE This is a Fibre Channel only statistic. connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.28 The number of Class 3 Frames that were discarded upon reception at this port. There is no FBSY or FRJT generated for Class 3 Frames.
connUnitPortStatCountRxLinkResets 1.3.6.1.3.94.4.5.1.33 8 connUnitPortStatCountRxLinkResets 1.3.6.1.3.94.4.5.1.33 The number of link resets received. NOTE This is a Fibre Channel only statistic. connUnitPortStatCountTxLinkResets 1.3.6.1.3.94.4.5.1.34 The number of link resets transmitted. NOTE This is a Fibre Channel only statistic. connUnitPortStatCountNumberLinkResets 1.3.6.1.3.94.4.5.1.35 Not supported. The number of link resets and LIPs detected at this port.
8 connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 The number of link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) NOTE This is a Fibre Channel only statistic. connUnitPortStatCountInvalidCRC 1.3.6.1.3.94.4.5.1.40 The number of frames received with invalid CRC. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) Loop ports should not count CRC errors passing through when monitoring.
connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 8 connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). NOTE This is a Fibre Channel only statistic. connUnitPortStatCountFramesTooLong 1.3.6.1.3.94.4.5.1.46 The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI.
8 connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 Implementation of the Connectivity Unit Service Scalers group is mandatory for all systems. connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 The maximum number of entries in the table. connUnitSnsTable 1.3.6.1.3.94.5.2.1 This table contains an entry for each object registered with this port in the switch. Implementation of the Connectivity Unit Service Tables group is mandatory for all systems.
connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 8 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 The node name for this entry in the SNS table. connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 The Classes of Service offered by this entry in the SNS table. connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.1.7 The IPv6 formatted address of the Node for this entry in the SNS table. connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 The process associator for this entry in the SNS table. Hard coded to FF. connUnitSnsFC4Type 1.3.6.
8 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 The symbolic node name of this entry in the SNS table. If the attached device has only the symbolicNodename, the symbolicNodename is shown and the symbolicPortname appears as "null". SNMP Trap Registration group trapMaxClients 1.3.6.1.3.94.2.1 The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. trapClientCount 1.3.6.1.3.94.2.
trapRegFilter 1.3.6.1.3.94.2.3.1.3 8 trapRegFilter 1.3.6.1.3.94.2.3.1.3 This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is Warning.
8 Unsupported tables 0 = High order major revision number 1 = Low order major revision number 2 = High order minor revision number 3 = Low order minor revision number The value is stored as an ASCII value. The following is the current value of this object. 0=0 1=3 2=0 3=0 This defines a revision of 03.00. Set to 0300. Unsupported tables The Connectivity Unit Port Statistics Fabric Table (connUnitPortStatTable) is supported in v6.0, v5.x, and v2.6.1.
connUnitEventTrap Variables 8 connUnitId A connUnit has been deleted from this agent. Recommended severity level (for filtering)- warning. Not implemented. connUnitEventTrap Enterprise Variables fcmgmt connUnitEventId, connUnitEventType, connUnitEventObject, connUnitEventDescr An event has been generated by the connectivity unit. Recommended severity level (for filtering)- info. Sample trap output for Fabric OS v6.1.0. connUnitEventId.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.
8 connUnitPortStatusChange Sample trap output for Fabric OS v6.1.0. connUnitPortStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = ready(3) connUnitPortState.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = online(2) connUnitPortName.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = test Refer to the swFCportSCN for more information.
Chapter 9 FCIP MIB Objects In this chapter • FCIP MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcipEntityInstanceTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcipLinkTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcipTcpConnTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 FCIP MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 + fcipTcpConnTable .6 FIGURE 71 High level organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.3 fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.
fcipEntityInstanceTable 9 - fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.3 fcipExtendedLinkCompressionRatio 1.3.6.1.4.1.1588.4.1.1.4 fcipExtendedLinkTcpSmoothedRTT 1.3.6.1.4.1.1588.4.1.1.5 fcipExtendedLinkRawBytes 1.3.6.1.4.1.1588.4.1.1.6 fcipExtendedLinkCompressedBytes 1.3.6.1.4.1.1588.4.1.1.7 fcipExtendedLinkConnectedCount 1.3.6.1.4.1.1588.4.
9 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 • fcipEntityStatus 1.3.6.1.2.1.224.1.1.4.1.8 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 The FCIP entity indentifier. fcipEntityName 1.3.6.1.2.1.224.1.1.4.1.2 An administratively assigned name for the FCIP entity. Example for Brocade 7500 or FR4-18i router blade: • ipif 0 in FCIP GbE port 0/ge0 Example for Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade: • Circuit 0 in FCIP VE port 12 fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.
fcipEntityStatus 1.3.6.1.2.1.224.1.1.4.1.8 9 fcipEntityStatus 1.3.6.1.2.1.224.1.1.4.1.8 This object specifies the operational status of the row. This object will support “read-only” access and the status will be “active” for all entries. fcipLinkTable This table contains information about FCIP links that exist on this device. There is an entry for each FCIP tunnel.
9 fcipLinkLocalFcipEntityMode 1.3.6.1.2.1.224.1.1.5.1.4 fcipLinkLocalFcipEntityMode 1.3.6.1.2.1.224.1.1.5.1.4 The mode of the local end of the FCIP link. fcipLinkLocalFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.5 The type of Internet address contained in the corresponding instance of fcipLinkLocalFcipEntityAddress. Only address types IPv4 and IPv6 are supported. fcipLinkLocalFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.6 The Internet address for the local end of this FCIP Link.
fcipTcpConnTable 9 fcipTcpConnTable This table contains information about existing TCP connections. Each FCIP link within an FCIP entity manages one or more TCP connections. The FCIP entity employs a Data Engine for each TCP connection for handling FC frame encapsulation, de-encapsulation, and transmission of FCIP frames on the connection. This table is supported only for Brocade 7500 and FR4-18i router blade. fcipTcpConnLocalPort 1.3.6.1.2.1.224.1.1.6.1.1 The local port number for this TCP connection.
9 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 • fcipExtendedLinkSlowStarts 1.3.6.1.4.1.1588.4.1.1.14 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 The ifIndex value of the virtual interface corresponding to the FCIP Link running over TCP/IP. fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 A counter containing the number of retransmitted segments for an FC data transfer over an FCIP tunnel. fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.
fcipExtendedLinkDupAck 1.3.6.1.4.1.1588.4.1.1.11 9 fcipExtendedLinkDupAck 1.3.6.1.4.1.1588.4.1.1.11 A counter containing duplicate acknowledgement packets. fcipExtendedLinkRtt 1.3.6.1.4.1.1588.4.1.1.12 The round trip time in milliseconds. fcipExtendedLinkOoo 1.3.6.1.4.1.1588.4.1.1.13 A counter containing TCP out-of-order. fcipExtendedLinkSlowStarts 1.3.6.1.4.1.1588.4.1.1.14 A counter containing slow starts.
9 xfcipExtendedLinkTcpDroppedPackets 1.3.6.1.4.1.1588.4.2.1.5 xfcipExtendedLinkTcpDroppedPackets 1.3.6.1.4.1.1588.4.2.1.5 The number of TCP packets dropped. xfcipExtendedLinkCompressionRatio 1.3.6.1.4.1.1588.4.2.1.6 The compression ratio. xfcipExtendedLinkTcpSmoothedRTT 1.3.6.1.4.1.1588.4.2.1.7 The round trip time (latency) in milliseconds. xfcipExtendedLinkRawBytes 1.3.6.1.4.1.1588.4.2.1.8 The total number of raw bytes sent or received. xfcipExtendedLinkCompressedBytes 1.3.6.1.4.1.1588.4.2.1.
Chapter 10 iSCSI MIB Objects In this chapter • iSCSI MIB overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiInstanceAttributesTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiNodeAttributesTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiSessionAttributesTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiSessionStatsTable . . . . . . . .
10 iSCSI MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - iscsimibmodule - iscsiObjects - iscsiInstance + iscsiInstanceAttributesTable - iscsiPortal - iscsiTargetPortal - iscsiInitiatorPortal - iscsiNode + iscsiNodeAttributesTable - iscsiTarget - iscsiTgtAuthorization - iscsiInitiator - iscsiIntrAuthorization - iscsiSession + iscsiSessionAttributesTable + iscsiSessionStatsTable - iscsiConnection + isciConnectionAttributesTable FIGURE 77 High level organization - iscsiInstanceAt
iSCSI MIB overview 10 - iscsiNodesAttributesEntry iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 iscsiNodeMaxBurstLength 1.3.6.
10 iscsiInstanceAttributesTable - iscsiConnectionAttributesEntry iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8 iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9 iscsiCxnMaxRecvDataSegLength 1.3.6.
iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 10 iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 An arbitrary integer that uniquely identifies a particular iSCSI instance. This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots.This value is not accessible. iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 A UTF-8 string to describe the iSCSI instance. Only a single instance is supported so the value will be 0.
10 iscsiInstSessionNumber 1.3.6.1.2.1.142.1.1.1.1.9 iscsiInstSessionNumber 1.3.6.1.2.1.142.1.1.1.1.9 The number of rows in the iscsiSessionAttributesTable that are currently associated with this iSCSI instance. iscsiInstSsnFailures 1.3.6.1.2.1.142.1.1.1.1.10 The number of times a session belonging to this instance has failed. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiDiscontinuityTime. Not supported. iscsiInstLastSsnFailureType 1.3.6.1.2.1.142.
iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 • • • • • • • • • • • • 10 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 iscsiNodeMaxBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.10 iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.11 iscsiNodeDataSequenceInOrder 1.3.6.1.2.1.142.1.1.5.1.1.12 iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13 iscsiNodeDefaultTime2Wait 1.3.6.1.2.1.142.1.1.5.1.1.
10 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 An object that indicates the InitialR2T preference for this node. When implemented, true=YES, false=will try to negotiate NO, but will accept YES. Not supported. iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 An object that indicates the ImmediateData preference for this node. When implemented, true=YES, but will accept NO, false=NO. Not supported. iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.
iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13 10 iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13 The preference for the order of iSCSI data PDUs within iSCSI data PDU sequences. False (NO) indicates that data PDUs may be transferred in any order within a sequence. True (YES) indicates that data PDUs must be transferred using continuously increasing addresses within a sequence, with no gaps or overlay between PDUs. Not supported. iscsiNodeDefaultTime2Wait 1.3.6.1.2.1.142.1.1.5.1.1.
10 iscsiSessionsAttributesEntry iscsiSessionsAttributesEntry An iscsiSessionsAttributesEntry comprises the following attributes: • • • • • • • • • • • • • • • • • • • • • iscsiSsnNodeIndex 1.3.6.1.2.1.142.1.1.10.1.1.1 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.4 iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.1.5 iscsiSsnTSIH 1.3.6.1.2.1.142.1.1.10.1.1.6 iscsiSsnISID 1.3.6.1.2.1.142.1.1.10.1.1.
iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 10 iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 Indicates the direction of the iSCSI session. inboundSession The session is established from an external initiator to a target within the iSCSI instance. outboundSession The session is established from an initiator within this iSCSI instance to an external target. For this release, the value of iSCSISsnDirection is always inboundSession. iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.
10 iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10 iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10 If set to true, indicates that the initiator must wait for an R2T before sending to the target. If set to false, the initiator may send data immediately, within limits set by iscsiSsnFirstBurstLength and the expected data transfer length of the request. iscsiSsnImmediateData 1.3.6.1.2.1.142.1.1.10.1.1.11 Indicates whether the initiator and target have agreed to support immediate data on this session.
iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 10 iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 False indicates that iSCSI data PDU sequences may be transferred in any order. True indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery.The default value for this is True. iscsiSsnDataPDUInOrder 1.3.6.1.2.1.142.1.1.10.1.1.19 False indicates that iSCSI data PDUs within sequences may be in any order.
10 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 The count of response PDUs transferred on this session. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 The count of data octets that were transmitted by the local iSCSI node on this session.
iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 • • • • • • • • • • • 10 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8 iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9 iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10 iscsiCxnMaxXmitDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.11 iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13 iscsiCxnRecvMarker 1.3.6.1.
10 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 The transport protocol over which this connection is running. This is hard coded to tcp (6). iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 The local transport protocol port used by this connection. This object cannot have the value zero, since it represents an established connection. This is hard coded to 3260 iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.
iscsiCxnSendMarker 1.3.6.1.2.1.142.1.1.11.1.1.15 10 iscsiCxnSendMarker 1.3.6.1.2.1.142.1.1.11.1.1.15 This object identifies whether or not this connection is inserting markers in its outgoing data stream. Hard coded to false. iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 Active version number of the SCSI specification negotiated on this connection. Hard coded to 0.
10 306 iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.
Chapter 11 USM MIB Objects In this chapter • USM MIB objects overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • usmMIBObjects group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • usmStats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • usmUser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 usmMIBObjects group - usmMIBObjects (1.3.6.1.6.3.15.1) - usmStats 1.3.6.1.6.3.15.1.1 - usmStatsUnsupportedSecLevels 1.3.6.1.6.3.15.1.1.1 - usmStatsNotInTimeWindows 1.3.6.1.6.3.15.1.1.2 - usmStatsUnknownUserNames 1.3.6.1.6.3.15.1.1.3 - usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 - usmStatsWrongDigests 1.3.6.1.6.3.15.1.1.5 - usmStatsDecryptionErrors 1.3.6.1.6.3.15.1.1.6 - usmUser 1.3.6.1.6.3.15.1.2 - usmUserSpinLock 1.3.6.1.6.3.15.1.2.1 - usmUserTable 1.3.6.1.6.3.15.1.2.2 - usmUserEntry 1.3.6.1.6.3.15.
usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 11 usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 The total number of packets received by the SNMP engine which were dropped because they referenced an snmpEngineID that was not known to the SNMP engine. usmStatsWrongDigests 1.3.6.1.6.3.15.1.1.5 The total number of packets received by the SNMP engine which were dropped because they did not contain the expected digest value. usmStatsDecryptionErrors 1.3.6.1.6.3.15.1.1.
11 usmUserSecurityName 1.3.6.1.6.3.15.1.2.2.1.3 usmUserSecurityName 1.3.6.1.6.3.15.1.2.2.1.3 A human-readable string representing the user in Security Model independent format. The default transformation of the User-based Security Model dependent security ID to the securityName and vice versa is the identity function so that the securityName is the same as the userName. usmUserCloneFrom 1.3.6.1.6.3.15.1.2.2.1.4 A pointer to another conceptual row in this usmUserTable.
usmUserOwnPrivKeyChange 1.3.6.1.6.3.15.1.2.2.1.10 11 usmUserOwnPrivKeyChange 1.3.6.1.6.3.15.1.2.2.1.10 Behaves exactly as usmUserPrivKeyChange, with one notable difference: For the Set operation to succeed, the usmUserName of the operation requester must match the usmUserName that indexes the row which is targeted by this operation. In addition, the USM security model must be used for this operation. usmUserPublic 1.3.6.1.6.3.15.1.2.2.1.
11 312 usmUserStatus 1.3.6.1.6.3.15.1.2.2.1.
Chapter 12 BD MIB In this chapter • BD MIB objects overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • BD MIB group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • bdTraps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • bdConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • bdStats . . . . . . .
12 BD MIB group - bdConfig - bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 - bdLThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.2 - bdCThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.3 - bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 - bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5 - bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.6 - nBdType 1.3.6.1.4.1.1588.2.1.1.51.1.7 FIGURE 87 bdConfig hierarchy - bdStats - bdNumOfEntries 1.3.6.1.4.1.1588.2.1.1.51.2.1 - bdStatsTable 1.3.6.1.4.1.1588.2.1.1.51.2.2 - bdStatsEntry 1.3.6.1.4.1.1588.2.1.1.51.2.2.
bdClearTrap 1.3.6.1.4.1.1588.2.1.1.51.0.2 12 This trap is sent for both latency bottleneck and congestion bottleneck with nBDType accordingly. This trap is triggered when the threshold is exceeded. bdClearTrap 1.3.6.1.4.1.1588.2.1.1.51.0.2 Variables “userPortNumber 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.1” “bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5” “nBdType 1.3.6.1.4.1.1588.2.1.1.51.1.7” “bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.6” “bdAggrStats 1.3.6.1.4.1.1588.2.1.1.51.2.3” “bdAbsoluteValue 1.3.6.1.4.1.1588.
12 bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 The minimum number of seconds between consecutive alerts. The value assigned to this parameter applies to both latency and congestion monitoring. In this duration, there will not be any traps sent. bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5 The time window in seconds over which the percentage of seconds affected by bottleneck conditions is computed and compared with the threshold. bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.
userPortNumber 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.1 12 userPortNumber 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.1 This object represents the user port indices of bottleneck monitored ports like F_port, E_port, L_port, and FCOE_port. bdSampleTime 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.2 This object represents the sample time. The value is returned in Epoch[Unix] time. bdType 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.3 This object represents the bottleneck type. Values • congestion (1) • latency (2) bdStatsValue10SecsSample 1.3.6.1.
12 bdAvgFrameSize 1.3.6.1.4.1.1588.2.1.1.51.2.5 bdAvgFrameSize 1.3.6.1.4.1.1588.2.1.1.51.2.5 This object represents the average size in bytes of all frames that were transmitted on the ports during the averaging window. Max Access accessible-for-notify This is accessible only for bdTrap and bdClearTrap.
Appendix A MIB Object Groupings In this appendix • Switch variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Sensor variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Port variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Event variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Event variables • fcFxPortTable 1.3.6.1.2.1.75.1.1.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 • Fx_Port Configuration Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 • fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 • Fx_Port Physical Level Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 • fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 . . . . . . . . . . . . . . .
iSCSI instance information variables A iSCSI instance information variables MIB variables that assist in gathering information about iSCSI instances are in the following tables. • iscsiInstanceAttributesTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 • iscsiNodeAttributesTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 • iscsiSessionStatsTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A 322 iSCSI instance information variables Fabric OS MIB Reference 53-1001768-01
Appendix B MIB OIDs and their Matching Object Names This appendix provides a listing of the MIB object names and the corresponding MIB Object ID (OID) associated with each. MIB OIDs Table 26 allows you to identify a MIB object name according to its related OID. TABLE 26 Fabric OS MIB Reference 53-1001768-01 MIB object name/OID matrix MIB object name OID Page no. iso 1 page 22 org 1.3 page 22 dod 1.3.6 page 22 internet 1.3.6.1 page 22 directory 1.3.6.1.1 page 22 mgmt 1.3.6.1.
B MIB OIDs TABLE 26 324 MIB object name/OID matrix (Continued) MIB object name OID Page no. ifPhysAddress 1.3.6.1.2.1.2.2.1.6 page 34 ifAdminStatus 1.3.6.1.2.1.2.2.1.7 page 34 ifOperStatus 1.3.6.1.2.1.2.2.1.8 page 34 ifLastChange 1.3.6.1.2.1.2.2.1.9 page 35 ifInOctets 1.3.6.1.2.1.2.2.1.10 page 35 ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 page 35 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 page 35 ifInDiscards 1.3.6.1.2.1.2.2.1.13 page 35 ifInErrors 1.3.6.1.2.1.2.2.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. ipReasmTimeout 1.3.6.1.2.1.4.13 page 39 ipReasmReqds 1.3.6.1.2.1.4.14 page 39 ipReasmOKs 1.3.6.1.2.1.4.15 page 39 ipReasmFails 1.3.6.1.2.1.4.16 page 39 ipFragOKs 1.3.6.1.2.1.4.17 page 40 ipFragFails 1.3.6.1.2.1.4.18 page 40 ipFragCreates 1.3.6.1.2.1.4.19 page 40 ipAddrTable 1.3.6.1.2.1.4.20 page 40 ipAddrEntry 1.3.6.1.2.1.4.20.
B MIB OIDs TABLE 26 326 MIB object name/OID matrix (Continued) MIB object name OID Page no. icmp 1.3.6.1.2.1.5 page 22 icmpInMsgs 1.3.6.1.2.1.5.1 page 45 icmpInErrors 1.3.6.1.2.1.5.2 page 45 icmpInDestUnreachs 1.3.6.1.2.1.5.3 page 45 icmpInTimeExcds 1.3.6.1.2.1.5.4 page 45 icmpInParmProbs 1.3.6.1.2.1.5.5 page 45 icmpInSrcQuenchs 1.3.6.1.2.1.5.6 page 45 icmpInRedirects 1.3.6.1.2.1.5.7 page 45 icmpInEchos 1.3.6.1.2.1.5.8 page 45 icmpInEchoReps 1.3.6.1.2.1.5.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. tcpCurrEstab 1.3.6.1.2.1.6.9 page 49 tcpInSegs 1.3.6.1.2.1.6.10 page 49 tcpOutSegs 1.3.6.1.2.1.6.11 page 49 tcpRetransSegs 1.3.6.1.2.1.6.12 page 49 tcpConnTable 1.3.6.1.2.1.6.13 page 49 tcpConnEntry 1.3.6.1.2.1.6.13.1 page 49 tcpConnState 1.3.6.1.2.1.6.13.1.1 page 49 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 page 50 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.
B MIB OIDs TABLE 26 328 MIB object name/OID matrix (Continued) MIB object name OID Page no. snmpInTotalReqVars 1.3.6.1.2.1.11.13 page 53 snmpInTotalSetVars 1.3.6.1.2.1.11.14 page 54 snmpInGetRequests 1.3.6.1.2.1.11.15 page 54 snmpInGetNexts 1.3.6.1.2.1.11.16 page 54 snmpInSetRequests 1.3.6.1.2.1.11.17 page 54 snmpInGetResponses 1.3.6.1.2.1.11.18 page 54 snmpInTraps 1.3.6.1.2.1.11.19 page 54 snmpOutTooBigs 1.3.6.1.2.1.11.20 page 54 snmpOutNoSuchNames 1.3.6.1.2.1.11.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. etherStatsPkts64Octets 1.3.6.1.2.1.16.1.1.1.14 page 58 etherStatsPkts65to127Octets 1.3.6.1.2.1.16.1.1.1.15 page 59 etherStatsPkts128to255Octets 1.3.6.1.2.1.16.1.1.1.16 page 59 etherStatsPkts256to511Octets 1.3.6.1.2.1.16.1.1.1.17 page 59 etherStatsPkts512to1023Octets 1.3.6.1.2.1.16.1.1.1.18 page 59 etherStatsPkts1024to1518Octets 1.3.6.1.2.1.16.1.1.1.
B MIB OIDs TABLE 26 330 MIB object name/OID matrix (Continued) MIB object name OID Page no. logIndex 1.3.6.1.2.1.16.9.2.1.2 page 63 logTime 1.3.6.1.2.1.16.9.2.1.3 page 63 logDescription 1.3.6.1.2.1.16.9.2.1.4 page 63 ifMIB 1.3.6.1.2.1.31 page 22 ifXTable 1.3.6.1.2.1.31.1.1 page 63 ifXentry 1.3.6.1.2.1.31.1.1.1 page 63 ifName 1.3.6.1.2.1.31.1.1.1.1 page 63 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 page 64 ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 page 127 entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 page 127 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 page 127 entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 page 128 entPhysicalSerialNum 1.3.6.1.2.1.47.1.1.1.1.11 page 128 entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 page 128 entPhysicalModelName 1.3.6.
B MIB OIDs TABLE 26 332 MIB object name/OID matrix (Continued) MIB object name OID Page no. entityMIBTrapPrefix 1.3.6.1.2.1.47.2.0 page 118 entConfigChange 1.3.6.1.2.1.47.2.0.1 page 136 entityConformance 1.3.6.1.2.1.47.3 page 118 entityCompliances 1.3.6.1.2.1.47.3.1 page 118 entityCompliance 1.3.6.1.2.1.47.3.1.1 page 136 entity2Compliance 1.3.6.1.2.1.47.3.1.2 page 136 entityGroups 1.3.6.1.2.1.47.3.2 page 118 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 page 82 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 page 83 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8 page 83 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 page 83 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 page 83 fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 page 83 fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.
B MIB OIDs TABLE 26 334 MIB object name/OID matrix (Continued) MIB object name OID Page no. fcFeError 1.3.6.1.2.1.75.1.3 page 73 fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 page 88 fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 page 89 fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.1 page 89 fcFxPortSyncLosses 1.3.6.1.2.1.75.1.3.1.1.2 page 89 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 page 89 fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 page 89 fcFxPortInvalidTxWords 1.3.6.1.2.1.75.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 page 92 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 page 93 fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 page 93 fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1 page 93 fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2 page 93 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 page 93 fcFxPortC3OutOctets 1.3.6.1.2.1.75.
B MIB OIDs TABLE 26 336 MIB object name/OID matrix (Continued) MIB object name OID Page no. iscsiInstanceAttributesEntry 1.3.6.1.2.1.142.1.1.1.1 page 292 iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 page 293 iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 page 293 iscsiInstVersionMin 1.3.6.1.2.1.142.1.1.1.1.3 page 293 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.4 page 293 iscsiInstVendorID 1.3.6.1.2.1.142.1.1.1.1.5 page 293 iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 page 299 iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.4 page 299 iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.1.5 page 299 iscsiSsnTSIH 1.3.6.1.2.1.142.1.1.10.1.1.6 page 299 iscsiSsnISID 1.3.6.1.2.1.142.1.1.10.1.1.7 page 299 iscsiSsnInitiatorAlias 1.3.6.1.2.1.142.1.1.10.1.1.8 page 299 iscsiSsnTargetAlias 1.
B MIB OIDs TABLE 26 338 MIB object name/OID matrix (Continued) MIB object name OID Page no. iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10 page 304 iscsiCxnMaxXmitDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.11 page 304 iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 page 304 iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13 page 304 iscsiCxnRecvMarker 1.3.6.1.2.1.142.1.1.11.1.1.14 page 304 iscsiCxnSendMarker 1.3.6.1.2.1.142.1.1.11.1.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. fcipTcpConnLocalPort 1.3.6.1.2.1.224.1.1.6.1.1 page 285 fcipTcpConnRemPort 1.3.6.1.2.1.224.1.1.6.1.2 page 285 fcipTcpConnRWSize 1.3.6.1.2.1.224.1.1.6.1.3 page 285 fcipTcpConnMSS 1.3.6.1.2.1.224.1.1.6.1.4 page 285 fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 page 281 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 page 286 fcipExtendedLinkTcpRetransmits 1.
B MIB OIDs TABLE 26 340 MIB object name/OID matrix (Continued) MIB object name OID Page no. fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 page 102 fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 page 102 fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 page 102 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 page 102 fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 page 103 fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 page 103 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 page 103 fcFeModuleLastChange 1.3.6.1.3.42.2.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 page 107 fcFxPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 page 107 fcFxPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 page 107 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 page 108 fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 page 108 fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 page 108 fcFxPortPhysTable 1.3.6.1.3.42.2.1.
B MIB OIDs TABLE 26 342 MIB object name/OID matrix (Continued) MIB object name OID Page no. fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 page 112 fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 page 112 fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 page 113 fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 page 113 fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 page 113 fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.9 page 113 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. connUnitTable 1.3.6.1.3.94.1.6 page 237 connUnitEntry 1.3.6.1.3.94.1.6.1 page 237 connUnitId 1.3.6.1.3.94.1.6.1.1 page 237 connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 page 237 connUnitType 1.3.6.1.3.94.1.6.1.3 page 238 connUnitNumports 1.3.6.1.3.94.1.6.1.4 page 238 connUnitState 1.3.6.1.3.94.1.6.1.5 page 239 connUnitStatus 1.3.6.1.3.94.1.6.1.
B MIB OIDs TABLE 26 344 MIB object name/OID matrix (Continued) MIB object name OID Page no. connUnitSensorTable 1.3.6.1.3.94.1.8 page 245 connUnitSensorEntry 1.3.6.1.3.94.1.8.1 page 245 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 page 245 connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 page 245 connUnitSensorName 1.3.6.1.3.94.1.8.1.3 page 245 connUnitSensorStatus 1.3.6.1.3.94.1.8.1.4 page 245 connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 page 246 connUnitSensorMessage 1.3.6.1.3.94.1.8.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. connUnitEventEntry 1.3.6.1.3.94.1.11.1 page 256 connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 page 257 connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 page 257 connUnitEventId 1.3.6.1.3.94.1.11.1.3 page 257 connUnitREventTime 1.3.6.1.3.94.1.11.1.4 page 257 connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 page 258 connUnitEventSeverity 1.3.6.1.3.94.1.11.1.
B MIB OIDs TABLE 26 346 MIB object name/OID matrix (Continued) MIB object name OID Page no. statSet 1.3.6.1.3.94.4 page 262 connUnitPortStatTable 1.3.6.1.3.94.4.5 page 263 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 page 263 connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 page 263 connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 page 263 connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 page 263 connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 page 263 connUnitPortStatCountRxObjects 1.3.6.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. connUnitPortStatCountTxLinkResets 1.3.6.1.3.94.4.5.1.34 page 269 connUnitPortStatCountNumberLinkResets 1.3.6.1.3.94.4.5.1.35 page 269 connUnitPortStatCountRxOfflineSequences 1.3.6.1.3.94.4.5.1.36 page 269 connUnitPortStatCountTxOfflineSequences 1.3.6.1.3.94.4.5.1.37 page 269 connUnitPortStatCountNumberOffline Sequences 1.3.6.1.3.94.4.5.1.
B MIB OIDs TABLE 26 348 MIB object name/OID matrix (Continued) MIB object name OID Page no. connUnitSnsPortIPAddress 1.3.6.1.3.94.5.2.1.1.11 page 273 connUnitSnsFabricPortName 1.3.6.1.3.94.5.2.1.1.12 page 273 connUnitSnsHardAddress 1.3.6.1.3.94.5.2.1.1.13 page 273 connUnitSnsSymbolicPortName 1.3.6.1.3.94.5.2.1.1.14 page 273 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 page 274 private 1.3.6.1.4 page 142 enterprises 1.3.6.1.4.1 page 142 bcsi 1.3.6.1.4.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 page 164 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 page 164 swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 page 164 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 page 164 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 page 165 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 page 165 swBeaconAdmStatus 1.3.6.1.
B MIB OIDs TABLE 26 350 MIB object name/OID matrix (Continued) MIB object name OID Page no. swPmgrEventDescr 1.3.6.1.4.1.1588.2.1.1.1.2.14 page 172 swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.15 page 172 swModule 1.3.6.1.4.1.1588.2.1.1.1.3 page 142 swAgtCfg 1.3.6.1.4.1.1588.2.1.1.1.4 page 142 swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.11 page 173 swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 page 173 swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 page 173 swAgtCmtyStr 1.3.6.1.4.1.1588.2.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 page 179 swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 page 179 swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 page 179 swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 page 179 swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 page 179 swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
B MIB OIDs TABLE 26 352 MIB object name/OID matrix (Continued) MIB object name OID Page no. swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 page 184 swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 page 184 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 page 184 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 page 184 swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 page 184 swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 page 185 swEventVfid 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 page 189 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 page 190 swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 page 190 swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 page 190 swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 page 191 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 page 191 swFwLabel 1.3.6.
B MIB OIDs TABLE 26 354 MIB object name/OID matrix (Continued) MIB object name OID Page no. swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 page 198 swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3 page 198 swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4 page 198 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 page 199 swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6 page 199 swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7 page 199 swBlmPerfFltMntTable 1.3.6.1.4.1.1588.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 page 200 swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 page 200 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 page 200 swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 page 200 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 page 200 swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.
B MIB OIDs TABLE 26 356 MIB object name/OID matrix (Continued) MIB object name OID Page no. swMemUsageLimit3 1.3.6.1.4.1.1588.2.1.1.1.26.12 page 204 swConnUnitPortStatExtentionTable 1.3.6.1.4.1.1588.2.1.1.1.27 page 142 swConnUnitPortStatEntry 1.3.6.1.4.1.1588.2.1.1.1.27.1 page 204 swConnUnitCRCWithBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.1 page 204 swConnUnitZeroTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.2 page 204 swConnUnitFLNumOfTenancy 1.3.6.1.4.1.1588.2.1.1.1.27.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. nodeRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 page 222 nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 page 222 nodeRNIDConnectedPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.10 page 222 nodeRNIDPortType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.11 page 222 nodeRNIDFormat 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.12 page 222 nodeRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.
B MIB OIDs TABLE 26 358 MIB object name/OID matrix (Continued) MIB object name OID Page no. rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 page 225 rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 page 225 rLIRIncidentNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 page 225 rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 page 226 rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 page 226 rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 page 226 rLIRConnectedPortWwn 1.3.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. bdSampleTime 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.2 page 317 bdType 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.3 page 317 bdStatsValue10SecsSample 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.4 page 317 bdStatsValue60SecsSample 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.5 page 317 bdStatsValue300SecsSample 1.3.6.1.4.1.1588.2.1.1.51.2.2.1.6 page 317 bdAggrStats 1.3.6.1.4.1.1588.2.1.1.51.2.
B MIB OIDs TABLE 26 360 MIB object name/OID matrix (Continued) MIB object name OID Page no. haMIBTraps 1.3.6.1.4.1.1588.2.1.2.2 page 207 haMIBTrapPrefix 1.3.6.1.4.1.1588.2.1.2.2.0 page 208 fruStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.1 page 214 cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 page 214 fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 page 215 bsciReg 1.3.6.1.4.1.1588.3 page 142 bsciModules 1.3.6.1.4.1.1588.3.1 page 142 bcsiModculeTC 1.3.6.1.4.1.1588.3.1.
MIB OIDs TABLE 26 Fabric OS MIB Reference 53-1001768-01 B MIB object name/OID matrix (Continued) MIB object name OID Page no. usmUserPrivProtocol 1.3.6.1.6.3.15.1.2.2.1.8 page 310 usmUserPrivKeyChange 1.3.6.1.6.3.15.1.2.2.1.9 page 310 usmUserOwnPrivKeyChange 1.3.6.1.6.3.15.1.2.2.1.10 page 311 usmUserPublic 1.3.6.1.6.3.15.1.2.2.1.11 page 311 usmUserStorageType 1.3.6.1.6.3.15.1.2.2.1.12 page 311 usmUserStatus 1.3.6.1.6.3.15.1.2.2.1.
B 362 MIB OIDs Fabric OS MIB Reference 53-1001768-01
Index A accounting group, 90, 113 address translation group, 36 ASIC performance monitoring group, 197 B BD MIB Group, 314 before loading MIBs, 8 Brocade MIB files, 7 C capability group, 93, 114 commands, 17 errShow, 5 snmpConfig, 4, 17 snmpMibCapSet, 17 snmpMibCapShow, 17 switchStatusPolicySet, 5 configuration group, 79, 101 configuring SNMP, 17 connectivity group, 236, 281, 283, 292, 294, 297, 301 CPU or memory usage group, 203 D definitions for entity MIB, 120 definitions for Fcfabric-Element-MIB, 99
I S ICMP group, 44 interfaces group, 31 interfaces table, 32 IP group, 37 iSCSI, 289 iSCSI MIB Organization, 279, 289 iSCSI MIB Overview, 279, 289 ISL and end device variables, 320 sensor variables, 319 Series 3000 Variables, 320, 321 service group, 271 SNMP configuration variables, 320 SNMP group, 52 SNMP trap registration group, 274 SNMP traps for ficon, 217 snmpConfig command, 4, 17 snmpMibCapSet command, 17 snmpMibCapShow command, 17 statistics group, 262 status group, 84 sw agent configuration group
